M4 Exhaust Installation 2018 Kawasaki Ninja ZX6R 636
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- #m4exhaust #kawasaki #zx6r #installation #diy #sliponexhaust #aftermarket #exhaust #goprohero #That915Guy #bikelife #bikeporn
This is my review of the M4 Exhaust for My ZX-6R Kawasaki Ninja 2018
M4 Slip on exhaust link-
www.ebay.com/i...
I do not own the music clip on this video.It is solely own by Eminemmusic
Lucky You (Feat. Joyner Lucas)
Just bought the same exact bike 0 miles $9k out the door. I'm getting that pipe tomorrow
When u pull the catalytic converter off if you have the rear wheel on the stand just pull it out till it touches the tire and then push the tire up to slide it off just be careful u dont damage it. Also be careful with the fairings. I couldn't find any other videos on the instal so I made this one the best I could. If u have any questions feel free to ask. Oh yeah Subscribe if you want not a requirement though haha!
@@that915guy2 I dont have a rear wheel stand yet lol I drove it from the store to home it's about to rain
pause
DAMN! they selling it here locally at the store for 13k.
I'm about to get the 2018 matte gray zx6r this weekend, its on Blowout Sale in STL for $7399 / $8000 out the door. Why are there so many wires attached to the exhaust? All the bikes I have the only wire is the 02 sensor
Man !! M4 sounds great on this bike as well !!
I have it on my zx14r couldn’t be happier
Sure does
Got the same slip on a couple weeks ago for my 2019 Zx6r, I took the silencer off yesterday and sheeeeeshh🔥🔥
Bro I tried to take it off and it was impossible. Lol at least for me, every tool I tried it with broke so I just gave up
An M4 GP exhaust and a Kawasaki Zx6r what a combination 👌 had it on both my previous two Zx6r 2010 and 2011 amazing sound 🔥 good on you bro
You are so right bro. Love the sound when I first heard it on another video and I decided right there and then, a must own.
one day im gonna own this bike!
I just got the same exact bike! I can’t wait to grab me An m4
Enjoy bro. Awesome sound
Sounds awesome and great job. It looks like needs a servo eliminator once the M4 is fitted.
No. No issues didn't need a servi eliminator
I've said it before and I'll say it again. Its as if the M4 was specifically created for the zx6r. Sure they make them fit other bikes but, they are nearly mandatory on a zx6r. 😷👍🏍💨
Yes sir
Nice I have the same 1,u should take out the baffaler.and also u need a steering damper
I tried to take off the baffaler and it didn't budge
i just grabbed the 2019 i think i want this exhaust
Its amazing. I personally love it and I have a yoshimura on my sv650
YOU DO. 😷👍🏍💨
@@Godric_71 i got it on already its so loud
This video was helpful with pulling the cat. Have you looked into the tst integrated taillight. I put it on mine and it’s beautiful
Actually yes I have the install video on here as well. Thanx for watching I appreciate it!
This being just the m4 slip on, he didnt remove the cat. He just removed the pre-chamber. The cat is located in the link pipe to the headers. He actually could punch the cat out, but It's a huge pain in the ass, and with the increased airflow from removing the cat, a power commander and/or an ecu flash would then be crucial to the longevity of the bike. Wouldn't want that beautiful of a machine runnin to lean(; no pun intended lol
@@888hayd so you means it better without removing the cat?
Davis Santoso I mean if you didn’t want to buy a $300-400 power commander right after punching the cat out, leaving the cat in would be the way to go. Although m4 may not state that an ecu flash is necessary, it’s universally a smart thing to do if you ever change the stock exhaust for anything aftermarket. If you just slipped the m4 on without removing the cat it would probably never cause any issues, but it’d run better with an ecu flash
Thanks bro I just installed the street slayer m4, I didn’t have that extra bracket for the rear sets that you have on the gp style m4, the street slayer is shorter pipe I think. Did you ever get a tune for it or has it been running fine?
No issues with it. Running great
what's the decibels?
Should I go with the GP19 or Street Slayer??
At the end of the day it's what you prefer brother.
Any power gained in low rev's? Also, is there an ECU flash needed? Thx for the video appreciate it man.
No ECU flash needed at least not on this model. Yes the power gain is about 2mph not much difference though
@@that915guy2 thanks for the reply. How about the power in low rev's? This is important for me because i have a license for beginners until next year. Throttle restrictor :( So if i lose power It's not worth it lol
I have a Zx6R from 2016 by the way
I just got them put my 2018 go for test run sounds amazing but. Do you guy smell the burning from your exhaust?
No I didnt
tbh it look better than akra
That's a lot of work just to add a slip on! Are there any slip ons that don't require you to unclip all the plastics??
Not that I know of
I just realized you had to unclamp the side plastics just to take the seat off! LOL That's the most ridiculous shit i've ever seen! I got the 2019 and you just use your key to take the seat off. Even on my other Kawasaki's you only need the key.
Yup
Hey man, just some question, do you really need to removing the cable from the bike? I have 2019 zx6r, and plan to buy a m4 to for the slip on, will it be the same like yours?
Honestly with everyone asking if I got the F1 light on. I wouldn't take any chances and just remove it, because so far I haven't had any issues.
Isee, so just remove the cable right? Thank you for answering anyway man
You can either remove the entire servo and get a servo buddy or leave the oem servo in and plugged in but remove the two cables that attach to the butterfly valve to trick the ecu thinking it’s still connected
does this install trigger any lights on the dash? I wonder why this exhaust is so cheap
On this model bike and how I installed it. Nope it hasn't.
how much did u pay for it and where did u get it from??
www.ebay.com/itm/09-18-Kawasaki-ZX6R-M4-GP-Black-Slip-On-Exhaust-Muffler-KA6922-GP/401241321449?epid=12006617152&hash=item5d6bd8afe9:g:YYIAAOSwJ7RYTdrx
Did you also install power commander? I just picked up a 2019.
Was one of the things I wanted to get as well not yet though. Does it make a big difference from your point of view?
@@that915guy2
I recently learned a valuable lesson about bikes and slip on exhausts. Since they are tuned for the back pressure and the manufacturers tune them lean on gas to improve gas mileage ect.
This slip on could become an issue for you and anyone else especially on a performance bike.
Quick story. I just had a 2016 cb300f. I toss a slip-on (stock is just too quite). Well, it was running so lean that it caused the engine components to over heat and destroy the valve seals, seats, piston ring, piston, and various other small parts.
Due to that i would highly highly recommend either a dyno tune. Or a dynojet power commander to fuel map for the new setup so the bike runs properly and you do not end up with catastrophic engine failure that will costs you thousands to repair.
This is just my piece of advice.
I just got a 2019 zx636 this saturday and i want to get this exact exhaust with a power commander.
The only other thing i would recommend. If you have any warranties. Return the bike to stock before taking it into get checked. Good luck dude
I just got the 2019 zx-6r also I love the bike I have about 3 weeks with it today but I wanted to so a slip on also I'm glad I read this I wouldn't of new better although I'm still in the break in period I have 200 miles more to go before i get it serviced but how did you break your bike in by the way?
@@jzaden10 I'm at around 1300 miles. I drive daily to work. Did the oil and filter change around 900 miles because i was busy. If yours is anything like mine, the manufacturer over torqued the shit outta the oil filter. I had to wrench it off.
Ok, I see well I was told to take it in to get serviced this is my first bike and I am a beginner rider, I was also told to drive under 4000 rpms for the first 600 miles but then I saw a couple videos where they said it's fine to drive between 6 to 8000 rpms and itll be ok which I'm not sure what is ok
i bought the same exhaust but the thing is, it doesnt come with the grease thing i dunno what u call it
Lock tight, it's just so the bolts don't loosen up
Is it the same for 2021?
Honestly I couldn't tell you, but I don't see why it shouldn't be
How much this slip on weight ?
Not sure but I do know it is about 6 pounds less than the stock exhaust
Does the Fl light go on?
No it has not.
If your FI light comes on just get a servo buddy or leave the servo plugged in but remove the two cables leading to the exhaust
Nice vid man, but please stop using those unnecessary, cringy, annoying emojis every 30 seconds, there's just no need, it only detracts from the video, which is great by its own
Thanx for the feedback plus they are annoying to input.lol
@@that915guy2 I got an 03 636 a month ago, looking to install this can soon, the bikes fully stock (16 y/o only 21,000 miles). Shame the import costs from america are as much as $210. I've seen people using the 09 ninja version of the m4 on the 03/04's just needs a little tweaking to get it to fit. The stoke exhaust actually sounds awful, does not do the bike justice whatsoever.
No mapping required?
Everyone has asked me that question and believe it or not no. Maybe I installed it different or something
What did you do about the o2 sensor
I left it as is. As long as you follow the video you'll be good. I've been asked if any lights popped on and the answer is no. So far so good.
@@that915guy2 my question is did the m4 come with a spot to mount the 02 sensor on a bung
@@jontaylove25 no it didn't you just pull out the wire harness when u disconnect it from the exhaust and under the seat the way I did and you will be good. No light should come on
Should I go with the GP19 or Street Slayer??
Sorry I just saw ur comment, the gp is great but it always depends on you.
Should I go with the GP19 or Street Slayer??
I'm more of a gp19 guy but if you like a hidden exhaust then the street slayer is the way to go plus it's a bit louder
Street slayer or gp19 louder?