thought i knew all there was to filter socks but this video proved me wrong :) i always put carbon in a bag then drop it in my filter socks. never thought that it could grind it up into little pieces. thanks for the tips great vid!
I run 100 micron socks. I change them out on Sunday and Wednesday, when I do my water changes. I have something like 24 of these socks. I keep a 5-gal bucket with water and bleach. My sump uses 3 socks, so I am swapping out 6 filter socks every week. When I can't put any more socks in the bucket I run it through the washer a couple times. When done, I run the washer one more time with hot water and bleach to be sure the washer is clean. I let the clean socks air dry. I try to buy new socks at least once a year.
Before spending on another dollar on corals or livestock, if you have a sump, switch to a fleece roller! Game changer. And I understand that many can’t redo their plumbing, so there’s other option such as the Klir fleece roller which I use that go straight into the filter sock chamber. It has totally helped me bring my nutrients down.
Since us Red Sea owners are stuck paying for double priced socks, it would be great if they (or maybe an awesome MN based reefing gear company....not to name names) could make a less expensive alternative.....and if they do, plugs as well as 4 inch length socks would be awesome.......Just a thought.
I’ve been sticking the hose for my sand vacuuming in my filter sock for over 10 years. I have an auto water changing system so I don’t do water changes while I vacuum the sand and realized a long time ago I needed a way to do this while leaving everything running, it’s the last step in my weekly maintenance is to remove the filter sock after this and start with a fresh one
#8 I use a mesh sock to collect algae now and then. Put a mesh sock in the sump and run a syphon hose from tank into the sock. Just keep the main pump going and you can pinch off algae to your hearts content.
I love the concept and I understand the decomposition of organic macromolecules. But honestly, I'm too lazy to use them properly. They work amazingly well, but as you point out: only if used right.
Also remember that just like felt, mesh socks come in varying microns. I have a 50 micron mesh that is like Gandalf. Nothing passes i have to clean it every 2 days. Think i need to go up some microns.
Use polyfiber in the media cups, not rolled up filter matts. Really inexpensive and a pair of salad tongs to grab out the old & place the new. Very fast, cheap & easy.
I rather like the mesh socks, while I agree they don't pick up as much stuff as the felt sock, they are super easy to clean out. Throw them into the wash? HA! Just run them under a faucet for a minute and they'll be dry by the end of the day.
Filter socks were great until I lost my desire to clean them every 48 hours. Been using fleece roller filters for 6 years now and never looked back. The Thieling Rollermat never failed once. I have replaced it with the Clarisea 5000 but I'm not sure if I will not get a new motor and pinion and go back to the Thieling. 4-6 weeks per roll for Clarisea versus 3-6 months on the Thieling roll. Drawbacks? The Thieling is big and bulky and is difficult to clean without an overnight acidic soaking. Advantages? Twice the filter surface area, easy to load a new roll without using the old roll as a leader, and a safety dump that it directed, not just an overflow. But the Clarisea is so easy to plumb. One straight pipe down with a piece of flex for the 3cm offset. The Thieling needs several elbows and turns. The Clarisea makes less gurgling noises. Both filter the water with extraordinary effectiveness.
I used to run them all the time but now I only use them when servicing my tanks. I was having nutrient issues with them. I even toned down on the skimmer usage, running only 20 hours a day. Filter sock and skimming is too hard on the bacterial balance in our tanks.
I've got an over-sized skimmer so I use the mesh filter socks. What they don't get, the skimmer gets, and what the skimmer doesn't get, the fuge gets. Seems to work out pretty well for me.
I just had mine overflow this morning thank God it was a slow spill wasn't as bad as it could have been. But it was my fault I had the overflow opened too much so the pressure was too high causing spillage on the side from the clogged filter sock. Wouldn't have been an issue of I had my overflow pipe set to a slower flow and my return pump not on max power
#8 I am hurt I love my mesh filter socks, they are so easy to clean, my wife will not let me use the washing machine anymore, so I clean mine every time they start to overflow. My sump is so much cleaner now.
I own a cleaning service. And cleaning socks is very easy IMO. I just put them under water in my sink or tub. And use my hand to get everything out then rinse in RO and toss em back in. I have 5 socks and wash about 2 a week or 3 days. Works for me and maybe not everyone. I wash them in bleach bi-monthly
Cheers guys. Man, where can I buy them for $3 bucks each? 😜 I also made the mistake when I built my custom acrylic sump to make the recessed sock holes for the 4” Vertex filter socks (same size as Red Sea’s ). Not realizing they’re slightly smaller then BRS brand and all other 4” filter socks on the market.
I love my 100 micron mesh socks... Filter well enough to clog 3 of them within 4 -5 days, so I change them every 3-4... Washing them is a breeze... Can never go back to felt
I'm all about the mesh socks. I have 3 on my sump, and I just pull one per day on a rotation and rinse it out under the sink. Takes like 2 minutes. Sure, it doesn't filter as well as felt, but I'm also much more likely to keep them clean on schedule since they're so much easier.
Can you try retesting mixing IO salt. Since I aerating the water while l bringing up temperature. Two hours later I add salt. Even after 24 hours mixing with maxi jet. I have no brown build up in white bucket.
I wasn’t a fan of the waterbox filter socks. Not sure if they’re available in Australia, but there’s some components made for modifying waterbox aquariums. I replaced the filter sock on my with a Intank media basket, then just use several layers of sponge filter. The media basket did cost more than the filter socks. But should only be that one time cost instead of buying replacement socks. The media basket that I got did require cutting out the supports out of the tank that held the filter sock plate.
I rotate the socks with the dirty socks soaked in bleached for 2 days and then rinse with a dechlorinator sodium thiosulfate used for freshwater chlorine removal.
@@jamesparrott2073 not at all just pop mesh one out, so easy to clean as they don't retain muck like felt. I'd much prefer to add a bit of filter floss in the mesh sock than use felt socks.
I just moved back to socks and I just pick up 3 every time I go to a store or buy online... I'll keep that up till I have enough or start replacing the oldest
I created some kind of table-like insert for the Media Cups that can be 3D printed (Thingiverse look for Red Sea Media Cup) So I do not have to use loads of floss when a little bit goes a loooong way.
Not a direct comparison, but we did investigate how often changing out filter socks would affect filtration in this video. th-cam.com/video/LOJ6B-0p9c0/w-d-xo.html Since the filter rollers of the world do this automatically, I would guess that it is as effective as changing socks daily.
I'm sure that I'm missing something, but wouldn't a filter sock holder situated above the waterline pretty much fix any problems with its use? Meaning suspending the sock outside of the water, but situated so the return water still runs through them. This way, the rotting matter inside of the sock wouldn't get back into the sump and fuel nitratesamd phosphates. Just my thoughts..
I change mine every 4 days- the problem is taking the old ones out and having to wash them right away because if you don’t they stink. They when you do wash them and let them dry out they still stink!!
Yeah, I'm a number 3 kinda guy.. I don't have a 2nd washing machine. although i have a buddy who bought a cheap machine JUST for his tank. He saves more money than i do. It is kinda wasteful.. I think i buy 10 at a time from you guys. The only Damn thing IN this Hobby that's cheap.
The mesh sock could be good for large predator tanks. As for the rollers...seems prohibitively expensive. What's the average per-month cost of replacing the mats?
Cost per month will depend on the brand of auto filter roller you have and amount of debris it's removing from the water. That said, most rolls will last somewhere in the 4-6 week range, so you should expect to spend somewhere in the ballpark of $20 a month on fleece rolls.
Number 21 making the mistake that filter socks and sumps are for salt water tanks, they also apply to Fresh water as well, and make maintenance a breeze :) Number 22, don't ditch the mesh, see comment below, mesh is great Number 7.5 / 8.5, addition to the skimmer and mesh touch point you noted getting a 200 micron filter when you only need a 75 micron to catch big chunks and let the skimmer do its job, or if you have multi stages in your sump for filter socks pre filtering in chamber1 with a 75 and chamber 2 with the 200 micron, the latter not that common to find any more but worked great and less buildup occurs in chamber 2
I’ve been following you guys for years. I don’t actually keep Marine anymore alongside my salt Warsop I always used to keep Discus. And now my passion is with them. But there’s still loads of useful stuff you guys come up with that are use daily I just wish there were suppliers and channels out there as dedicated as you guys are. If you ever fancy doing a sideline in high-end freshwater give me a shout I’d love to get involved
The challenge there is that the mesh might get clogged pretty easily. If you're going to use biological media, I would suggest placing in a high flow area of your sump.
Does it matter if my filter socks fold at the bottom I need a 7in by 10 in filter socks but I can only find 7 by 16 can I fold it at the bottom and be okay or will it give me complications?
Mesh media bags are pretty popular in the hobby. While they're not as effective as reactors where water is forced through the media, they still get the job done in most cases 🙂
Any idea why my skimmer goes crazy when i change my filter socks? I was them by hand 4 gallons of water to 1/4 bleach rinse and rinse then sit out to dry for least 2-3 weeks. Any idea?
Usually that happens when there is some sort of residue on the socks. Try rinsing them out with some RODI water before you put them in the sump next time to see if that helps.
Filter socks are a pain, but roller mats add cost and complexity. Someone please design a manual roll. I could be very diligent and manually crank a roll to expose a fresh section of the mat twice a week. It's a really simple solution. Someone point me in the right direction if this is already a real product
I wld think it wld clog pretty quick(being a flat ... thin?... surface and wld need to be turned a lot more than 2x's a week(perhaps even twice a day?) using a manual roller, hence the reason it's automatic! True? False?
That would be a little bit of a DIY project. We do sell larger 20" canisters that you could plumb in with your return with the proper fittings. www.bulkreefsupply.com/reverse-osmosis-canisters.html
I have a drain pipe on bottom corner of my tank designed for water changes but sometimes hook up a sediment filter and let it run into the sump for a couple hours. (Can't have it constant in case of a power cut). Can also hook up a cheap small return pump onto the sediment canister for 'gravel/sand' cleaning running the water back into the sump/tank too.
Love the felt socks for blowing off the rock. Crank up the powerheads and hold the sock over a powerhead and collect a lot of the stuff out of the water.
I'm watching this video, realize I need spare filter socks and not the mesh ones that came with my red sea tank, pause the video go buy them from amazon. Keep watching the video, realize that red sea filter socks are proprietary and 4in socks wont fit right... I cancelled the order, but damnet...
If you can avoid these mistakes 🙂 Sometimes reefers need to be honest with themselves and know which maintenance items they're actually going to maintain. If you go into it knowing that you're not going to use the filter properly, it's best to pick another tool (like an automatic rollermat) to get the job done instead.
Never understood filter socks especially since filter floss pads predate it, & solve that HUGE problem you had with the holes for socks in the sump lol just cut out a nice big rectangle & done PLUS yall nasty for putting that decomposing thing in your washer, seems about white
Why would anyone buy a pre-made sump? They are the biggest scam in this hobby IMO. Just make your own, it's incredibly easy and you can make one for under $50 easily depending on the size
I make my own for 31 cents all in. 4 inch. sewing machine was used for 65 bucks and it is not that hard it is relaxing really.
Ryan they are $6 Not $3 unless you want to lower the price :)
mine are 10$ at least the ones i buy from waterbox for my mini 15..
😂😂😂
Ever since I saw this review I took the advice and changed them 3 to 4 days all the time.
thought i knew all there was to filter socks but this video proved me wrong :) i always put carbon in a bag then drop it in my filter socks. never thought that it could grind it up into little pieces. thanks for the tips great vid!
Someone else can correct me if I am wrong, but as long as it is tightly secured in the bag, it won't tumble, so you are good to go!
I run 100 micron socks. I change them out on Sunday and Wednesday, when I do my water changes. I have something like 24 of these socks. I keep a 5-gal bucket with water and bleach. My sump uses 3 socks, so I am swapping out 6 filter socks every week. When I can't put any more socks in the bucket I run it through the washer a couple times. When done, I run the washer one more time with hot water and bleach to be sure the washer is clean. I let the clean socks air dry. I try to buy new socks at least once a year.
i need a shrimp on my filter socks now
Before spending on another dollar on corals or livestock, if you have a sump, switch to a fleece roller! Game changer. And I understand that many can’t redo their plumbing, so there’s other option such as the Klir fleece roller which I use that go straight into the filter sock chamber. It has totally helped me bring my nutrients down.
Since us Red Sea owners are stuck paying for double priced socks, it would be great if they (or maybe an awesome MN based reefing gear company....not to name names) could make a less expensive alternative.....and if they do, plugs as well as 4 inch length socks would be awesome.......Just a thought.
I use a red sea filter cup and change the filter flos, tennis ball size. Every other day. Cheap and works great!
I think the mesh filter socks work well when paired with the skimmer to get the smaller particulates.
I sure appreciate these videos. Major reason I continue to supports you.
I’ve been sticking the hose for my sand vacuuming in my filter sock for over 10 years. I have an auto water changing system so I don’t do water changes while I vacuum the sand and realized a long time ago I needed a way to do this while leaving everything running, it’s the last step in my weekly maintenance is to remove the filter sock after this and start with a fresh one
#8 I use a mesh sock to collect algae now and then. Put a mesh sock in the sump and run a syphon hose from tank into the sock. Just keep the main pump going and you can pinch off algae to your hearts content.
I am using just one 100 micron 7 inch sock for my 180 tank and a 3 day replacement cycle.
You should do a video on how you added that filter roll in a Red Sea sump!
Definitely
Very informative. I really enjoyed this
My Red Sea came with a mesh sock. That's what I use. Works well.
I love the concept and I understand the decomposition of organic macromolecules.
But honestly, I'm too lazy to use them properly.
They work amazingly well, but as you point out: only if used right.
price difference in the sump with socks and sump with roller matt is double or more just look at Triger system sumps...
Also remember that just like felt, mesh socks come in varying microns. I have a 50 micron mesh that is like Gandalf. Nothing passes i have to clean it every 2 days. Think i need to go up some microns.
I tried 200 and didn't feel it did enough, so I use 100 now. Make it 4-5 days before they fill up, so that may be the Goldilocks size.
@@MrHyde14537 50 clogs really fast
@@StNovaSt I have a few.. They clog real fast.. Use them only for specific reasons, like when I am cleaning my sump, etc...
Use polyfiber in the media cups, not rolled up filter matts. Really inexpensive and a pair of salad tongs to grab out the old & place the new. Very fast, cheap & easy.
thanks! I use sharkbag on my planted aquarium!
I use 5 micron felt filter meant for Diesel engines. Using them for about 5+ years now, no issues.
I rather like the mesh socks, while I agree they don't pick up as much stuff as the felt sock, they are super easy to clean out. Throw them into the wash? HA! Just run them under a faucet for a minute and they'll be dry by the end of the day.
Filter socks were great until I lost my desire to clean them every 48 hours. Been using fleece roller filters for 6 years now and never looked back. The Thieling Rollermat never failed once. I have replaced it with the Clarisea 5000 but I'm not sure if I will not get a new motor and pinion and go back to the Thieling. 4-6 weeks per roll for Clarisea versus 3-6 months on the Thieling roll. Drawbacks? The Thieling is big and bulky and is difficult to clean without an overnight acidic soaking. Advantages? Twice the filter surface area, easy to load a new roll without using the old roll as a leader, and a safety dump that it directed, not just an overflow. But the Clarisea is so easy to plumb. One straight pipe down with a piece of flex for the 3cm offset. The Thieling needs several elbows and turns. The Clarisea makes less gurgling noises. Both filter the water with extraordinary effectiveness.
I used to run them all the time but now I only use them when servicing my tanks. I was having nutrient issues with them. I even toned down on the skimmer usage, running only 20 hours a day. Filter sock and skimming is too hard on the bacterial balance in our tanks.
I kinda miss the old school wet dry filter floss trays....them I actually took care of 🤣
Were you two sent by god to give out such fantastic informative information on keeping marine aquariums. Keep up the Information great channel guys.
I've got an over-sized skimmer so I use the mesh filter socks. What they don't get, the skimmer gets, and what the skimmer doesn't get, the fuge gets. Seems to work out pretty well for me.
I think there is a peppermint shrimp on your filter sock @ 0:31
😂👌🏻
I just had mine overflow this morning thank God it was a slow spill wasn't as bad as it could have been. But it was my fault I had the overflow opened too much so the pressure was too high causing spillage on the side from the clogged filter sock. Wouldn't have been an issue of I had my overflow pipe set to a slower flow and my return pump not on max power
GREAT video as usual!! Thanks you guys!
lol I just ordered the new ice cap 4 inch socks . I change them out every 3days . thanks brs!
#8 I am hurt I love my mesh filter socks, they are so easy to clean, my wife will not let me use the washing machine anymore, so I clean mine every time they start to overflow. My sump is so much cleaner now.
Been using a filter sock on my salt mixing bin for years as well!
I own a cleaning service. And cleaning socks is very easy IMO. I just put them under water in my sink or tub. And use my hand to get everything out then rinse in RO and toss em back in. I have 5 socks and wash about 2 a week or 3 days.
Works for me and maybe not everyone.
I wash them in bleach bi-monthly
I always run a 150 micron felt sock when I do a waterchange as its pumped in from outdoor shed and the amount of tiny crud that is caught is unreal
Great show
Cheers guys. Man, where can I buy them for $3 bucks each? 😜
I also made the mistake when I built my custom acrylic sump to make the recessed sock holes for the 4” Vertex filter socks (same size as Red Sea’s ). Not realizing they’re slightly smaller then BRS brand and all other 4” filter socks on the market.
I love my 100 micron mesh socks... Filter well enough to clog 3 of them within 4 -5 days, so I change them every 3-4... Washing them is a breeze... Can never go back to felt
I'm all about the mesh socks. I have 3 on my sump, and I just pull one per day on a rotation and rinse it out under the sink. Takes like 2 minutes. Sure, it doesn't filter as well as felt, but I'm also much more likely to keep them clean on schedule since they're so much easier.
Can you try retesting mixing IO salt. Since I aerating the water while l bringing up temperature. Two hours later I add salt. Even after 24 hours mixing with maxi jet. I have no brown build up in white bucket.
In Australia our filter socks for the waterbox 20 are $25 each and only the waterbox socks fitts, buying heaps of them breaks the bank 😑
I wasn’t a fan of the waterbox filter socks. Not sure if they’re available in Australia, but there’s some components made for modifying waterbox aquariums. I replaced the filter sock on my with a Intank media basket, then just use several layers of sponge filter. The media basket did cost more than the filter socks. But should only be that one time cost instead of buying replacement socks.
The media basket that I got did require cutting out the supports out of the tank that held the filter sock plate.
Absolutely hate the felt socks, clog so quickly, difficult to quickly clean. Love the balance with the mesh one's.
I rotate the socks with the dirty socks soaked in bleached for 2 days and then rinse with a dechlorinator sodium thiosulfate used for freshwater chlorine removal.
Running a super dirty tank?
@@jamesparrott2073 not at all just pop mesh one out, so easy to clean as they don't retain muck like felt. I'd much prefer to add a bit of filter floss in the mesh sock than use felt socks.
@@robeperez8626 To much hard work for me.
I just moved back to socks and I just pick up 3 every time I go to a store or buy online... I'll keep that up till I have enough or start replacing the oldest
Also I tried cup... I had to change them twice daily to keep up
Just have that manual roller matt filter made already guys! 😆
I created some kind of table-like insert for the Media Cups that can be 3D printed (Thingiverse look for Red Sea Media Cup) So I do not have to use loads of floss when a little bit goes a loooong way.
Has BRS done a filter roll comparison video yet or performance clip v. socks?
Not a direct comparison, but we did investigate how often changing out filter socks would affect filtration in this video. th-cam.com/video/LOJ6B-0p9c0/w-d-xo.html Since the filter rollers of the world do this automatically, I would guess that it is as effective as changing socks daily.
@@BRStv I’m hoping to get a 200G... are there sumps that come rollers or are rollers an after market add-on? I wanted a Geosreef sump but $$$$!
I'm sure that I'm missing something, but wouldn't a filter sock holder situated above the waterline pretty much fix any problems with its use? Meaning suspending the sock outside of the water, but situated so the return water still runs through them. This way, the rotting matter inside of the sock wouldn't get back into the sump and fuel nitratesamd phosphates. Just my thoughts..
Best filter for water polishing is Vortex diatomaceous earth filter. I was using this in the ‘80’s
I change mine every 4 days- the problem is taking the old ones out and having to wash them right away because if you don’t they stink. They when you do wash them and let them dry out they still stink!!
Yeah, I'm a number 3 kinda guy.. I don't have a 2nd washing machine. although i have a buddy who bought a cheap machine JUST for his tank. He saves more money than i do. It is kinda wasteful.. I think i buy 10 at a time from you guys. The only Damn thing IN this Hobby that's cheap.
Any suggestions for using socks for AIO tanks where the overflow area is a square shape?
Can you lay a square of filter floss over it? It's easier to change and cheaper than a sock, although I don't know if it's as effective.
@@burningmime432 yeah. I’m doing that now. It’s going ok.
The mesh sock could be good for large predator tanks. As for the rollers...seems prohibitively expensive. What's the average per-month cost of replacing the mats?
Cost per month will depend on the brand of auto filter roller you have and amount of debris it's removing from the water. That said, most rolls will last somewhere in the 4-6 week range, so you should expect to spend somewhere in the ballpark of $20 a month on fleece rolls.
@@BRStv Oh, okay, that's not as bad as I thought. Wonder if one would fit in the DIY sump I got...guess I'll have to do further research!
Are there felt socks for a red Sea Max Nano? I can't seem to find any.
Number 21 making the mistake that filter socks and sumps are for salt water tanks, they also apply to Fresh water as well, and make maintenance a breeze :)
Number 22, don't ditch the mesh, see comment below, mesh is great
Number 7.5 / 8.5, addition to the skimmer and mesh touch point you noted getting a 200 micron filter when you only need a 75 micron to catch big chunks and let the skimmer do its job, or if you have multi stages in your sump for filter socks pre filtering in chamber1 with a 75 and chamber 2 with the 200 micron, the latter not that common to find any more but worked great and less buildup occurs in chamber 2
I’ve been following you guys for years. I don’t actually keep Marine anymore alongside my salt Warsop I always used to keep Discus. And now my passion is with them. But there’s still loads of useful stuff you guys come up with that are use daily I just wish there were suppliers and channels out there as dedicated as you guys are. If you ever fancy doing a sideline in high-end freshwater give me a shout I’d love to get involved
I need a playlist of these Top 20 mistakes before I start my very first reef tank
Sumps make it easy to clean vs a canister
My filters seem to be too big for the rolls. Do you have ideas of what should I use?
If my skimmer is overpowered for my water volume, does it then make sense to use the mesh so that my skimmer gets its work in?
You keep mentioning these cheap filter socks, where? Cause the filter socks I need for mine are like $16/sock
Do y’all think it would make a difference putting bio balls inside the filter sock would also help keep the water clean
I just saw that mesh filter you can put bio balls inside , what is your opinion?
The challenge there is that the mesh might get clogged pretty easily. If you're going to use biological media, I would suggest placing in a high flow area of your sump.
Does it matter if my filter socks fold at the bottom I need a 7in by 10 in filter socks but I can only find 7 by 16 can I fold it at the bottom and be okay or will it give me complications?
Might the mesh be a media bag?
Mesh media bags are pretty popular in the hobby. While they're not as effective as reactors where water is forced through the media, they still get the job done in most cases 🙂
For me 3-4 days or when starts to over flow that's at day 4
@K Slay no algea ! I believe it's time for some new ones because I have used them alot there pretty fuzzy lol
does anyone know if its possible to fit a filter sock to a fluval evo 13.5
I know this is one year after video came out but just saw it now.
Filter sock is the most environmentally conscious way to go
0:32 shrimp in the sump..
Hahaha! We've used that shot for the past 6yrs now and still love it when people find him. Like a little Easter Egg hunt. :P
@@BRStv Honestly, I have seen this shot before a once or twice, but I only noticed him now. Feels like I won a prize for spotting him hahaha.
My favorite is number 14
When's the sale??
Any idea why my skimmer goes crazy when i change my filter socks? I was them by hand 4 gallons of water to 1/4 bleach rinse and rinse then sit out to dry for least 2-3 weeks. Any idea?
Usually that happens when there is some sort of residue on the socks. Try rinsing them out with some RODI water before you put them in the sump next time to see if that helps.
That pollution in the tank should be hitting the skimmer if you aren't regularly changing the socks also.
WHERE can you buy these socks for $2? cheapest I am fiding is like $6-$8
Filter socks are a pain, but roller mats add cost and complexity. Someone please design a manual roll. I could be very diligent and manually crank a roll to expose a fresh section of the mat twice a week. It's a really simple solution. Someone point me in the right direction if this is already a real product
I wld think it wld clog pretty quick(being a flat ... thin?... surface and wld need to be turned a lot more than 2x's a week(perhaps even twice a day?) using a manual roller, hence the reason it's automatic! True? False?
I use a power jet washer .
Where can you get a whole tank sediment filter?
And do you plumb it to your return pump?
That would be a little bit of a DIY project. We do sell larger 20" canisters that you could plumb in with your return with the proper fittings.
www.bulkreefsupply.com/reverse-osmosis-canisters.html
@@BRStv thanks. What micron filter do you reccomend
I have a drain pipe on bottom corner of my tank designed for water changes but sometimes hook up a sediment filter and let it run into the sump for a couple hours.
(Can't have it constant in case of a power cut).
Can also hook up a cheap small return pump onto the sediment canister for 'gravel/sand' cleaning running the water back into the sump/tank too.
Love the felt socks for blowing off the rock. Crank up the powerheads and hold the sock over a powerhead and collect a lot of the stuff out of the water.
Please tell me where i can find them for 3 bucks?
I wonder if the Pep Shrimp gets royalty fees every time BRS talk about filter socks 🤔
When you felt pad, do you mean filter floss.
I'm watching this video, realize I need spare filter socks and not the mesh ones that came with my red sea tank, pause the video go buy them from amazon. Keep watching the video, realize that red sea filter socks are proprietary and 4in socks wont fit right... I cancelled the order, but damnet...
We sell the mesh Red Sea socks here if you're in need of them: www.bulkreefsupply.com/mesh-filter-sock-with-plastic-ring-red-sea.html
Filter socks suck. Filter cup with floss. Just toss out old filter floss and add new stuff.
What kind of floss though? And where do you get it?
Socks cost £10 here. You're just like "buy 40 of them". That's over 500 US bucks!
They are $6 each on their own website..... Not everyone gets an employee discount. Lol
Weird. Title is filter socks as best filter but there's another video that they both said they would never use them
If you can avoid these mistakes 🙂 Sometimes reefers need to be honest with themselves and know which maintenance items they're actually going to maintain. If you go into it knowing that you're not going to use the filter properly, it's best to pick another tool (like an automatic rollermat) to get the job done instead.
Never understood filter socks especially since filter floss pads predate it, & solve that HUGE problem you had with the holes for socks in the sump lol just cut out a nice big rectangle & done PLUS yall nasty for putting that decomposing thing in your washer, seems about white
Why would anyone buy a pre-made sump? They are the biggest scam in this hobby IMO. Just make your own, it's incredibly easy and you can make one for under $50 easily depending on the size
wow what an inconvenience, lifting one out to drop another in wtf
Mess for putting GFO or carbon in. Don't run the thicker shocks as they = too much work thats why I use a skimmer.
I use 10 micron so they clog every three days and then I replace them.
Socks sound like more of a pain then not having them.