I need help with the last screw on the upper body you didn't screw out 😅 It's the one with the two O rings (outer=white and inner=black) near the solenoid. The inner seal (black) cracked and I can't fit the new one rightly. When I screw in the new seal, the screw presses it out of the screw hole towards the solenoid
So if I need to replace the wires because they were pinched I don’t need to take the whole solenoid out?? Only the hooks that are keeping the wires in place?
I accidentally lost the little piece that separates the lever on the feedneck from the body which he describes at 7:22 . where can i get a replacement ? i looked on ans and shockers website couldnt find any.
ANSgearPaintball I actually got in touch with them via shocker paintballs Facebook fan page this morning and they got back to me in a matter of hours so I'm all sorted. Thanks !
My rsx continuously says “eye fault” and is not shooting but I cleaned the eyes a bunch of times and still it doesn’t shoot. Can someone please help. I don’t know if I’m just not cleaning the eyes properly cause this is my first high end marker but I’m pretty sure that I am.
ANSgearPaintball rory i am having the same issue.. eye fault and it will not fire.. everything else with the eyes seems fine. It reads there is a ball in the breach but when i pull the trigger it reads eye fault
I have an old shocker with the blue firing can, what do i need in order to get the gold firing can, i need to send the Whole marker, Just the Bolt and the serial number or Just the serial number
Hey so the power button on my HK Shocker fell out while I was playing. Is there somewhere that I can order like a replacement part? I noticed that the HK version and Stock version have a different power button.
A reason i found that makes it leak out the back is the spring that is on the back of the bolt is put in backwards and the backplate isnt able to screw all the way in and leaves a gap.
In part 18:40, how would you suggest to heat the brass holder to get rid of the loctite? In order to open the brass holder?
ty needed help breaking down the asa for a leak
I need help with the last screw on the upper body you didn't screw out 😅 It's the one with the two O rings (outer=white and inner=black) near the solenoid.
The inner seal (black) cracked and I can't fit the new one rightly. When I screw in the new seal, the screw presses it out of the screw hole towards the solenoid
Having problems when the 2 grip frame screws are tightened. When loosened things work normally
So if I need to replace the wires because they were pinched I don’t need to take the whole solenoid out?? Only the hooks that are keeping the wires in place?
Can you break down the bolt latch ?
I accidentally lost the little piece that separates the lever on the feedneck from the body which he describes at 7:22 . where can i get a replacement ? i looked on ans and shockers website couldnt find any.
The part number is QLK206. We don't sell it, but I would recommend contacting GOG about it at 724-520-8690. Hopefully they'll have it for you.
ANSgearPaintball I actually got in touch with them via shocker paintballs Facebook fan page this morning and they got back to me in a matter of hours so I'm all sorted. Thanks !
My rsx continuously says “eye fault” and is not shooting but I cleaned the eyes a bunch of times and still it doesn’t shoot. Can someone please help. I don’t know if I’m just not cleaning the eyes properly cause this is my first high end marker but I’m pretty sure that I am.
did you clean the hole where the eyes sit? cleaning the eyes won't help if there's still paint in the hole.
ANSgearPaintball rory i am having the same issue.. eye fault and it will not fire.. everything else with the eyes seems fine. It reads there is a ball in the breach but when i pull the trigger it reads eye fault
My OLED screen isn’t turning on but power button is, what do I do
Rory how do i contact you. I do have the old blue bolt and id like to get it swapped out.. please let me know the best way to get that done
For this you can call in. 805-522-8700
Or reach out to Shocker direct: Phone Number
Monday-Friday 10am-5pm (eastern)
(724) 520 8690
I have an old shocker with the blue firing can, what do i need in order to get the gold firing can, i need to send the Whole marker, Just the Bolt and the serial number or Just the serial number
Which model Shocker do you have? NXT, SFT, RSX?
ANSgearPaintball rsx
Ok, you'll need to call SP about it. You can reach them at (724) 520 8690 , Mon-Fri - 10am-5pm Eastern
Hey so the power button on my HK Shocker fell out while I was playing. Is there somewhere that I can order like a replacement part? I noticed that the HK version and Stock version have a different power button.
Contact Gog about getting a replacement.
Hey would u know Rory why my bolt is leaking outta the back part of my shocker the gun is new with no field play on it yet
A reason i found that makes it leak out the back is the spring that is on the back of the bolt is put in backwards and the backplate isnt able to screw all the way in and leaves a gap.
how often would i need to maintenance it?
That depends on how often you play It is always good to maintain your marker after a long day of play.
Ok thanks
If I order it from u do I get the gold can
yes
I need a guide like this for the shocker xls.
For the most part the o-rings and maintenance will carry over from the RSX to the XLS. The Regulator, bolt, and solenoid are maintained the same way.
Ion!