HELLO AGAIN! This is nothing new. I took a look at my old video and told myself i can do better lol. So here i made another video! In this one ill show you how to change the cables too. IN CASE i get copyrighted, im just gonna put my old video back😒✌
@feltronium I'm having the same problem. what dod you end up doing? I think the best solution for me right now is to use paracord to act as the string temporarily. pull the paracord as if it were the bowstring, then insert screwdriver and replace string.
The way everyone online makes it sound, is that it's very difficult to change a string on a compound crossbow. You just made it look like a cakewalk and made my day. Thank you. :)
5 years later and this man’s video is still the best I’ve seen. Every time I would look it up people would just be saving that you need all this fancy equipment and stuff when in reality you just need a screwdriver and a nice pair of balls 👍
The crossbow went together quickly and the general fit and finish is a bit above what I expected for the price. th-cam.com/users/postUgkx5B43Qabqt1HedUJyfEqxiwBCfaooIH52 The adjustable stock is a little loose. I had an issue when I tried to cock the bow for the first time with the safety on. The string set in the trap box, held just enough to build up enough tension to rip the string out of my hands when it let go. No significant damage was done, and once I got it sighted in, I wrecked a couple bolts by sending one straight down the shaft of the first. I'm holding ~2" groups at around 50 yards, and I'm not an expert by any means. Best part is that they supply all the replacements parts you may ever need
K C something terrible will happen when you try and “Jerry rig” am install like this. You’re most likely going to lose a finger it the screw driver loses its traction. How the hell do you expect the cams to be tune correctly by installing the string on the crossbow the way he did? You’re just asking for trouble. If you want to just get a recurve and call it a day. Because I doubt he’s shooting bulleyes after he reinstalled his strings and cables.
@@boots_4_me i can see why you would think that but im not a newb, i know how to time my cams heck i lost track to how many bows ive fixed for my people haha And no i dont think its gonna loose traction when theres 155lb holding it in place, only thing that can go wrong is if you didnt place whatever thing all the way into the cam. But still this method isn't for all the crossbows in the world. At the end of the day this is something that WORKS that i shared cause maybe someone can use this trick if they ever have to replace something out in the field. I still use my bow press for everything tho. And my huntings never been better 👌
You sir are really smart. And because of that you will always be the og daryl of TH-cam. Love the music, im willing to bet you some kid is gonna copy you and steal that song too lol
Thank you!!! My string broke while bow hunting for first time this year and the closest shop said it would take Atleast a week to fix, when I can have my new string here in three, days from order day. so thank you for this video for sure, My bow center point amped 415.
Bastard string, 🤷 maybe people don’t know that one? It’s an extra long string that just lets you pull the bow into position, it’s typically used on a simple bow but using this fellows pin method maybe it would work. Maybe I should make a video?
@@12clockhitter82 I suggest just taking it into a archery bow store or Bass pro, something like that and having them repair it since we're not in the apocalypse just yet. 😅👍
@@12clockhitter82 the only way that I know how to restring a crossbow is with ratchet straps. But I have never done that myself only seen a video of it. That's why I'm probably switching back to a recurve crossbow.
@@sonnymichael Recurve all the way. Easy string change and have plenty of spares. A broken string can be replaced by simply stringing some cordage on the crossbow to pull the limbs up before adding a new string.
Hmm i never actually tried it surprisingly. good idea. Im gonna see if its possible soon, if i dont upload a video about it its probably because i couldn't do it lol
Hey Bro! This is quite awesome!! Would this also works on my Hori-Zone Kornet MX 405? I see the cams of your PSE are similar to my Hori-Zone cams. I'm a bit worried about doing this with a 200 pounds crossbow, but maybe you could tell me more. Do you think I could broke my limbs or cams by trying this? Thank you! You're the best! Thanks a lot for your videos! Greetings from Austria ✌️
Yes all these crossbows have the same top bow design. But since your bow is 400lb id recommend loosen the top bolts a few times to make it a bit weaker then do it. You dont want to put to much pressure on the limbs
You are the man I brought my thing 352 my local shop and they said they do not work on PSE gave me some BS excuse about not being in their insurance they just don't sell that company and I don't think they want to work on their products everywhere's I look said I need to get a bow press and all this BS when I have 100 screwdrivers laying around going to try it today thank you so much
Hey, I don’t know if you are still replying to comments or not but does this method work on a carbon express piledriver 390 and if so will this screwdriver method damage the limbs at all?
269/1000 实时翻译 划译 你好，我曾经Hello, I once asked Barnett's official staff, and they said that the crossbow needs to adjust the wheel synchronization, but I don't know how to do it. Can you give me a lesson? There is no tutorial related to this issue on the website. If possible, thank you very much
This is getting annoying with all the 28 days later comments. I didnt even know that was from a movie i just found it and used it. But everyones still getting butthurt for me using it for some reason. God damn
A late answer but I'm thinking about this question myself atm. I think I'd buy or make a string a few inches longer than the one I need so it'll go over the limbs easier then from that point on as per this video. Same principle as the stringing aids for recurve xbows.
Replacing the bowstring works on a Mankung Kraken, but I think replacing the cableset won't work because you have to pull the cableloop through the riser.
Im not sure what crossbow you have, everyone is trying this method with different crossbows which is dangerous. This tutorial was specifically for the fang. With the fang you can also loosen the 2 top bolts of the limbs just enough to also replace the strings and cables that way
Not picking as im only 1.5 week into crossbowes, but it seems your string is very loose when ready to be cocked. I can't even barely get it off the string stops.
Doom Racing i might've loosed the limbs a bit to demonstrate easier for the video i dont remember, either way i cock this thing by hand all the time, your crossbow may be a bit more powerful, mines 155lb
Hey I just bought my first crossbow and the string jumped off after my friend hit the back of a chair when he shot.. 1 shot was all I got after about crossbows for 35 years... and now I don't know what I'm doing and there's nobody to ask since I'm in Norway where they hate crossbows. Could you help a very depressed Scandinavian? It's a bear Intense regards mattias
@@nonsheep5823hey just asking for a follow up on the cross ow you did this to? I'm new to crossbows and have heard that doing this can mess the timing up and whatnot? which I don't even know what that means lol. but could you elaborate for me?
@@nonsheep5823 aww damg that really disappoints me because I just got my bow and I'm so eager to shoot it I've only shot it a few times before my dumbahh either didn't seat the bolt all the way or when I put the nock in the bolt I didn't put it in the correct way. so lesson learned either way. if you couldn't already tell I've never owned a crossbow before so
@@TannerVarrasse same thing happed to my adder , bolt blew out the magazine loader , single recurve crossbows are best in a way bastard to cock but cheap and easy to maintain
So many questions like wats this fella wearing n why is he using the song from 28 days later for such an unsuspensful crossbow tutorial? But still like his process 👌
If the cam breaks your crossbow is cheap af and theres already 160lb of pressure on that cam anyway with that string squeezing it. if your scared dont try it simple
HELLO AGAIN! This is nothing new. I took a look at my old video and told myself i can do better lol. So here i made another video! In this one ill show you how to change the cables too. IN CASE i get copyrighted, im just gonna put my old video back😒✌
Thanks for the video, could you please help me ? I need to put a new string on but the old cable snapped
72v 23rd
@feltronium I'm having the same problem. what dod you end up doing? I think the best solution for me right now is to use paracord to act as the string temporarily. pull the paracord as if it were the bowstring, then insert screwdriver and replace string.
The way everyone online makes it sound, is that it's very difficult to change a string on a compound crossbow. You just made it look like a cakewalk and made my day. Thank you. :)
5 years later and this man’s video is still the best I’ve seen. Every time I would look it up people would just be saving that you need all this fancy equipment and stuff when in reality you just need a screwdriver and a nice pair of balls 👍
The crossbow went together quickly and the general fit and finish is a bit above what I expected for the price. th-cam.com/users/postUgkx5B43Qabqt1HedUJyfEqxiwBCfaooIH52 The adjustable stock is a little loose. I had an issue when I tried to cock the bow for the first time with the safety on. The string set in the trap box, held just enough to build up enough tension to rip the string out of my hands when it let go. No significant damage was done, and once I got it sighted in, I wrecked a couple bolts by sending one straight down the shaft of the first. I'm holding ~2" groups at around 50 yards, and I'm not an expert by any means. Best part is that they supply all the replacements parts you may ever need
The music makes me feel like something terrible is about to happen.
K C something terrible will happen when you try and “Jerry rig” am install like this. You’re most likely going to lose a finger it the screw driver loses its traction. How the hell do you expect the cams to be tune correctly by installing the string on the crossbow the way he did? You’re just asking for trouble. If you want to just get a recurve and call it a day. Because I doubt he’s shooting bulleyes after he reinstalled his strings and cables.
@@boots_4_me I did it and it went smoothly and the bow is still accurate at 40.
@@boots_4_me i can see why you would think that but im not a newb, i know how to time my cams heck i lost track to how many bows ive fixed for my people haha And no i dont think its gonna loose traction when theres 155lb holding it in place, only thing that can go wrong is if you didnt place whatever thing all the way into the cam. But still this method isn't for all the crossbows in the world. At the end of the day this is something that WORKS that i shared cause maybe someone can use this trick if they ever have to replace something out in the field. I still use my bow press for everything tho.
And my huntings never been better 👌
So simple ... also pretty smart and easy, we tend to over think things sometimes , myself the worst. Thanks for sharing.
The man, the myth, the legend.
You sir are really smart. And because of that you will always be the og daryl of TH-cam. Love the music, im willing to bet you some kid is gonna copy you and steal that song too lol
jesus rovia that is true
Thank you!!! My string broke while bow hunting for first time this year and the closest shop said it would take Atleast a week to fix, when I can have my new string here in three, days from order day. so thank you for this video for sure, My bow center point amped 415.
Currious if you got it on without a bow press?
@@proles101 impossible as far as i know.
Bastard string, 🤷 maybe people don’t know that one?
It’s an extra long string that just lets you pull the bow into position, it’s typically used on a simple bow but using this fellows pin method maybe it would work.
Maybe I should make a video?
I dont know about blocking just one cam at a time. Seems like a lot of tension for one cam and limb. Maybe block both cams?
Trust me I'll be liking the next vids
Good shortcut. Used it today
Does it still work after u did it?
This is a great video and it helped me.
Thanks pyjamas and slippers seamed to be the key, im gona buy some and give it ago , thanks dude 😊
What if string is broken that you are replacing..so no string on bow to start with to pull back is there a trick for that or going to need a press
tie paracord where the string would normally go to act as a temporary string just to get it to where you can get a screwdriver wedged in the cam
Did you have to adjust the timing of the crossbow afterwords?
Does this risk damaging the arms or wheels?
What if my string snapped and there is no string on the bow?
Same thing just happened to me now 😭I tried use a used arrow on it 😂snapped on me straight away
@@12clockhitter82 I suggest just taking it into a archery bow store or Bass pro, something like that and having them repair it since we're not in the apocalypse just yet. 😅👍
@@sonnymichael 😂😂your right I don’t want to mess around with it
@@12clockhitter82 the only way that I know how to restring a crossbow is with ratchet straps. But I have never done that myself only seen a video of it. That's why I'm probably switching back to a recurve crossbow.
@@sonnymichael Recurve all the way. Easy string change and have plenty of spares. A broken string can be replaced by simply stringing some cordage on the crossbow to pull the limbs up before adding a new string.
Do you have a video on how to un cock the fang crossbow??
Hmm i never actually tried it surprisingly. good idea. Im gonna see if its possible soon, if i dont upload a video about it its probably because i couldn't do it lol
This man is a genius 👏
Didn't you bend your cams with this method?
I wish he'd answer this
I didn't bend them.... there as good as when I got them
For some reason, I can't restring my Barnett white Tail Pro str.
Awesome bud!! I don’t have the balls to do this to my fang!!😂😂😂
LT.PRODUCTIONS dont worry it took me almost a year to try! Atleast now YOU know it works haha i had to try it for the first time ever lol
JerryStinger's StuffandThangs I appreciate the video if I ever want to do it..
How do I do it if I don’t have a string on there to begin with ?
Hey Bro!
This is quite awesome!!
Would this also works on my Hori-Zone Kornet MX 405? I see the cams of your PSE are similar to my Hori-Zone cams.
I'm a bit worried about doing this with a 200 pounds crossbow, but maybe you could tell me more. Do you think I could broke my limbs or cams by trying this?
Thank you!
You're the best!
Thanks a lot for your videos!
Greetings from Austria ✌️
Here's a link to the Hori-Zone crossbow www.crossbowadventure.at/armbrust/armbrust-hori-zone/hori-zone-kornet-mx-405/
Yes all these crossbows have the same top bow design. But since your bow is 400lb id recommend loosen the top bolts a few times to make it a bit weaker then do it. You dont want to put to much pressure on the limbs
JerryStinger's StuffandThangs Thank you so much!
You are the man I brought my thing 352 my local shop and they said they do not work on PSE gave me some BS excuse about not being in their insurance they just don't sell that company and I don't think they want to work on their products everywhere's I look said I need to get a bow press and all this BS when I have 100 screwdrivers laying around going to try it today thank you so much
Man , it is so easy , thanks !
Donde comprar cuerda de disparo 34 o 35 pulgadas para la archery 405 dagger
Brilliant 👍NO BOW PRESS REQUIRED 👍
Did you back the screws out before this?
How do I compress the limbs is the main string is broken?
Honestly I don't know why this channel hasn't hi 1million subs already
Koby James Thanks man that means a lot! lol
I'm really glad to see a big Daryl fan most people are going for Carl now that he's dead
And thanks for the awesome videos keep it up bro!!??😎
La cosa que utilizaste para cargarla es para darle como aflojar la cuerda?
I am a very big fan and love Daryl Dixon
Can you do this on a Barnett Predator & Barnett Ghost 420??
28 days later theme song! In a heartbeat
man you are a life saver ,, god bless you
Hey, I don’t know if you are still replying to comments or not but does this method work on a carbon express piledriver 390 and if so will this screwdriver method damage the limbs at all?
Where did you get the replacement string from?
Will Hood i didnt get one. I took it off and put it back on...😂🤣🤣
You can find them online ive found a few for a old ass Barnet crossbow of my grandfathers
Oh boy........we got a real winner here folks 🤦♂️😂😂😂
Great video!.... Awesome slippers!
Thanks😁
269/1000
实时翻译
划译
你好，我曾经Hello, I once asked Barnett's official staff, and they said that the crossbow needs to adjust the wheel synchronization, but I don't know how to do it. Can you give me a lesson? There is no tutorial related to this issue on the website. If possible, thank you very much
Omg works for me 😊😊thanks
This is getting annoying with all the 28 days later comments. I didnt even know that was from a movie i just found it and used it. But everyones still getting butthurt for me using it for some reason. God damn
I need help. I have a sniper 370 center point and I can't take the third one on the middle I manage all but one
U gotta have something in the cams on BOTH sides of the limbs, maybe 2 screwdrivers, if you just have 1 one cable will still have tension
Or you can just switch sides of the screwdriver to the other cam like in the video
What music is that
Always service your crossbow before zombie apocalypse!
Also teach Crassbow shooting
THANK YOU!
What if your string is already broken
A late answer but I'm thinking about this question myself atm. I think I'd buy or make a string a few inches longer than the one I need so it'll go over the limbs easier then from that point on as per this video. Same principle as the stringing aids for recurve xbows.
Can this work with center point sniper elite 370 185 draw weight 370 FPS is this sage to do?
Excellent job 👏 👍 👌
Replacing the bowstring works on a Mankung Kraken, but I think replacing the cableset won't work because you have to pull the cableloop through the riser.
Just bought a Kraken, how you finding it?
But how do I do it when my string snapped off?.so. Can't cock it to begin with
I mean, your not supposed to use the crossbow until the string snaps, you supposed to replace the string once the serving gets damaged.
Im not sure what crossbow you have, everyone is trying this method with different crossbows which is dangerous. This tutorial was specifically for the fang. With the fang you can also loosen the 2 top bolts of the limbs just enough to also replace the strings and cables that way
Not picking as im only 1.5 week into crossbowes, but it seems your string is very loose when ready to be cocked. I can't even barely get it off the string stops.
Doom Racing i might've loosed the limbs a bit to demonstrate easier for the video i dont remember, either way i cock this thing by hand all the time, your crossbow may be a bit more powerful, mines 155lb
Excelente el vídeo de cambio de cuerda de la ballesta 👍
How do you replace string if string is broken?
Where can i find the cable and the string
Alex 1172 most bow shops can make you one
Hey I just bought my first crossbow and the string jumped off after my friend hit the back of a chair when he shot.. 1 shot was all I got after about crossbows for 35 years... and now I don't know what I'm doing and there's nobody to ask since I'm in Norway where they hate crossbows. Could you help a very depressed Scandinavian? It's a bear Intense regards mattias
Is it the same model as this? They're all different and some stuff wont work with others
Easy way... thanks
But my string is broken and my cables are not so I can’t do that
Your supposed to replace them whenever the servings wear not until it snaps
Hi boss can tell me how heavy the cam ?? Plssss thks
try doing it when your shooting string is already broken....different story then
Never said it worked that way...
And on this model crossbow you can still change it even if the string is broken.... just loosen the limbs i have a video on it already
North slide track😢
hey i got one question
can you make the string by yourself ?
Music from 28 days later.
No way really?
@@Jerrez yeah ! ,not the intro music but the music playing whilst you are stringing up ,p.s thanks for the vid i didnt have a clue how to do it.
Omg Thanks man 💪
your the fuckin man you just saved my day
My fang string is a lot tighter than that
Ur awesome Jerry
Chandler Childress ur awesome for supporting my channel man!
Does anyone know if this process works for a ek blade?
Just done it on my ek hex 400 used 2 electrical screwdrivers so it didn't mark anything
@@nonsheep5823hey just asking for a follow up on the cross ow you did this to? I'm new to crossbows and have heard that doing this can mess the timing up and whatnot? which I don't even know what that means lol. but could you elaborate for me?
@@TannerVarrasse don't do it it damaged my cambs, I take it to a guy now he charges me £30 well worth the money bow press is only way
@@nonsheep5823 aww damg that really disappoints me because I just got my bow and I'm so eager to shoot it I've only shot it a few times before my dumbahh either didn't seat the bolt all the way or when I put the nock in the bolt I didn't put it in the correct way. so lesson learned either way. if you couldn't already tell I've never owned a crossbow before so
@@TannerVarrasse same thing happed to my adder , bolt blew out the magazine loader , single recurve crossbows are best in a way bastard to cock but cheap and easy to maintain
So many questions like wats this fella wearing n why is he using the song from 28 days later for such an unsuspensful crossbow tutorial? But still like his process 👌
🙄
You call removing a string off of a 160lb crossbow that can explode any second unsuspenseful?
@@rogerwilson4076 lmao
thank you
Por cierto me gustó tu video
Gracias!!🖒🖒
JerryStinger's StuffandThangs gracias a ti:v
Y tu que haces para que quede así de sensible
el maloso boby :v pronto voy hacer un video de como hacer la ballesta menos poderosa🖒
Es un buen consejo
I wont even take my slippers off!
Damn! Lol
If that cam would break for any reason, say good bye to your fingers..
If the cam breaks your crossbow is cheap af and theres already 160lb of pressure on that cam anyway with that string squeezing it. if your scared dont try it simple
That can't be good for the limbs
Yeah i thought that too.
Dawn of the dead music
28 Days Later...