DIY Powerful Bass Amplifier Using TDA2003 IC | 12V Amplifier
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Hello Guys,
Welcome to my channel.
In this video we are going to make Powerful Bass Amplifier Using TDA2003 IC.
To make this project we need:-
1 - 1x TDA2003
2 - 1x 1000uF 50v
3 - 1x 470uF 50v
4 - 1x 2A104J
5 - 1x 2.2KΩ
6 - 1x Speaker
7 - 1x Heat Sink
8 - Wire
Download Circuit Diagram
drive.google.c...
_ Please Like, Comment And Share This Video
______ And Don't Forget To Subscribe ____
How To Make Powerful Amplifier Using D718 Transistor | #1
• How To Make Powerful A...
How To Make Powerful Amplifier Using TIP3055 Transistor | #2
• How To Make Powerful A...
How to Make Powerful Amplifier Using TDA7297 IC | Powerful Bass | #3
• How to Make Powerful A...
Thank you for Watching.
#Amplifier #TDA2003amplifier #Powerfulamplifier
Excelente 👍
Nice
Спосибо всё работает 🎉
Gammak komlo💝
What is polarity of capacitor connected to pin 2. + which side and _ which side? Please reply.
Go to this link and see the image.
I have marked (+ -) in that image.
drive.google.com/file/d/1a_Rl7gcAS5cJLh19YahL1Trw-HQ_9Zgo/view?usp=share_link
@@VectorXCreation Thank you sir. I got the answer/reply. Thanks for your positive response.
Thanks for this, works really good. Clean and well balanced sound for such a simple circuit. Can I make it a stereo amplifier by connecting grounds ?
👌
How did you get rid of the buzzing noise when this amp isn't connected to any music source
It work but how to fix noise 😢 please rip me
Está com ruído pq ele não fez o aterramento, tem outros vídeos no TH-cam montando amplificador com tda2003, aterramento com 104j, e com resistor 2.2r, 12r e etc
If the output of the audio input device is not clear, there will be noise anyway
Otherwise, when we give the voltage to the amplifier, if the voltage is not stable, the noise will come
Ok
Bro what is the voltage and amps required to run it
12V 0.5 Amp enough for this
Bhai mere pass 1000uf 50v capacitor nahi hain dusra capacitor laga sakte hain kya?
Gg
Pode usar TDA 2030?
Yellow and green is audio input right?
Yes
Speaker berapa watt
Can i use 470 uF 63 volt capacitor
Can i use 1 watt speaker
Did you try? I shouldn’t be a problem
What is the max power of this amplifier?
50W
18w
I made this circuit using tda2030, but only get high pitched beeping from the speaker, I can’t hear anything from the input source. What could be wrong?
Hariyata penne naha ne yata tika