In this video, I learnt how to use EKTS schematic diagram language to describe the DOL motor starter and the need of keeping contact. Thank you, gentleman, and may God bless you:)
Thank you sir for making this simulation video about Direct Online Motor Starter. This will help us to learn how to operate it and analyze the things that will happen if we are going to open the main circuit breaker and open the pushbuttons which give us more idea who this DOL motor starter works.
In this video I learned that how to simulate the the basic direct online motor by using the the diagram. it helps us students to easily understand by using the diagram. Thank you for this video sir
In this video i learned the how the DOL motor starter using EKTS schematic diagram words and the importance of holding contact. Thank you sir Godbless:)
Thank you for another learnings. I learn how to trip and how to fix the contactor when its trip and I learn in simulation of DOL motor starter and what is the use of holding contact and how the coil functions and turn the normally open to close and close to open. Keep it up sir thank you❤️.
Maraming salamat sir , dahil marami akong natutunan this video DOL motor start works, and especially pag nag activevate ang coil contactor, lahat ng normally open ay mag coclosed then ang normally closes mag oopen.
Salamat sa bagong video. sir ang natutunan ko sir sa holding contact kahit bitawan mo pa siya. Nag e energized parin at isa na din ang parallel connection.
Good day sir. In this video i learned how important (effective) diagram and help us student how to stimulate the basic direct online motor by using the diagram. Godbless sir
In this video,I learned the Simulation of DOL motor starter using EKTS, If we on the circuit breaker the Red and Yellow lamp will be function because the connection of Yellow and Red lamp is normally closed so if we push on the starter button the all normally open will be turn into normally closed so that the current flow in to the motor. Also i learned in diagram there have 2 circuit which is the Control System and Power Circuit. Thank you sir for sharing your ideas ❤️
I've learned about this video, Simulation of DOL Motor Starter using EKTS, If the breaker is on, but the motor is off and the Yellow and Red is on and the Green is off, Because the holding contact are open, and then if the holding contact already close the motor is already on and the Yellow and Red will off. That's all sir, God bless and keep safe always. ❤️
Thank you sir. I learned how to simulate DOL Motor Starter using EKTS schematic diagram. Nalaman ko rin kung anong ang purpose ng holding contact in the circuit. And in this video sir I learned how to analyze what lamp will open if we open the breaker, and nalaman ko rin on how to interrupt the coil or de- energized the coil.
Thank you sir for sharing your knowledge on how to simulate the basic direct online motor starter using EKTS. In this praticular circuit or also called EKTS there is no overload relay unlike in the previous video. I learned that the moment we start the breaker the yellow lamp will on, the green lamp will off, the red lamp should be on. The moment we start the breaker the motor will not on because the connection of wires cannot proceed to the loads.
In this video sir I'v learned about the simulation of DOL motor stater by using EKTS. And the use of holding contact to the diagram and the holding contact is connected in parallel with your push botton. Thank you sir..
Goodmorning sir❤️ Done watching sir for this video Simulation of DOL motor starter using EKTS may natutunan nanaman ako bagong circuit on how it works, on how this 2 circuits the Control Circuit amd The power circuit works, i have learned that if there's same MC1 in the circuit It means it is same component it is same contactor and the moment na e on ang breaker in simulation of DOC starter using EKTS is the 2 lamps will light the yellow and red because it is conected already but green lamp will not light because the start button is normally open but when you click it the green lamp will light even if you dont hold it because of holding contacts connected in parallel circuit also the motor will activate and the two lamp yello and red will not light when you click the start button. Thanks for this video sir Godbles you and keepsafe❤️
2.Thank you for another sharing of knowlegde about electric technology sir i learned in this video is when you start the breaker kailangan tignan natin mabuti kung hindi ba sya naka normaly open. dahil kung normaly open sya hindi makaka daan yung kuryente. we make sure that the yellow lamp first is open and the red lamp also will open. and the motor is off. after that the current is can flow and the MC1 is activated. and all normaly open will going to closed and all normaly close will open. I got it sir.. thank you..
Thank you sir! I learned how to simulate the DOL Motor Starter using EKTS schematic diagram. Also, I learned how holding contact work in parallel circuit.
Salamat sa another video sir natutunan ko po dito ay dapat Kung anong I off or on mo dapat Alam ko Kung saan sya gagamiton at Kung aning purpose Niya. Holding conductor din sir ay pag napindot mo Ito kahit bitawan mo pa Yung button the conductor will remain energized.
I learn in this vedio on simulation of DOL motor starter using EKTS schematic on what is the purpose of holding contact and how to put in the motor and connect in to parallel circuit , thank you sir 😊
thank u sir for your wonderfol presentation it is very important to all student to learned that using the diagram (EKTS) really help us to understand the lesson the basic direct online motor by using the the diagram. it helps us students to easily understand by using the diagram.
Good day sir! In this video I learned about simulation of DOL motor starter, Schematic diagram is divided into two circuit a control circuit and power circuit, I learned also especially a holding contact becase current can flow and remain energized, de energized of contactor when u push a stop button. And when you start the breaker the yellow lamp is on the green off and red is on. But when you push the strt button the current will flow to activate the mc1 coip because all of the normally open will close and the normally close will be open, the moment you push the stop button the current cannot flow so that the coil is off and all the normally close back to normally open and also the motor will stop.
Thanks for this video sir. I was able to learned that using an effective diagram really helps to understand the lesson. also i learned how holding contact work in parallel circuit.
Thankyou for this video I've learned how to simulate dol motor start using ektc schematic diagram I also found out what the purpose of holding contact is in the circuit. and this video i learned how to interrupt the coil de energized the coil.
I learned in this video is how the motor start and how to simulate the basic direct online motor using software of EKTS also i learned the important of holding contact in this diagram because it illustrates the function of it self and current can flow and remain energize when you push the stop button.
i learned for this video sir is how to simulate the basic direct online motor using software of EKTS also i learned the important of holding contact in this diagram because it illustrates the function of it self and current can flow and remain energize when you push the stop button.
Thankyou sir In this video topic helps to me to understand on how to start the motor by using holding contact, in the diagram you shown in a computer ☺️ thank you sir god blessed
Good day sir done watching i learned for this video sir is how to simulate the basic direct online motor using software of EKTS also i learned the important of holding contact in this diagram because it illustrates the function of it self anf current can flow and remain energize when you push the stop button thankyouu for this vid sir
I learned this video about simulation of direct online starter. In the diagram example there is not have overload relay unlike wise the in the previous discuss. Also I learn that the moment of start breaker the yellow lamp is be on and the green lamp is will be off and also the red lamp is on.
Thank you for this video sir.I learned that how to start direct online interm of it's function.And how to read the diagram from source to the motor and the two circuits the control circuit and power circuit.
thank you sir for a very good video, that how to simulate the the basic direct online motor by using the the diagram It allows you to design variety of electromechanical systems using relays, time relay buttons and motor effective diagram helps student to understand their lesson and also I learned the topic about our previous simulation
After watching the video I learned how effective diagram helps student to understand their lesson and also I learned the topic about our previous simulation. Thank you sir for sharing your knowledge.
Great video sir about the topic simulation of direct online motor starter, i learned how to wire the contactors and the function of each components which is very important to familiarize to know how to use it
Done watching ❤️. Thank you sir for Very well explained. As a student in Maritime field it is important to us to know and learned the working principle of Dol motor starter its because in the near future we possibly encounter this onboard ship. In the other side, I've learned that the simulation motor starter using EKTS is not have an overloaded relay. Hence now know that in our schematic diagram we has two parts the control circuit and power supply.
Thank you sir. The schematic diagram is divided into two,which is the control circuit and power circuit. EKTS diagrams really helps a student like us to understand more about direct online. It really helped me to understand more about holding contact.
This video sir many previous topic has been part or it and good for it sir we already know how it work and it is easy to understand *parallel circuit and holding contact
Done watching sir I've learned in this lesson sir the purpose of holding contact kahit bitawan mo yung push botton the contactor will still energize it will stop only when you press stop button. And important to understand the diagram.
In this video I learned that how to simulate the the basic direct online motor by using the the diagram. And the Schematic diagram is divided into two circuit. That's all thank you sir❤️
I learn in the video on how to simulate the basic direct online motor using the diagram. The schematic diagrams shown that it is divided into two. Thanks sir
Good eves sir done watching sir i learned in this topic is the basic parts and what is there purpose, also this circuit have holding contact so that the flow of current is stable untel you press the normally close push button switch. That all i learned sir thanks and Godbless you, advance merry Christmas sir 🎊🎊🎉🎉
Good Day sir. In this video i have learned about,how important holding contact in this diagram because it illustrates the function of it self, and also the thermal over load relay even though wala siya sa diagram na ipinakita sa video na ito, pero from previous video we can identify it's funtion and significance.
Thanks for this video sir. I was able to learned that using an effective diagram (EKTS) really help the students to understand the lesson . In this video also shows the combination of the previous simulation(holding contact ,interlock, series and parallel).
Good morning sir..thanks for another video that you shared with us sir. I learned about the topic simulation of (DOL) Motor starter using EKTS. With a schematic diagram is divided into two circuit a control circuit and power circuit.this simulation shown of what is the the flow of each line using operation that in turning on the breakers or RST supply.but when you push the starter button the current Will Flow to activate the mc1 coil. That's it sir thanks.
In this video, I properly understand the purpose of holding contact even though you release the push button, the contactor will still energize it will stop only when you press stop button. And I also learned Schematic diagram is divided into two circuit.
I learned about the simulation of DOL motor starter using EKTS. This lesson is mostly similar to the topic of holding contacts that has been discussed lately but there are some components that has been added to the circuit diagram. As same as to the holding tanks, when the coil is being activated, all normally open will close and all normally close will open. In order to de-energized the contactor, put a stop button to interrupt the current if necessary.
Thanks for this video sir. I was able to learnt that using an effective diagram (EKTS) really help the students to understand the lesson . In this video also shows the combination of the previous simulation(holding contact ,interlock, series and parallel).Keep safe sir.🌻😇
I learned in this video is how the motor start , when the breaker will start only without pushing the start button the motor will not start but when you start the breaker & push the button the motor will also start and all the MC1 that normally close will open/all the normally open will close .
By watching this video, I learned that the schematic diagram video is divided into 2, the control circuit and the power circuit. It allows you to design variety of electromechanical systems using relays, time relays, buttons, motors, switches and some basic mechanical systems.
Thank you sir, for sharing ideas about how simulation motor start by using EkTs, if you switch on the breaker the holding contact Mc1 will push the start button the. Motor will also on, tsaka. Na on narin yung green light
In this video, I learned some uses of parts, especially the holding contact. The porpose of holding contact is whenever you unhold the pust button,the contactor will still energized.l,and it will stop only when we press the stop button.
Good day sir. EKTS motor control circuit simulator allows building custom motor circuits using different motor types, including single and three phase motors, in different quantities.
video air many previous topic has been part or it good for it sir we already know how it work and it is easy to understand parallel circuit and holding contract.
I learned the simulation of a direct online motor starter. In the diagram there is no overload relay, In the control circuit there are the components of coil, contactor, holding contactor, lamps and buttons. The power circuit compose of the motor and normally open contactors.
i learn that a DOL starter (also known as a direct on line starter or across the line starter) is a method of starting a 3 phase induction motor. In a DOL Starter, an induction motor is connected directly across its 3-phase supply, and the DOL starter applies the full line voltage to the motor terminals.
I learned that a direct online starter consists of two buttons, a GREEN button for starting and a RED for stopping purpose of the motor. The DOL starter comprises an MCCB or circuit breaker, contactor and an overload relay for protection. These two buttons, i.e. Green and Red or start and stop buttons control the contacts.
In this lecture Ive learn how to start the Direct online starter using the software of EKTS and also We discuss the components of the DOL the EKTS does not have an Overload relay. Also In the schematic Diagram we have to parts the Control and Power Circuit. Also in this Lecture we use an Parallel to use the holding contacts in the simulation in the EKTS we found that in Turning On the breaker or RST supply Our Coil does not energize because of the Push button Start the both lamps Red and Yellow is On while the green is off it because our coil does not energize, When we click the star push button it Hold our push button in t normally close thats why the Coil is energize now and the all MC1 will flow the current because of all normally open will close and the normally close will open and our motor is On , Stay safe and GOD bless
In this video I learned the simulation of a direct online motor starter. In the diagram there is no overload relay unlike the previous discussion. In the control circuit there are the components of coil, contactor, holding contactor, lamps and buttons l. On the other side the power circuit compose of the motor and normally open contactors.
Good Day Sir! This circuit have holding contact so that the flow of current is stable until you press the normally close push button switch. With a schematic diagram is divided into two circuit a control circuit and power circuit this simulation shown of what is the flow of each line using operation.Thank You!
EKTS is a motor control simulation software for designing Electromechanical Systems. It allows you to design variety of electromechanical systems using relays, time relays, buttons, motors, switches and some basic mechanical systems.
In this video, I've understand how important holding contact in this diagram because it illustrates the function of it self and to simulate the basic direct online motor using software of EKTS.
The motor will run if a NO momentary contact push button is press the release. the motor will stop when a NC momentary push button is press. sir tanong ko lang po kung anong pagkakaintindi nyo medyo nalilito po kase ako. salamat po sa sagot
Ahh hi Sir Anthony. Pagpindot mo kasi normally open na pushbutton continue pa rin yong flow ng current kasi may holding contact tayo. Pero pag pindot mo stop button, na interrupt yong current that is why namatay po yong motor natin.
In this video, I learnt how to use EKTS schematic diagram language to describe the DOL motor starter and the need of keeping contact. Thank you, gentleman, and may God bless you:)
Thank you sir for making this simulation video about Direct Online Motor Starter. This will help us to learn how to operate it and analyze the things that will happen if we are going to open the main circuit breaker and open the pushbuttons which give us more idea who this DOL motor starter works.
In this video I learned that how to simulate the the basic direct online motor by using the the diagram. it helps us students to easily understand by using the diagram. Thank you for this video sir
In this video i learned the how the DOL motor starter using EKTS schematic diagram words and the importance of holding contact. Thank you sir Godbless:)
Thank you for another learnings. I learn how to trip and how to fix the contactor when its trip and I learn in simulation of DOL motor starter and what is the use of holding contact and how the coil functions and turn the normally open to close and close to open. Keep it up sir thank you❤️.
Maraming salamat sir , dahil marami akong natutunan this video DOL motor start works, and especially pag nag activevate ang coil contactor, lahat ng normally open ay mag coclosed then ang normally closes mag oopen.
Salamat sa bagong video. sir ang natutunan ko sir sa holding contact kahit bitawan mo pa siya. Nag e energized parin at isa na din ang parallel connection.
Good day sir. In this video i learned how important (effective) diagram and help us student how to stimulate the basic direct online motor by using the diagram. Godbless sir
In this video,I learned the Simulation of DOL motor starter using EKTS, If we on the circuit breaker the Red and Yellow lamp will be function because the connection of Yellow and Red lamp is normally closed so if we push on the starter button the all normally open will be turn into normally closed so that the current flow in to the motor. Also i learned in diagram there have 2 circuit which is the Control System and Power Circuit.
Thank you sir for sharing your ideas ❤️
I've learned about this video, Simulation of DOL Motor Starter using EKTS, If the breaker is on, but the motor is off and the Yellow and Red is on and the Green is off, Because the holding contact are open, and then if the holding contact already close the motor is already on and the Yellow and Red will off. That's all sir, God bless and keep safe always. ❤️
Thank you sir. I learned how to simulate DOL Motor Starter using EKTS schematic diagram. Nalaman ko rin kung anong ang purpose ng holding contact in the circuit. And in this video sir I learned how to analyze what lamp will open if we open the breaker, and nalaman ko rin on how to interrupt the coil or de- energized the coil.
Thank you sir for sharing your knowledge on how to simulate the basic direct online motor starter using EKTS. In this praticular circuit or also called EKTS there is no overload relay unlike in the previous video. I learned that the moment we start the breaker the yellow lamp will on, the green lamp will off, the red lamp should be on. The moment we start the breaker the motor will not on because the connection of wires cannot proceed to the loads.
In this video sir I'v learned about the simulation of DOL motor stater by using EKTS. And the use of holding contact to the diagram and the holding contact is connected in parallel with your push botton. Thank you sir..
Goodmorning sir❤️
Done watching sir for this video Simulation of DOL motor starter using EKTS may natutunan nanaman ako bagong circuit on how it works, on how this 2 circuits the Control Circuit amd The power circuit works, i have learned that if there's same MC1 in the circuit It means it is same component it is same contactor and the moment na e on ang breaker in simulation of DOC starter using EKTS is the 2 lamps will light the yellow and red because it is conected already but green lamp will not light because the start button is normally open but when you click it the green lamp will light even if you dont hold it because of holding contacts connected in parallel circuit also the motor will activate and the two lamp yello and red will not light when you click the start button. Thanks for this video sir Godbles you and keepsafe❤️
2.Thank you for another sharing of knowlegde about electric technology sir i learned in this video is when you start the breaker kailangan tignan natin mabuti kung hindi ba sya naka normaly open. dahil kung normaly open sya hindi makaka daan yung kuryente. we make sure that the yellow lamp first is open and the red lamp also will open. and the motor is off. after that the current is can flow and the MC1 is activated. and all normaly open will going to closed and all normaly close will open. I got it sir.. thank you..
Done watching sir. In this video i learned how to simulate of the direct on line motor by using ekts and also the holding contact.
Thank you for this video sir. I learned how to simulate of the direct on-line motor by using EKTS and also the Holding contact.
Thank you sir! I learned how to simulate the DOL Motor Starter using EKTS schematic diagram. Also, I learned how holding contact work in parallel circuit.
Salamat sa another video sir natutunan ko po dito ay dapat Kung anong I off or on mo dapat Alam ko Kung saan sya gagamiton at Kung aning purpose Niya. Holding conductor din sir ay pag napindot mo Ito kahit bitawan mo pa Yung button the conductor will remain energized.
I learn in this vedio on simulation of DOL motor starter using EKTS schematic on what is the purpose of holding contact and how to put in the motor and connect in to parallel circuit , thank you sir 😊
thank u sir for your wonderfol presentation it is very important to all student to learned that using the diagram (EKTS) really help us to understand the lesson the basic direct online motor by using the the diagram. it helps us students to easily understand by using the diagram.
Good day sir!
In this video I learned about simulation of DOL motor starter, Schematic diagram is divided into two circuit a control circuit and power circuit, I learned also especially a holding contact becase current can flow and remain energized, de energized of contactor when u push a stop button. And when you start the breaker the yellow lamp is on the green off and red is on.
But when you push the strt button the current will flow to activate the mc1 coip because all of the normally open will close and the normally close will be open, the moment you push the stop button the current cannot flow so that the coil is off and all the normally close back to normally open and also the motor will stop.
Thanks for this video sir. I was able to learned that using an effective diagram really helps to understand the lesson. also i learned how holding contact work in parallel circuit.
Thankyou for this video I've learned how to simulate dol motor start using ektc schematic diagram I also found out what the purpose of holding contact is in the circuit. and this video i learned how to interrupt the coil de energized the coil.
I learned in this video is how the motor start and how to simulate the basic direct online motor using software of EKTS also i learned the important of holding contact in this diagram because it illustrates the function of it self and current can flow and remain energize when you push the stop button.
i learned for this video sir is how to simulate the basic direct online motor using software of EKTS also i learned the important of holding contact in this diagram because it illustrates the function of it self and current can flow and remain energize when you push the stop button.
Thankyou sir In this video topic helps to me to understand on how to start the motor by using holding contact, in the diagram you shown in a computer ☺️ thank you sir god blessed
Good day sir done watching i learned for this video sir is how to simulate the basic direct online motor using software of EKTS also i learned the important of holding contact in this diagram because it illustrates the function of it self anf current can flow and remain energize when you push the stop button thankyouu for this vid sir
done watching sir.I learn this video .base in the diagram how to understand to start the motor by using holding contact.thank yiu sir.
Thanks for this.lecture sir I learned of this video Using an effective diagram EKTS for me it really helps us to undertand the leacture.
I learned this video about simulation of direct online starter. In the diagram example there is not have overload relay unlike wise the in the previous discuss. Also I learn that the moment of start breaker the yellow lamp is be on and the green lamp is will be off and also the red lamp is on.
I've learned in this video what is the purpose of the holding contact and how to put on a motor
I understand how to simulate the basic direct online motor by using the diagram it helps us.
Thank you for this video sir.I learned that how to start direct online interm of it's function.And how to read the diagram from source to the motor and the two circuits the control circuit and power circuit.
Thankyou for this video sir. I learn that how to connect the holding contacts in parralel circuit. and I also know how the motor works.
thank you sir for a very good video, that how to simulate the the basic direct online motor by using the the diagram It allows you to design variety of electromechanical systems using relays, time relay buttons and motor effective diagram helps student to understand their lesson and also I learned the topic about our previous simulation
After watching the video I learned how effective diagram helps student to understand their lesson and also I learned the topic about our previous simulation. Thank you sir for sharing your knowledge.
Great video sir about the topic simulation of direct online motor starter, i learned how to wire the contactors and the function of each components which is very important to familiarize to know how to use it
Done watching ❤️. Thank you sir for Very well explained. As a student in Maritime field it is important to us to know and learned the working principle of Dol motor starter its because in the near future we possibly encounter this onboard ship. In the other side, I've learned that the simulation motor starter using EKTS is not have an overloaded relay. Hence now know that in our schematic diagram we has two parts the control circuit and power supply.
Thank you sir. The schematic diagram is divided into two,which is the control circuit and power circuit. EKTS diagrams really helps a student like us to understand more about direct online. It really helped me to understand more about holding contact.
This video sir many previous topic has been part or it and good for it sir we already know how it work and it is easy to understand *parallel circuit and holding contact
In this video, I learned how to use EKTS and the holding contact to imitate a straight on-line motor.
Done watching sir I've learned in this lesson sir the purpose of holding contact kahit bitawan mo yung push botton the contactor will still energize it will stop only when you press stop button. And important to understand the diagram.
In this video I learned that how to simulate the the basic direct online motor by using the the diagram. And the Schematic diagram is divided into two circuit. That's all thank you sir❤️
I learn in the video on how to simulate the basic direct online motor using the diagram. The schematic diagrams shown that it is divided into two. Thanks sir
Good eves sir done watching sir i learned in this topic is the basic parts and what is there purpose, also this circuit have holding contact so that the flow of current is stable untel you press the normally close push button switch. That all i learned sir thanks and Godbless you, advance merry Christmas sir 🎊🎊🎉🎉
Good Day sir. In this video i have learned about,how important holding contact in this diagram because it illustrates the function of it self, and also the thermal over load relay even though wala siya sa diagram na ipinakita sa video na ito, pero from previous video we can identify it's funtion and significance.
Thanks for this video sir. I was able to learned that using an effective diagram (EKTS) really help the students to understand the lesson . In this video also shows the combination of the previous simulation(holding contact ,interlock, series and parallel).
Done watching video sir I've learned if the contactor is energize the motor is on and grn is on but the yl and RD is off because all MC1 is energize
Good morning sir..thanks for another video that you shared with us sir.
I learned about the topic simulation of (DOL) Motor starter using EKTS. With a schematic diagram is divided into two circuit a control circuit and power circuit.this simulation shown of what is the the flow of each line using operation that in turning on the breakers or RST supply.but when you push the starter button the current Will Flow to activate the mc1 coil. That's it sir thanks.
in this video, I've learned what is the purpose of the holding contact and how to put on a motor.
In this video, I properly understand the purpose of holding contact even though you release the push button, the contactor will still energize it will stop only when you press stop button. And I also learned Schematic diagram is divided into two circuit.
I learned about the simulation of DOL motor starter using EKTS. This lesson is mostly similar to the topic of holding contacts that has been discussed lately but there are some components that has been added to the circuit diagram. As same as to the holding tanks, when the coil is being activated, all normally open will close and all normally close will open. In order to de-energized the contactor, put a stop button to interrupt the current if necessary.
i learned in this video is how to start the DOL. and control circuit and power cercuit.
Thanks for this video sir. I was able to learnt that using an effective diagram (EKTS) really help the students to understand the lesson . In this video also shows the combination of the previous simulation(holding contact ,interlock, series and parallel).Keep safe sir.🌻😇
I learned in this video is how the motor start , when the breaker will start only without pushing the start button the motor will not start but when you start the breaker & push the button the motor will also start and all the MC1 that normally close will open/all the normally open will close .
By watching this video, I learned that the schematic diagram video is divided into 2, the control circuit and the power circuit. It allows you to design variety of electromechanical systems using relays, time relays, buttons, motors, switches and some basic mechanical systems.
Thank you sir, for sharing ideas about how simulation motor start by using EkTs, if you switch on the breaker the holding contact Mc1 will push the start button the. Motor will also on, tsaka. Na on narin yung green light
I learned the importance of holding contact and the parallel connections
This video I learned about how to connect the holding contact in paralle. Also how the motor work.
In this video, I learned some uses of parts, especially the holding contact. The porpose of holding contact is whenever you unhold the pust button,the contactor will still energized.l,and it will stop only when we press the stop button.
I learned that how to simulate the the basic direct online motor by using the the diagram.
What i understand in this topic is the uses of holding contact normally open contacts that provide a path for current to the coil which operates them.
Good day sir. EKTS motor control circuit simulator allows building custom motor circuits using different motor types, including single and three phase motors, in different quantities.
video air many previous topic has been part or it good for it sir we already know how it work and it is easy to understand parallel circuit and holding contract.
I learned the simulation of a direct online motor starter. In the diagram there is no overload relay, In the control circuit there are the components of coil, contactor, holding contactor, lamps and buttons. The power circuit compose of the motor and normally open contactors.
i learn that a DOL starter (also known as a direct on line starter or across the line starter) is a method of starting a 3 phase induction motor. In a DOL Starter, an induction motor is connected directly across its 3-phase supply, and the DOL starter applies the full line voltage to the motor terminals.
I learned that a direct online starter consists of two buttons, a GREEN button for starting and a RED for stopping purpose of the motor. The DOL starter comprises an MCCB or circuit breaker, contactor and an overload relay for protection. These two buttons, i.e. Green and Red or start and stop buttons control the contacts.
thank you sir..
In this lecture Ive learn how to start the Direct online starter using the software of EKTS and also We discuss the components of the DOL the EKTS does not have an Overload relay. Also In the schematic Diagram we have to parts the Control and Power Circuit. Also in this Lecture we use an Parallel to use the holding contacts in the simulation in the EKTS we found that in Turning On the breaker or RST supply Our Coil does not energize because of the Push button Start the both lamps Red and Yellow is On while the green is off it because our coil does not energize, When we click the star push button it Hold our push button in t normally close thats why the Coil is energize now and the all MC1 will flow the current because of all normally open will close and the normally close will open and our motor is On , Stay safe and GOD bless
In this video I learned the simulation of a direct online motor starter. In the diagram there is no overload relay unlike the previous discussion. In the control circuit there are the components of coil, contactor, holding contactor, lamps and buttons l. On the other side the power circuit compose of the motor and normally open contactors.
Good Day Sir! This circuit have holding contact so that the flow of current is stable until you press the normally close push button switch. With a schematic diagram is divided into two circuit a control circuit and power circuit this simulation shown of what is the flow of each line using operation.Thank You!
EKTS is a motor control simulation software for designing Electromechanical Systems. It allows you to design variety of electromechanical systems using relays, time relays, buttons, motors, switches and some basic mechanical systems.
This latest v-lecture I've taught the topiv simulation of DOL motor starter using EKTS this method we xan easily understand how will it works.
In this video, I've understand how important holding contact in this diagram because it illustrates the function of it self and to simulate the basic direct online motor using software of EKTS.
Good morning sir Louie, I just want to ask if this software can be applied to pump controls, refrigeration and vfd ? Thanks for your reply?
Sir! what about the Direct-On-Line (DOL) motor starter with indicator and Jog function? ask lng po?
After you start the machine is it always ON the yellow light?
The motor will run if a NO momentary contact push button is press the release. the motor will stop when a NC momentary push button is press. sir tanong ko lang po kung anong pagkakaintindi nyo medyo nalilito po kase ako. salamat po sa sagot
Ahh hi Sir Anthony. Pagpindot mo kasi normally open na pushbutton continue pa rin yong flow ng current kasi may holding contact tayo. Pero pag pindot mo stop button, na interrupt yong current that is why namatay po yong motor natin.