well from 1:33 --> 1:34 you can see that they made a cut and calibrated the guardian already, so i guess thats why it just takes a couple of sec to calibrate the thing?
You can clean it with their cleaning kit or take some 1500 grit sand paper and wet sand it until you see just a small amount of the carbon start to come off.
There is no calibrating function for EC on this meter. Bluelab has a 2.77 conductivity solution in which you can test to make sure the probe is dialed in. Regular cleaning and checking the probe once a week is best.
Thank you, I get it yesterday but when I turn it on for test and calibration I saw the PH probe in all condition just show 8.4, noway to can calibration, sending back to the shop
![[LIVE] : ONE ลุมพินี 87 วันนี้!! คู่เอก "ก้องชัย vs โชคปรีชา"](http://i.ytimg.com/vi/YN6e7HVnekw/mqdefault.jpg)
Im curious to see how its calibrated with what "little" is supplied in the box...
well from 1:33 --> 1:34 you can see that they made a cut and calibrated the guardian already, so i guess thats why it just takes a couple of sec to calibrate the thing?
How often does this need to be done?
What does it mean when the light with the questionmark is on
How soft should the tooth brush be ?
a regular soft bristle tooth brush will work just fine
Where do you get that table thing that is holding the bottles?
i search this product tooo !!! this is so amazingly thinkings !!!
@@gannisqc5344 it's 175 and comes with some things
@@Jimbo12716 what the name of the products ??
USD $187 cleaning Station Kit (item: KITCSTNNA
My probe keeps falling on 2.6ec after cleaning, why is that
after how many days we need to calibrate pH and EC probe in hydroponics
Calibrate every 30 days. Lights will flash when it's ready to calibrate again.
@@gsuitter i believe flashing is a sign to calibrate soon then when they go out its time to get'er done.
so simple thank you
there is no button to calibrate the EC probe ... what do i do if the display is incorrect?
Reset it
@@msbernsesp how to reset?
Following
You don’t keep the ppm reader wet?
It doesn't need to be since there's no liquid inside of it to dry out like the pH probe has.
How can I get that plastic holder
It was made only for certified Bluelab dealers
@@infinit11 do u have one for sale ?
@@Carlos-ru4zt Sorry they only give us the one to use
@@infinit11 ok thank you
what happens when your ppm readings feel way off? can the ppm probe be recalibrated? or can you only clean it?
You can clean it with their cleaning kit or take some 1500 grit sand paper and wet sand it until you see just a small amount of the carbon start to come off.
When i press calibrate it flashes 4/10 ph and then once i get 0000 it says ERR
Same here
Same here. Did you ever find the cause or a solution?
I bought this but there is no EC solution kit in the box, should I calibrate EC or it's not necessary
There is no calibrating function for EC on this meter. Bluelab has a 2.77 conductivity solution in which you can test to make sure the probe is dialed in. Regular cleaning and checking the probe once a week is best.
Thank you, I get it yesterday but when I turn it on for test and calibration I saw the PH probe in all condition just show 8.4, noway to can calibration, sending back to the shop
You didn't say how to calibrate the ec meter! Wth??
You can't.
Re r are rerr