Thank you very much. I have two Growatt ES 6000 plus, I want to put them in parallel now I wonder if I can connect the BMS to which Growatt?. Thank you in advance
Great info. I just need to know whats the pin order 4th pin CAN H , 5th pin CAN L 6th pin Ground in the Growatt 5000es side. Is ground pin matters? My battery ground pins are PIN 2, PIN 7 CAN L and CAN H are correctly aligned
What order in the cable then aka Color order? Close picture on the cable head to see the colour order= Null modem? RJ45 head Write colour to the left nr2 colour etc due to missing the cable !
Can you explain how you connected 3 inverters to 4 batteries? Someone told me: Growatt SPF 5000 ES in parallel its only need to connect the main inverter to batteries in parallel. The Growatt SPF 5000 ES parallel cable will get the needed data from the slave inverters.
Check the communication ports of each inverter. If you have the new version the ports will be BMS and RS485. In that case you connect the batterie to the Master inverter (Probably it doesn't matter in which one you connect them but I prefer the Master one). If the ports are CAN and RS485 you will need a Hub. (Or you can make your own cable.)
Hello: I have 16 model: 3.2 v 280 Ah batteries along with “Overkill Solar” battery management system. I have cut the wood that I will be using to construct the bottom of my wooden frame to hold all 16 batteries. I would like to purchase battery tape to provide support to all 16 batteries and to secure the battery terminals. After I’ve connected each one of the BMS leads to the positive terminals which includes the black lead to the negative terminal and the red lead to the positive terminal, I’m not sure what battery wires and devices should I use to connect two Growatts 3,000 kilo watt inverters to the 16 batteries. Would you do a video on this or provide an answer on this? Regards, Gabriel L.
Hello sir I've the same problem 6 rosen lithium battery with 2 growatt in parallel Could you please inform me the way you have connected the batteries with the inverters? How did you connect the rj45 connector?
Small hint: Energy cannot be saved. So if I want to boil my water, I always have to use the same amount of energy for one liter. Christian's method relies on a longer period of time with less power in order to be able to use the power provided by the PV as efficiently as possible - so consumption peaks are intercepted. In the end, the energy consumption should even be (slightly) higher due to the interposition of the dimmer, but it doesn't matter, since more efficient coverage by the PV system and therefore better use of the self-generated energy .......... .... 🌞 ................ Solar Mini PV Tip ... Winter & Camping. A boiler and other hungry electricity consumers can be infinitely dimmed using the "5000W dimmer". Ebay €7. I run 5 dimmers in parallel on an 850W inverter. Kettle 2.2KW at 150W runs 12 hours a day, so the water is always hot. The room is also nicely heated. 2.5KW washing machine runs in parallel with dimmed to 200...400W. Iron, dishwasher, oven, electric heater, coffee machine, all internal heating are throttled with me. Videos on my channel th-cam.com/video/eC2olbCBhh0/w-d-xo.html The inverter stays cool, quiet and the MOSFETs + (battery) remain intact because no extreme current peaks arrive at the inverter. Now every Mini PV Inverter is enough to sell large devices. So, with the dimmer, all internal heaters/devices can be converted into base load devices that stay almost permanently ON, drawing very little current directly from the PV. With a wattmeter / energy cost measuring device you can then measure this perfectly in order to optimally set the dimmer. With the dimmer, self-sufficiency will now increase from 20% to almost 95% in summer, which means a huge breakthrough. The prerequisite is that you have at least a small balcony power station, and you don’t need an expensive battery either. Example of a kettle: Without a dimmer, the 2500W - 600W PV system needs = 1900W, which you have to pay more for. If I turn the kettle down to 600W with a dimmer, then every weak PV system can now supply each consumer independently and independently, because the 2500W kettle becomes a 600W kettle thanks to the dimmer. Magic... The 2000W e-heater becomes a 500W e-heater with a dimmer, which can run 12 hours a day free of charge via PV. th-cam.com/video/QbLWDbJi6ew/w-d-xo.html . The 4000W oven is also tamed. Not the solar systems have to grow, but the consumers just have to drop by 75%, which is sooo easy with the dimmer. are you convinced now I have already switched my entire household to dimmers. Please have a look at my channel. LG, Christian ................................
Ще пуснеш ли настройките за паралел и за батериите които си сложил на инверторите , правя подобна система само че с 2 инвертора в паралел и 10kw lifepo4. Благодаря
01. I tried from 01 to 49 but, with no luck. The batteries are from Rosen Solar. 01 Is working but the inverters think that there is only one battery connected. My guess is that the Master-Slave option on those batteries is not working.
@@aurorasolar5445 Yes. All the batteries are connected with RS485. And from the main battery goes to the RS485 port in the Inverters. The communication is working, but the maximum charging current is split in 3 (3 inverters of 30A, total 90A which is the charging current for only one battery)
Thank you very much. I have two Growatt ES 6000 plus, I want to put them in parallel now I wonder if I can connect the BMS to which Growatt?. Thank you in advance
Thank you very much. I have two Growatt ES 6000 plus, I want to put them in parallel now I wonder if I can connect the BMS to which Growatt?. Thank you in advance
Thank you very much. I have two Growatt ES 6000 plus, I want to put them in parallel now I wonder if I can connect the BMS to which Growatt?. Thank you in advance
Upload more about this bro, you're doing good!
Great info. I just need to know whats the pin order 4th pin CAN H , 5th pin CAN L 6th pin Ground in the Growatt 5000es side. Is ground pin matters? My battery ground pins are PIN 2, PIN 7 CAN L and CAN H are correctly aligned
What order in the cable then aka Color order? Close picture on the cable head to see the colour order= Null modem? RJ45 head Write colour to the left nr2 colour etc due to missing the cable !
I am pretty sure you only connect to master of course is good to connect the 3 just because you. Don’t need to worry about startup order
which pin in the plug is used?
I need ur complete video of the installation of the 3 grow watt inverter
Next week I will be reinstalling them. I will try to make more informative video.
Can you explain how you connected 3 inverters to 4 batteries? Someone told me: Growatt SPF 5000 ES in parallel its only need to connect the main inverter to batteries in parallel. The Growatt SPF 5000 ES parallel cable will get the needed data from the slave inverters.
Show us the cable pinouts
Hello Sir, when we put 3 Growatt in parallel. In which Growatt should we put the BMS as long as we do not have a Hub
Check the communication ports of each inverter. If you have the new version the ports will be BMS and RS485. In that case you connect the batterie to the Master inverter (Probably it doesn't matter in which one you connect them but I prefer the Master one).
If the ports are CAN and RS485 you will need a Hub. (Or you can make your own cable.)
Hello:
I have 16 model: 3.2 v 280 Ah batteries along with “Overkill Solar” battery management system. I have cut the wood that I will be using to construct the bottom of my wooden frame to hold all 16 batteries. I would like to purchase battery tape to provide support to all 16 batteries and to secure the battery terminals.
After I’ve connected each one of the BMS leads to the positive terminals which includes the black lead to the negative terminal and the red lead to the positive terminal, I’m not sure what battery wires and devices should I use to connect two Growatts 3,000 kilo watt inverters to the 16 batteries.
Would you do a video on this or provide an answer on this?
Regards,
Gabriel L.
Би ли пуснал една снимка на буксата с 3-те кабелчета и в кой порт я вкарваш на инвертора. BMS или RS-485
Nice Job Sir! Keep it up! I Subbed for more videos :) - We have to support our DIY Solar Communities!
I am pretty sure is the same cable than the regular utp patch panels.
Hello sir
I've the same problem
6 rosen lithium battery with 2 growatt in parallel
Could you please inform me the way you have connected the batteries with the inverters?
How did you connect the rj45 connector?
how did you connect the pins in the plug on both sides?
Thanks for the video! Is it possible to setup 3-phase system from the same 3 growatt inverters?
Yes. You can do that by changing the settings of the inverters.
@@golden4o thank you!
Hi. Are your battery packs same off each invertor? I.e. 3x battery packs?
3x inverters with 4 batteries of 9.6 kwh
Everything is connected in parallel.
Small hint: Energy cannot be saved. So if I want to boil my water, I always have to use the same amount of energy for one liter. Christian's method relies on a longer period of time with less power in order to be able to use the power provided by the PV as efficiently as possible - so consumption peaks are intercepted. In the end, the energy consumption should even be (slightly) higher due to the interposition of the dimmer, but it doesn't matter, since more efficient coverage by the PV system and therefore better use of the self-generated energy .......... .... 🌞 ................ Solar Mini PV Tip ... Winter & Camping. A boiler and other hungry electricity consumers can be infinitely dimmed using the "5000W dimmer". Ebay €7. I run 5 dimmers in parallel on an 850W inverter. Kettle 2.2KW at 150W runs 12 hours a day, so the water is always hot. The room is also nicely heated. 2.5KW washing machine runs in parallel with dimmed to 200...400W. Iron, dishwasher, oven, electric heater, coffee machine, all internal heating are throttled with me. Videos on my channel th-cam.com/video/eC2olbCBhh0/w-d-xo.html The inverter stays cool, quiet and the MOSFETs + (battery) remain intact because no extreme current peaks arrive at the inverter. Now every Mini PV Inverter is enough to sell large devices. So, with the dimmer, all internal heaters/devices can be converted into base load devices that stay almost permanently ON, drawing very little current directly from the PV. With a wattmeter / energy cost measuring device you can then measure this perfectly in order to optimally set the dimmer.
With the dimmer, self-sufficiency will now increase from 20% to almost 95% in summer, which means a huge breakthrough. The prerequisite is that you have at least a small balcony power station, and you don’t need an expensive battery either. Example of a kettle: Without a dimmer, the 2500W - 600W PV system needs = 1900W, which you have to pay more for. If I turn the kettle down to 600W with a dimmer, then every weak PV system can now supply each consumer independently and independently, because the 2500W kettle becomes a 600W kettle thanks to the dimmer. Magic... The 2000W e-heater becomes a 500W e-heater with a dimmer, which can run 12 hours a day free of charge via PV. th-cam.com/video/QbLWDbJi6ew/w-d-xo.html . The 4000W oven is also tamed. Not the solar systems have to grow, but the consumers just have to drop by 75%, which is sooo easy with the dimmer. are you convinced now I have already switched my entire household to dimmers. Please have a look at my channel. LG, Christian ................................
Can you show cable pin out?
Are the AC outputs from the inverter connected together in these types of configurations ?
If you are going for a single phase, then yes.
Ще пуснеш ли настройките за паралел и за батериите които си сложил на инверторите , правя подобна система само че с 2 инвертора в паралел и 10kw lifepo4. Благодаря
is it possible to limit the output power in order not to overtax the battery?
No, you will have to manage your power consumption, as everything is going through the inverters.
in order do not cut the cable can i use a lan hub thank you
I haven't tried with a lan hub. But I don't think It will work.
По едно видео на всеки 4 години ✌
what is the protocol number that are you using in inverter
01. I tried from 01 to 49 but, with no luck. The batteries are from Rosen Solar. 01 Is working but the inverters think that there is only one battery connected.
My guess is that the Master-Slave option on those batteries is not working.
@@golden4o did you use can port to connect inverter, and rs485 to parallel batteries?
@@aurorasolar5445 Yes. All the batteries are connected with RS485. And from the main battery goes to the RS485 port in the Inverters. The communication is working, but the maximum charging current is split in 3 (3 inverters of 30A, total 90A which is the charging current for only one battery)
Інформації нуль... Щось якось і через щось
Клятий інвертор не хоче з батареєю працювати... Хоч би десь знайти інформацію про режими пункта 36...
Zero Information here.
Hi
spain pliz :)
Thank you very much. I have two Growatt ES 6000 plus, I want to put them in parallel now I wonder if I can connect the BMS to which Growatt?. Thank you in advance
@@Mboliaka It doesn't matter. If the inverters are in parallel you can connect the BMS to either of them.
@@golden4o Thank you
Hello Sir, when we put 3 Growatt in parallel. In which Growatt should we put the BMS as long as we do not have a Hub
Thank you very much. I have two Growatt ES 6000 plus, I want to put them in parallel now I wonder if I can connect the BMS to which Growatt?. Thank you in advance