Thank you. For this video. My Daughters Father and I were struggling with the instruction (because they say different on how to Insall the handlebars) but then we searched on how to . And this came up.
To all you who need help with the handle bar, you have to untighten the bar from the top as much as possible and then stick it in, it took us like 15 mins to figure it out. Also, both washers go outside the wheels, the rest is pretty easy.
You can remove the screws and take off the panel on the inside in order to get the handle bars in. I found that I had to unscrew the wedge a lot. So the wedge is completly below the handle bar tube. Put the wedge in first by itself then push the handle bar tube down in.
Since my daughter’s razor did not include the black plastic cap, my wife thought it meant remove the entire plastic interior piece. Smh Also, why is he smiling this is taking me forever.
The light on the wall charger should be green when plugged into scooter and wall. It will show green with just the charger plugged in the wall socket. But when plugging it into the scooter, to charge, it should then be red. When fully charged the light will turn green on the charger, & on the scooter, if it has the green indicator light.
For handle bars you need to remove the black plastic cover from the steering rod, slacken the nut at the top of handle bars and then insert into shaft then tighten up.
No shit! Know how to read. Nothing on you. This is like trying to put a square peg in a round hole. I'm comfortable building things.. reassembled with some assembly is a sinch. Dropping the handlebars is not happening. Wtf
Before I watched the video I was trying to build it and I almost started crying bc I thought I broke it bc everytime I put it in and tightened it it would move around but turns out I wasn’t supposed to have the black thing on the bottem 👩🦲🏃🏽♂️
My nieces have one of these they like it. My youngest niece asked me if I wanted to ride it I said no I’m over the weight limit but they like it though
Start helping out around the house without them having to ask or tell you to. Make sure your grades are good. Then tell them you really wish you could get that for Christmas. It’s a little late for advice now but I hope you get it for Christmas 🎄
Thank you. For this video.
My Daughters Father and I were struggling with the instruction (because they say different on how to Insall the handlebars) but then we searched on how to . And this came up.
To all you who need help with the handle bar, you have to untighten the bar from the top as much as possible and then stick it in, it took us like 15 mins to figure it out. Also, both washers go outside the wheels, the rest is pretty easy.
You’re the king
I wish I would have gone straight to the comments...you just ended 10 minutes of aggravation for me, thanks a million
Do the tires come pumped up?
Thank you so much
What is the total weight of the bike?
Can a 5-year-old child ride this bike?
Took me about an hour, those handlebars sliding in were difficult, felt like trying to plug in an outlet in the dark but did eventually slide in easy.
Uh, you glossed over the impossible handle bar assembly.
I still cant get mine in how did you get yours
Does not slip in that easy nor did mine come with tools or anything
@@Devildog3106 the tools are in the seat.
@@faelily2366 it isn’t
you have to loosen the Allen screw alot to get it to pop in correctly took us forever too
I had no idea it was so easy! Thanks this helped a lot.
You can remove the screws and take off the panel on the inside in order to get the handle bars in. I found that I had to unscrew the wedge a lot. So the wedge is completly below the handle bar tube. Put the wedge in first by itself then push the handle bar tube down in.
Since my daughter’s razor did not include the black plastic cap, my wife thought it meant remove the entire plastic interior piece. Smh
Also, why is he smiling this is taking me forever.
so she broke it by accident?
If only I knew the secret to happiness that the guy in this video found
Ahahaha
💯🤣
How do you know that the razormoped is full battery??
The light on the wall charger should be green when plugged into scooter and wall. It will show green with just the charger plugged in the wall socket. But when plugging it into the scooter, to charge, it should then be red. When fully charged the light will turn green on the charger, & on the scooter, if it has the green indicator light.
Is it Just me or do these handle bars SUCK attaching?????
I just put it on my Christmas list! My mom said maybe so I’ll most likely get it
For handle bars you need to remove the black plastic cover from the steering rod, slacken the nut at the top of handle bars and then insert into shaft then tighten up.
No shit! Know how to read. Nothing on you. This is like trying to put a square peg in a round hole. I'm comfortable building things.. reassembled with some assembly is a sinch. Dropping the handlebars is not happening. Wtf
Don't forget to Xacto Knife off some of the packaging but don't snip the ones below holding the wires except the zip tie excess
I just got one!!! and it's in black!! WOOT here come urban sketching!!!
Why do you always smile? It’s funny
Thanks alot, perfect job, thanks to you Dean l put the washers in their holes. ..keep smilin bro!
Before I watched the video I was trying to build it and I almost started crying bc I thought I broke it bc everytime I put it in and tightened it it would move around but turns out I wasn’t supposed to have the black thing on the bottem 👩🦲🏃🏽♂️
Bless your heart..l was also paranoid that l was supposed to use the black thing. It rides wonderful now, blessings
don’t see manual and can’t open seat. HELP
Mine as well have you been able to resolve this yet?
Were you able to get the seat open? You'll need to pull from the side closest to the rear wheel.
Thank you very much. It was helpful
How do you open the seat?
Lift up on the back of the seat by the metal bar in back, pull up hard! There’s no true lock just a strong latch!
Mine won’t slip in at all like that. Also mine didn’t come with tools
Tools are on the seat
thank you! as a 10 year old biulding this it was pretty easy
Great job!
Trying to connect these handlebars is enough to make me return this !!!!
How do you open and close the seat 💺
Pull up from the back of the seat-- sometimes the latch is a little too secure, so you may need to pull firmly.
Wtf is up with the handle bars not going in. Been loosing it up and fighting up non stop. Already a pain in the ass
same whit me , 3 hours try taki in and out but it not get in or it just hal way in
lmao i asked for a dirt bike and my dad pulled up in the same bike as that 😂😂😂
🤣🤣🤣
What is mine arrived without a charger??
Yeah the handlebars do NOT slip in there like that. "15 minutes"... We're now at an hour and still no handlebars.
Hi-- were you able to get them secured? If not, let us know!
I don’t know how to get rid of the kickstand
15 minutes to a professional mechanic
My nieces have one of these they like it. My youngest niece asked me if I wanted to ride it I said no I’m over the weight limit but they like it though
Are the handle bars ujustable
How do you know if it’s charged?
The charger light will turn green when the product is charged.
Kinda wanna smack that smile off ur face! 15 minutes my butt. It’s been 2 hours. Handlebars STILL not in. And yes, I took the black cap off
IKR!!!!
I said they same thing...
Did you get it?
Yes finally. But only because I found another TH-cam video. Some shirtless surfer guy explained it sooooo much better
@@kimbask5714 lol i found him up
Where did you get from
An hour and no handlebar assembly. I just dont get it. Help im ready to cry and feel dumb as hell
I need to think of a way to charge 12v batteries.
How do you turn the headlight on
There isn't a front light it's fake .well atleast on mine there isn't
It’s decor lol.
@@AgCharmsStudios lol yep. I ordered a real lamp
I was wrong my nieces pocket mod is blue not pink
Charging 24v battery. Two 12v batteries. In series
It took me 15 minutes only cuz the front wheel was turned backwards. I turned it around and it went in. 😂
Had to wear rubber gloves and put my superman cape on to rip off the plastic tip
Do y’all know how to convince your parents to get this for you (plz tell me) 💀
Start helping out around the house without them having to ask or tell you to. Make sure your grades are good. Then tell them you really wish you could get that for Christmas. It’s a little late for advice now but I hope you get it for Christmas 🎄
Well I will have to lose weight first I’m over the limit but my niece has one and they enjoy it
Took me almost an hour to realize the “black plastic cap” was inside the hole where I’m trying to “gently” insert handlebars…..🤬 do better Razor.
Video doesn't help much but comment section to the rescue
First
😁🤗😍
This is very helpful except for the fact that my daughters brand new scooter came WITH NO CHARGER so thats awesome
@carmellacorbaci165 i thought mines didn't come with a charger but we looked under the seat and found it.
How do you open the seat up??
Pull the seat up from the back, closer to the rear wheel. You may need to pull firmly.
Hello i wanna kwn if the tires need to have air
They have to have 40 psi