I love every one of these and appreciate you taking the time to show us close up pictures too as it can be difficult to see them properly when they're moving. Absolutely gorgeous xx
Anyway, I admire you work, it's so beautiful and I finally found what I talents Into, if I count correctly I have 14 resin finished just like one of yours
I absolutely LOVE your work! I tried to make a galaxy pendant, and 2 things happened...1, the alcohol ink just sat on top of the resin, and 2, the resin never cured! I followed your steps, but obviously something went wrong. Do you have any ideas? Thanks.
It could be the ratio of resin that makes it not cure. The one I use is a 1:1 resin by amount rather then weight, but then there's 2:1 or 3:1 resins. Or if you used UV resin it won't cure unless you either put it in direct sunlight or us a UV light! It could also be the amount of ink used. I know it you add too much paint in resin it doesn't like to cure so it could be the same with the ink! And to it not sinking it might be the white ink. Some white inks aren't heavy enough and don't sink causing the pretty color fall! I hope this helps!
This is resin and alcohol ink, using silicone molds. The molds are inexpensive but the ink and resin can be pricey. You'll need a respirator and gloves when you work with resin (they don't do that in this video but trust me, the fumes are strong even when you can't smell them. It can do permanent damage. A ventilated room is sometimes enough for some resins.). I don't recommend the plastic cup but instead getting silicone cups. Resin cures by heating up after the two parts have been mixed and if you don't work fast and have some leftover in the cup it will begin to smoke and melt the cup which just makes a mess. You'll honestly want a heat gun to remove bubbles too.
I know Sophie and Toffee sells mini hand drills, both ones that you twist like in the vid or semi automatic ones with a spring, for a pretty good price! And after drilling you can put an eye screw in though if you're using circle caps you don't need to drill it just attach with a strong adhesive or even resin. Hope this helps!
Hey ! I hv advice for you! Instead of leaving the epoxy resin to dry for 48 hours, u could use a UV flashlight and in just a few mins it will be hardened !
Bellas combinaciones de color!!!. Después del vaciado de la resina a los moldes, cuanto tiempo debe pasar para iniciar la aplicación de tintas?. Saludos desde Chile.
I wonder why the white seems to drop to the bottom so much faster than the other colors. It almost seems as though it it needed to help move them down to the base of the mold. I gotta get that egg shaped mold...I have the gem one.
im following step by step but the result is not near it. all the colors just mix up and gets ugly.i dont get the "drop" effect and it is not transparent at all.all the color is mixed up to the resin. any ideas what is the problem? (48 hours resin and the same brand inks and molds)
Nikoskk9 your resin is more than likely too warm. Room temp too high. So the resin is not viscous enough. The warmer the resin the more it flows and mixes.
Very good! I have these molds but will have to try it with my UV resin. I am not able to do two part in the house and it's not 70 degrees till spring. Update, the ink didn't drop in my UV resin but just laid in a clump at the top.
@@Bianca-dm3ir Amazon and Ebay. If you find them on Amazon they come in quicker, Ebay will probably be cheaper but you'll have to wait for the slow boat from China!
I really like the results you got from the first set when you used less colors that matched better. I think you might get some better results using some higher quality inks. And you probably need to use a few more drops of white to help the color sink. This is just from what I've seen and what I've heard from talking to people.
First of all, I hope you had a wonderful Christmas! 🎄 You know I love your channel, so I need your expertise...I tried to do this with the egg mold. My shirts alcohol ink ended up going all the w a y to the bottom and leaving big white blotches on the other end of the egg. I used 'A' white and 'C' white, both of them did this. Am I using too much white? And instead of the white taking the color down too, the colors stayed around the top and middle. It's like the white just took over. Can you help? I am using humiliate resin, 1 to 1 ratio. Would really appreciate your assistance with this, if you have time. Thank you, Pam 😬
You need to leave the resin to thicken a little for 40 - 50 minutes and then the dye will not be able to reach the bottom. Try adding paint after 30, 40 or 50 minutes.
I like your video and how your making different kinds of jewellery💎💍📿 is amazing thank you for sharing I appreciate it 😊 I hope you have a great day⛅🦄🌈🦋🐚💐🌸🍀 t c and God bless 🌥🙏👼 from me here in Ontario 🇨🇦🙋♀️☯️☮
I have 24 hour resin. tried making the jewelry using this technique. Instead got all the paint sunk at the bottom and a huge mess. Resin became all soft and jelly like.
The alcohol ink prevents the resin to dry, it never hardens! And i have the same chinese brand. My resin is 12 hrs. If i put more than 2 drops is a sticky nightmare 🤷♀️🤷♀️🤷♀️ help pls xD
Thank you 😊 for sharing your experiments with the different types of epoxy resin and the alcohol inks. It's great to know a see how they all work 😀!
I love every one of these and appreciate you taking the time to show us close up pictures too as it can be difficult to see them properly when they're moving. Absolutely gorgeous xx
theses are very gorgeous, i would put these on my key chain if i could
Cada video encuentro que es maravilloso lo que hace....felicitaciones por tan lindo arte...me encanta
It’s like looking at a miniature alien world or the sea floor of a strange ocean! Love these things!!!😍
Оагокггпоррроокгкшо
I love every piece!!! Very nice work!!!
Its sooo beautiful 😲😍💖
I ADORE your work! Thanks for this video, it's incredibly helpful to see the effects in different curing times. Very very beautiful! ♡
صلوا على النبي لعلها تدخلنا الجنة
اللهم اشفي مرضانا و مرضى المسلمين
و ارحم موتانا و موتى المسلمين❤️
Amazing! Very beautiful and cool decorations!👍👍👍👍😍😍😍😍😍😍😍😍😍💖
I definitely like more the first 2 resins. The results are beautiful
It is so pretty!!!!!!
Anyway, I admire you work, it's so beautiful and I finally found what I talents Into, if I count correctly I have 14 resin finished just like one of yours
This comment is under rated.
Thank you so much! This was very clear.
This is so BoOtAfUlL
Мне так нравится форма яйца, красиво получается
Оное кр6аппurh
Thank u so much for sharing this video
I would LOVE to know the brand of resin you used for your second grouping. It's so clear!
Me too.
Me too 🤗
Thank you! This was very helpful info to know.
These are amazing
The first one that looks
like a egg I saw a planet!! OoO ~me being crazy~ ITS SO COOLLLLLLLLL
I was looking in the comments to see if anyone else saw it too
Wonderful 😭😭🤩🤩🤩🥰🥰🥰😘😘😘😘
очень крутые штучки
They are amazing.
Very nice juelary ideas💖💗💘
Beautiful
que lindo!!!!!!!!!!!! quero fazer tambem.
Pretty!!!
Beautiful handmade jewelry !
Beautiful! I'm new to this & I'm wondering what are the differences between regular colors & alcohol ink?
I absolutely LOVE your work! I tried to make a galaxy pendant, and 2 things happened...1, the alcohol ink just sat on top of the resin, and 2, the resin never cured! I followed your steps, but obviously something went wrong. Do you have any ideas? Thanks.
It could be the ratio of resin that makes it not cure. The one I use is a 1:1 resin by amount rather then weight, but then there's 2:1 or 3:1 resins. Or if you used UV resin it won't cure unless you either put it in direct sunlight or us a UV light! It could also be the amount of ink used. I know it you add too much paint in resin it doesn't like to cure so it could be the same with the ink! And to it not sinking it might be the white ink. Some white inks aren't heavy enough and don't sink causing the pretty color fall! I hope this helps!
Лвоопое6оклроое
Where can I find the item where do they sell it at I want to try and do it... it's looks so iconic and unique
This is resin and alcohol ink, using silicone molds. The molds are inexpensive but the ink and resin can be pricey. You'll need a respirator and gloves when you work with resin (they don't do that in this video but trust me, the fumes are strong even when you can't smell them. It can do permanent damage. A ventilated room is sometimes enough for some resins.). I don't recommend the plastic cup but instead getting silicone cups. Resin cures by heating up after the two parts have been mixed and if you don't work fast and have some leftover in the cup it will begin to smoke and melt the cup which just makes a mess.
You'll honestly want a heat gun to remove bubbles too.
Gill I bet she wore a mask.
For the items she does Amazon has the molds
I'm proud of her :)
Love every place
where can i purchase the mini driller from? and what happens after drilling the hole- adding an eye pin down or just a circle cap?
I know Sophie and Toffee sells mini hand drills, both ones that you twist like in the vid or semi automatic ones with a spring, for a pretty good price! And after drilling you can put an eye screw in though if you're using circle caps you don't need to drill it just attach with a strong adhesive or even resin. Hope this helps!
Amazon sells them also.
Hey ! I hv advice for you! Instead of leaving the epoxy resin to dry for 48 hours, u could use a UV flashlight and in just a few mins it will be hardened !
Can i mix water in paint and use it please reply as soon as possible
beautiful results!!
Wow pretty
Bellas combinaciones de color!!!. Después del vaciado de la resina a los moldes, cuanto tiempo debe pasar para iniciar la aplicación de tintas?. Saludos desde Chile.
Yo los incorporo inmediatamente
Your resin finished product is so crystal clear and clean, what brand resin did you use as mine is always bubbly...your advise pls
Красота, я только начала заниматься смолой и не совсем пойму это спиртовые чернила или обычные?
Maybe I should do some compilation of you accidentally drop the finish resin on floor, it might be fun :')
Aap ye sab banane ke liye kya use karte plz bata dijiye
Whats in the white bottle that you keep using? I want to get started with this kind of stuff and really like the effects of that product😁💖
I don't know if you've found the answer to this or not yet but she's using white alcohol ink...
Donna R Yes, I realized that after a while of watching similar videos. 😂 Thank you.
Je fais la même chose que toi. Bravo tes pièces sont magnifiques ;)
Bonsoir savez vois quoi comme encre elle utilise pour faire ses super éclat de couleurs
@@marylinstehlin2645 oui mais il faut lui demander si elle veut donner son secret ;)
😦😦😦😦😦😦😦😦😦😦😦 OMG It's amazing
Can i use paint instead of ink?? please reply as soon as possible
Where can I purchase the little colored balls where you placed at the base of your sphere please pray tell...thx
Can this method be used in polyester resin (dried around 3 hours)??
Does polyester resin dry clear?
@@Gilliebeany yes
Гтштргшт
It's beautiful😍. How do you do this? It's wonderful💛💛
Do you let the resin thicken a little before adding the ink? When I try this the ink just pools at the bottom of my mold.
I'd like to know that as well
Kindly advice. Which resin is better?
I wonder why the white seems to drop to the bottom so much faster than the other colors. It almost seems as though it it needed to help move them down to the base of the mold. I gotta get that egg shaped mold...I have the gem one.
as cores são lindas
Quem é brasileiro e gosta deses videos dela deixa o like ✌
Can you plz kindly tell me what ink do you use and where do you get it?
Great video but how do you mount the pyramid pendants you only showed the egg pendant been mounted cheers.
im following step by step but the result is not near it. all the colors
just mix up and gets ugly.i dont get the "drop" effect and it is not transparent at all.all the color is mixed up to the resin. any ideas what is the problem? (48 hours
resin and the same brand inks and molds)
Nikoskk9 your resin is more than likely too warm. Room temp too high. So the resin is not viscous enough. The warmer the resin the more it flows and mixes.
@@ryaldeveau207 suggested temperature?
Maybe the result is better if you wait 10 - 20 minutes before dropping the alcohol ink into the resin? 🤗
This was a suggestion from another artist
@@ulrikeklein406 I will try this out, thanks !
This is used for epoxy resin pls reply and pigment which type any brand name for pigment pls reply bro
love
Amazing
What kind of resin is used and what kind of colors?
Beautiful
Curious as to what type pigments u are using in the balls and diamond molds..
@Miah Miah Segura, those are alcohol inks.
😍😍😍😍
Wow😙
Very good! I have these molds but will have to try it with my UV resin. I am not able to do two part in the house and it's not 70 degrees till spring.
Update, the ink didn't drop in my UV resin but just laid in a clump at the top.
Can you please tell me where you bought the molds? 😊
@@Bianca-dm3ir Amazon and Ebay. If you find them on Amazon they come in quicker, Ebay will probably be cheaper but you'll have to wait for the slow boat from China!
Virginia Bradley haven’t been able to find them... can you provide me a link? rosieswins@gmail.com
I also test with UV resin, but very bad idea, normal resin is bester, but you shoud be know when we can spill ink
Aquí en guadalajara Jalisco donde puedo comprar los moldes y la resina me puedes indicar por favor gracias
Nice song
plz share the link where will I buy the require materialss.
Michaels or amazon sells pretty much everything! So does Sophie and Toffee, but then again they're great for getting into resin!
I really like the results you got from the first set when you used less colors that matched better. I think you might get some better results using some higher quality inks. And you probably need to use a few more drops of white to help the color sink. This is just from what I've seen and what I've heard from talking to people.
Гвррй6гкщш64щощкмалклзлвззлкщьудьазддйзжсзщлукщщощлзщулзхщцушу2льв8плц8ищещщклдпщузбсщлнщпллпщмлдщуошащтшкзыщщвышыфщдщвыгуцщщщщщщшцлвшчш
És mui belo
First of all, I hope you had a wonderful Christmas! 🎄 You know I love your channel, so I need your expertise...I tried to do this with the egg mold. My shirts alcohol ink ended up going all the w a y to the bottom and leaving big white blotches on the other end of the egg. I used 'A' white and 'C' white, both of them did this. Am I using too much white? And instead of the white taking the color down too, the colors stayed around the top and middle. It's like the white just took over. Can you help? I am using humiliate resin, 1 to 1 ratio. Would really appreciate your assistance with this, if you have time. Thank you, Pam 😬
You need to leave the resin to thicken a little for 40 - 50 minutes and then the dye will not be able to reach the bottom. Try adding paint after 30, 40 or 50 minutes.
Can anyone please tell what music is playing at the beginning of the video?
Could anyone tell me where i could get the molds and the stuff to make the thingd
aliexpress))
What are them little bottles of color youre using? Looks like food coloring. 👀
Alcohol inks
😍👍❤💎
I like your video and how your making different kinds of jewellery💎💍📿 is amazing thank you for sharing I appreciate it 😊 I hope you have a great day⛅🦄🌈🦋🐚💐🌸🍀 t c and God bless 🌥🙏👼 from me here in Ontario 🇨🇦🙋♀️☯️☮
А где вы покупаете эпоксидку?
Зачаровывает😍
Я скучаю по твоему голосу)
А где можно взять такое тоненькое ручное сверло, или как эта штука называется?
на али все есть.
What is the background music dr
I have 24 hour resin. tried making the jewelry using this technique. Instead got all the paint sunk at the bottom and a huge mess. Resin became all soft and jelly like.
Sorry but were did you buy your ink please ?
И познал охламон, что сие есть круть несусветная 😲
Шощвща щаок6тщтр
Where can I buy the best resin 🤔
You can buy it off amazon or in a Michaels! The brand I buy is actually cheaper at Michaels then from the actual producer and I don't know why.
А что у Вас в белом пузырьке?
STUNNING THQ XXXXX DEBBIE NOT DAVID XXXX
8:22 как будто цветок распустился
Also the liquid color bottles. What kind of paint is it to get the galaxy effect on each of your finished items?
I think its alcohol ink like in the link Epoxy Resin Pigment Liquid Colorant Dye Ink Diffusion
So gorgeous!!
Can you please tell me the names of the songs??
The alcohol ink prevents the resin to dry, it never hardens! And i have the same chinese brand. My resin is 12 hrs. If i put more than 2 drops is a sticky nightmare 🤷♀️🤷♀️🤷♀️ help pls xD
Mariana Sánchez have u tried leaving it longer? Or maybe putting a thin layer on top so it won’t b sticky anymore?
Maybe try food coloring?
Love video , BUT please use calmer music . It detracts from the subject
What the name of the coluor you ues??
Bonsoir s est quoi comme encre que vous utiliser svp
Alcohol ink
Il y a de la bonne wualite sure amazon vous tappez alcoholink pinata
Someone pls tell me what the first song is
Quais sao os componentes
Alguém do Brasil?;-;
Eu
Eu !!! ^^
What is song vídeo 3:38
Name which color you use
None of the links are working.