Master Your Cabinet Lighting: Expert Tips to Hide Ikea Power Supplies Effortlessly
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2024
- 💡 How To Hide Ikea Power Supplies 💡
Figuring out where to stick that power supply for your Ikea cabinet lights can be a bit of a head-scratcher because it's gotta play by the rules of your local electrical code. But don't worry, I'm here to help!
In this video, I'll spill the beans on where I planted mine and break down how I sneak those low-voltage wires from the lights to the power supply. So, let's roll and get those lights shining where you want 'em! 💡🔌
Let's get started!
💡 00:00 Introduction
💡 00:10 No help from Ikea
💡 00:44 Who won?
💡 00:55 DISCLAIMER
💡 01:29 What is the problem?
💡 02:10 Option 1: Microwave Hood Cabinet
💡 03:11 Option 2: Going Down Under
💡 05:17 This is how I do it.
📺 Watch now to learn this important Cabinet Light Hack: How To Hide Ikea Power Supplies for the Mittled spotlights, under cabinet lights, and in-drawer lights, and brighten up your kitchen: / @kitchensbyrannes
📺 Related Videos:
1. • Install IKEA Kitchen L...
2. • How to keep the wires ...
3. • How To Install Ikea Mi...
❤️ 🔎📐💡✏️📏🗓️🔎📐💡✏️📏❤️🗓️🔎📐💡✏️
DID THIS VIDEO ADD ANY VALUE TO YOUR INSTALLATION❓
If it did, please consider sharing some love ❤️and appreciation 🙏with me right here:
kitchensbyrannes.com/product/...
ARE YOU IN THE PLANNING STAGE OF YOUR NEW KITCHEN❓
Making sure your plan is installable could save you a lot of headaches later.
I am here to help: kitchensbyrannes.com/ikea-kit...
TOOLS 🪛🔨 🪚
#CommissionsEarned
MY AMAZON STORE: amzn.to/3wcbdGL
My Power Tool line-up: amzn.to/3UvdkPA
My Tool Storage System: amzn.to/3UtVfRT
My Small Tools: amzn.to/3Uc9TeZ
Extra materials needed for a complete Ikea kitchen installation: amzn.to/44a5KNe
Screws and Anchors for Suspension Rails: amzn.to/3Ur9Jls
Please note: As an Amazon Associate, I earn a commission from qualifying purchases at no cost to you.
#ikea #KitchenLights #LightingInstallation #KitchenUpgrades - แนวปฏิบัติและการใช้ชีวิต
BRILLIANT!!! I am in the midst of a full kitchen reno, removed 12" soffits, removed the old uppers, lowers and counters and gutted the room to the studs. I have been wracking my brains on how to do my upper and lower under cabinet lighting but this is 1000% the answer. AMAZING!
Thanks 😊
Be sure to watch them all then 🙏
IKEA CABINET LIGHTS: th-cam.com/play/PLc79sriClvMTyASsgk5chJPwYmFmDhqB7.html
Good luck with your project 😃
As always you have provided some very useful tips here, not least the note at the start about being safe with Electricity. Thank you.
Thanks, you're very welcome 🤗
Your videos are so appreciated!
Thanks 🙏
Nice one.
Thanks 😊
Nice shoes 🤣🤣🤣
Thank you by the way 😉
That's my special safety shoes 🤣🤣
We hid ours behind the fridge. Used the pug back there (1 for for fridge 1 was free) and then screwed it into the wall and ran the cables from there. The fridge covered all our evidence.
That's an option too. 👍
Sometimes that's not sufficient though if you have a galley kitchen, as an example.
Hi again :). Question: Can I connect two VAGDAL 3.5m cords together in a longer reach application? We have one under cabinet light that we’d like to fish that will require more than 3.5m. Thx in advance!
Hi Mark.
I don't see why you couldn't. I'm sure an electrical engineer would could come up with a formula saying why it would be an issue, since the resistance increase with the length but I wouldn't worry. If you only need to extend it with a meter or so, no need to use the full 2x3.5 m.
Just spline them together. Soldering with added crimping plastic is best, but I'm sure less fancy solutions will suffice. Let me know here how it goes.
@@kitchensbyrannes turns out we were able to fish it such that we could reach using one length of Vagdal. Thx!
How can you say it isn't code to have a receptacle in a cabinet when you have a receptacle in the hood cabinet?
I'm asking that very same question to electricians here in Ottawa too and every time I get the same reply. One is to code (for microwave hood) and the other not. Doesn't make sense to me either 😮
Hi! Is there a way to connect the lights to a corner cabinet and then to the next cabinet. My kitchen is L shaped 😕
Thank you for your question.
If you have a 26x26" corner cabinet, you'll use two 15" lights, one in each direction connected to the light under the respective adjacent cabinets.
@@kitchensbyrannes Thank you for such a fast response! Your videos have been so helpful. Revonating the kitchen during the day and watching your videos at night 😀
You're very welcome. I'm glad that you find the videos helpful 👍
You could use a magnet on a string, sometimes easier. Meget morsome skor.
Thank you for your suggestion.
Only possible if the wire is magnetic 🧲 ☺️
In welchem Land ist das schon wieder aufgenommen 😂 Amiland? Wieso habt ihr eigentlich nur Pappwände?
Ja, Nordamerika. Kanada, um genau zu sein. Ja, wir machen meistens so, als ob Bau.