ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

Installing a KOHLER skirted toilet 🚽 💦

แชร์
ฝัง
  • เผยแพร่เมื่อ 6 มิ.ย. 2023

ความคิดเห็น • 61

  • @boobles3476
    @boobles3476 ปีที่แล้ว +26

    leave it to kohler to make it ultra complex always

  • @ryanfrizz
    @ryanfrizz ปีที่แล้ว +10

    Those toilets are so damn heavy and overly complex lol, hate them. That milwaukee lantern is sick though I have one too.
    Never thought of soaking the wax ring in warm water that’s pretty slick

    • @theplumberlorian
      @theplumberlorian  ปีที่แล้ว

      Yes sir!

    • @mccroneplumbing1207
      @mccroneplumbing1207 ปีที่แล้ว

      I gotta ask as a plumber, don't want to say master plumber of 38 yrs and I'm only 59, but why woukd u put a wax seal in warm water, if we go to do a finish tell the kids in the winter put a floor register cause gonna be a couple before we start installing fixtures
      Never seen the need or had a problem, installed atkewr 10000 toilets
      Don't believe everything you see here

  • @derekmichael9375
    @derekmichael9375 16 วันที่ผ่านมา

    That notch in the baseboard 😂 I’ve been there, the right thing to do would be to move the flange out, but the customer doesn’t always want to pay that kind of money. Don’t tell me you left that stop either 😂 nice vid

  • @austinc4922
    @austinc4922 15 วันที่ผ่านมา

    After installing the side bolts to the fling with the toilet on. Is it ok for the toilet to STILL be able to be moving around because it doesn't seem secured

  • @tamaraespinosa1
    @tamaraespinosa1 3 หลายเดือนก่อน

    Using this video and instructions, just installed one. Did have to cut the bolt size down. Thanks for the visuals!

  • @johnhejl6719
    @johnhejl6719 ปีที่แล้ว +3

    Installed one years ago when I was first learning. Definitely not as bad as I thought.

  • @williamrudny8580
    @williamrudny8580 ปีที่แล้ว +4

    Never installed one of those, heard they are very difficult but that didn't look too bad. My issue is the toilet doesn't seem "tight/snug" to the floor.

    • @trdjody
      @trdjody ปีที่แล้ว

      Floor/tile uneven

    • @theplumberlorian
      @theplumberlorian  ปีที่แล้ว

      I’m not a fan of them honestly

    • @mccroneplumbing1207
      @mccroneplumbing1207 ปีที่แล้ว

      Its actually easy, specially for a professional

    • @ricklee827
      @ricklee827 ปีที่แล้ว +1

      Seal around the toilet after you install a it'll be alright

  • @timc1341
    @timc1341 25 วันที่ผ่านมา

    Installed my first one today.
    Customer supplied and i didnt realize it was skirted until arrival.
    Customer was a nice guy but he wanted to watch the whole time as i deciphered the directions....fun stuff.
    These toilets are stupid. Installation wasnt so terrible but its honestly just Karen appeasing technology because it looks slightly better. No functional benefit whatsoever.

  • @LearnPlumbing
    @LearnPlumbing 8 หลายเดือนก่อน

    I feel it slows the low flush toilet just a little causing the occasional misfire. I do t like the flush water has to leave the smooth porcelain trap way and enter the plastic double offset before entering the drainage system.

  • @Seven7Pain1
    @Seven7Pain1 ปีที่แล้ว +3

    lol during winter i have to do that to wax rings

  • @jayson8hampton
    @jayson8hampton 3 หลายเดือนก่อน

    I put my first one in last week, and had to cut the 1/4 round too. Pain in the butt if you have to change a wax ring down the road and heavy too. Looks good though lol

  • @9MMSWORD
    @9MMSWORD 2 หลายเดือนก่อน

    That tp roll in an awkward location though

  • @bernardzsikla5640
    @bernardzsikla5640 ปีที่แล้ว +4

    Did you soak the wax ring to warm it and soften it??

    • @jondoe4807
      @jondoe4807 ปีที่แล้ว +2

      Yes I have to do it in the winter

    • @iricharddrake1692
      @iricharddrake1692 ปีที่แล้ว

      Real question why didn’t you use an offset flange instead of cutting their baseboard trim

    • @misterbuddyboy
      @misterbuddyboy ปีที่แล้ว +2

      Never thought of that I always put them in the microwave thanks for the tip

    • @jondoe4807
      @jondoe4807 ปีที่แล้ว

      @@misterbuddyboy 😂

    • @misterbuddyboy
      @misterbuddyboy ปีที่แล้ว +1

      @@iricharddrake1692 an offset flange is only used to offset away from something like a joist, and on the installation of the piping system not on the finish those toilets are longer for some reason in the back, that's why he cut the trim, by the way I'm not a big fan of those toilets

  • @DR-um2bv
    @DR-um2bv 6 หลายเดือนก่อน

    How is that plastic part and those screws nut thingamajig gonna hold up especially if have and you have to remove it. Or snake it out ro plunge it and it leaks where the 2 pieces come together under skirt.

  • @mikehennessy1865
    @mikehennessy1865 3 หลายเดือนก่อน

    Anyone else have the cam strip out on installation?

  • @garyglenn3654
    @garyglenn3654 6 หลายเดือนก่อน

    We just installed a Kohler Gleam. MUCH easier than I anticipated.

  • @mariosifuentes5994
    @mariosifuentes5994 ปีที่แล้ว +1

    Because is skirted often the supply line is on the way , be aware of that . Also kholer don’t have “standard “ parts if you need to replace something , you struggle to find the tigh one out of the ,for example ,509 different flapers they have 😂 in short kholer is bs , also toto

    • @theplumberlorian
      @theplumberlorian  ปีที่แล้ว +1

      Oh yeah Kohler loves to control the parts, you can’t just go to HD and get it

    • @mccroneplumbing1207
      @mccroneplumbing1207 ปีที่แล้ว +1

      That's hilarious, I always ask the client when they give this shit to install, did u order replacement parts for the future, they clueslessly ask why, n I tell them home department don't sell these parts nor does lowes
      But pay me 145$ to go shopping, lol cause that's the hourly rate whether we driving, working, or shopping for u
      Buy moen, riobell, delta atleast, or all that money u think your saving, u gonna pay me to replace in less 10 yrs

  • @johnbudnick6484
    @johnbudnick6484 ปีที่แล้ว +1

    Yeah I hate installing those toilets. Big pain

  • @radondar9230
    @radondar9230 8 หลายเดือนก่อน

    Nothing like a smaller hole to plug up after enchilada party

  • @trdjody
    @trdjody ปีที่แล้ว +1

    I hate installing these 😂 at least your floor was level!?

  • @mccroneplumbing1207
    @mccroneplumbing1207 ปีที่แล้ว

    Actually not that completed at all, as a plumbing contractor for 38 pretty successful years, watching my kids see how easy it is, makes me laugh
    Just looks intimidating

    • @theplumberlorian
      @theplumberlorian  ปีที่แล้ว

      Just way too many unnecessary steps and the fact that you cant see the bolts when setting I’m not a fan of

  • @albertosierra3478
    @albertosierra3478 9 หลายเดือนก่อน

    No water supply need it😅😅😅😅😅😅😅can you believe it 😅😅😅😅😅😅😅😅

  • @Jubileejones
    @Jubileejones 10 หลายเดือนก่อน

    I can't get the tank on!

  • @tenthdimension9836
    @tenthdimension9836 ปีที่แล้ว

    Wow you seem to have removed a lot more of the trim then you needed to.

  • @iversonjcameron
    @iversonjcameron ปีที่แล้ว

    Nice.....but why

  • @lonniehill83
    @lonniehill83 ปีที่แล้ว

    It CAN'T BE THAT easy 😅

  • @alexcorona
    @alexcorona ปีที่แล้ว

    Leaving the trim unfinished like that is not professional at all, would expect this from a backyard mechanic not you….

    • @theplumberlorian
      @theplumberlorian  ปีที่แล้ว

      The customer supplied toilet wouldn’t fit .. guy told me to make it fit, which cutting the trim was the only option .. it should have been a 10 inch rough fixture

  • @garrettwalker2415
    @garrettwalker2415 8 หลายเดือนก่อน

    whoever buys these want to watch the world burn. just buy a regular toilet.

  • @snappybabby4646
    @snappybabby4646 ปีที่แล้ว +1

    i prefer my toilet wear something more revealing.

  • @markd9105
    @markd9105 ปีที่แล้ว

    How about a pants one😅

  • @kemojammeh5418
    @kemojammeh5418 ปีที่แล้ว

    Lovedy how are you?