The RC Genius | How To Easily Replace A Metal U-Joint On A RC Car
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Today I do yet another How-To video. I show you how to easily replace/install a Metal U-Joint on any RC Car. Thanks for watching, please like and subscribe. See ya next time!
Thanks man, I was stumped on this one until I saw your video!
Glad I could help!
Perfect! Good video! Helped me replace mine! 👍
Dude, thanks for this tip! It worked and saved me money since my local hobby store tried to convince me that I would need to purchase new differential axles
Worked excellent!!
I couldn’t see how to do it any better 👍
Sauer Power awesome! Glad you found it helpful!! Thanks for watching 👍
May God bless you and your family. Thanks so much for this. I was struggling bad!
Thank you for the help. Works every time
Great video. Just what I was looking for because I needed to do this. Worked great and no stress on those arm tabs. Thanks!
Dave Robbie I’m glad it worked! Thanks for watching, and glad I could help ;)
Wow dude, you are underrated. I hope you become more popular soon!
Nice, very helpful on my slash 👍🏼
Dude you are the man ! I had mine slip on me I’m glad I found your video it’s a definitely a good reference to how to fix it with out buying anything
spot on, useful information! SUBSCRIBED!
Great video keep up the good work.
That was simply GREAT! I've replaced these before, but your method is the way to go.
If you are fixing axles like this you are doing it the hard way. :) I'm posting a video on my channel today "Do you know what this is for?" or something like that. You'll see and wonder why you were wedging screwdrivers in all this time. I've done it that way before.. using the proper tool is way easier.
Netcruzer RC TECH CARS well thank you for the info! I’ve done this method for a while now, so it’s not much of a burden to me, but knowing there’s another option is great! Thanks a lot buddy!
I just posted the video on my channel. See how easy it can be to fix these axles!
Excellent! Thank you. I couldn't have done it without your video.
Awesome how to!! Couldn’t find this anywhere else so you saved me! Detailed explanations helped!
Glad to hear it!
Thanks so much worked perfect for my ecx amp
Thank you so much
Gurra Kungariket your welcome!
Thanks for the tip it just wore down and broke on my 2wd slash and I didn't know how to replace it good work keep it up dude
No problem! Very glad you found it helpful! Thank you!
what about metal ones? and yes even metal ones wear down pretty fast
The proper way to introduce a diy help video. Finally someone gets it. SUBSCRIBED 😅
Thank You very very Much. I am new to all of this, and I was wrestling with this ball joint issue for like 45 min.almost wanting to toss the whole damn thing lol. Your way literally took me 20 seconds, in which 10 sec of it was trying to find a screw driver wide enough haha.
You're very welcome! I'm glad I was able to help! Thanks for watching ;)
@@TheRCGenius btw, in your experience what is a good shock set for the Traxxas Classic 2.5? I do alot of off road jumps and I have a feeling the stock ones wont last. That's how I broke the drive shaft and shock tower to pieces.
@@arod7130 I would suggest looking online or in a hobby shop for shocks that fit your truck. Personally, I think that whatever you decide on, you should try to get some that have threaded collars. This allows for easy softening or stiffening of the shocks. Aluminum is nice too, adds durability and good looks! Integy, Pro-Line, or Helion are a variety of brands I currently use on my rigs. Check out some of my recent videos, (mostly the cinematic edits) and you can see how those shocks perform in slo-mo. Hope this helps!
Thanks for the guide, however if you buy drive shafts that are completely broken down, when you’re connecting the u joint to the large half of the drive shaft, slide one end in, then push the other end against a table or wall using your weight and it slides in pretty easily.
I was very stuck i have tried this for 1hour and then i saw this video and i was like lets watch it then i tried to put stub axle on it and now im thankful
thanks brotha much needed help i have so many spares drave shafts because thats the only part that breaks but u get more for less so thanks again!
my Shafts always pop out of the u joins anybody has a solution (sorry for my english)
this worked on my traxxas villain u joint as well thank you bro
I've done this and for some reason the joint keeps popping right back out what can I do to fix this
RC MANIAC if it keeps popping out, you’ve likely worn the mounting holes on the half shaft to the point that the joint can easily work its way back out. I would recommend replacing the half shaft or output yoke, and then connect the u-joint back in.
@@TheRCGenius well I tried new ones to maybe my driving style requires steel shafts ig it's time for an upgrade good video though I subbed
RC MANIAC ok, well upgrades are a good idea. As far as driving style, try to focus on when you land from doing jumps. If the wheels aren’t spinning fast/slow enough (depending on speed of the truck), when it lands it sends the axles into shock from the speed change when it hits the ground. I would recommend slowly tapping the throttle when in the air to keep the wheels turning at a decent speed. Thanks for the sub 😉
Mine is detached from the chassis, is there any way to put it back in
but how can i remove them?
Suur Paks Kass simply reverse the process. Use a flat screwdriver to open the ends, and wiggle the u-joint out.
this helped me out so much, your content is great keep it up
This technique is amazing thank you
So I use a 3s Lipo in my rusty vxl and I am destroying my u joints do you know any durable and maybe metal u joints
Well the U-joint itself is metal. If you're breaking driveshafts, I believe there are some aluminum upgrades. I would try looking at Integy, They make a good selection of aluminum RC Parts.
This guy deserved the like & sub
I was little worried how I was going to pull that off but this technique worked perfectly. Thank you!
Brian Berry you’re very welcome! Glad it was useful for you...thanks for watching! 👊
how to get the u joint inside of the half shaft?
Thank you
I used your method on my Tmaxx
That was genius! It worked so good even with putting the output yoke on witnout the axle.. Subscribed for more, thanks
Johnnie Vangilder your welcome! Glad it worked! Thanks for watching 👌😁
Excellent tutorial my man!
Helped me allot, thanx 💪😎
you saved me a lot of trouble buddy!!!
Glad to hear that!
thank you sooooooooo much life saver man! Thanks for the step by step!
Glad it helped!
Thanks so much for this!
Thank you 🙏
Works great!!
What if there’s no plastic around the metal axle thing, I’m trying to fix my rc car at the moment
If the plastic tabs on the driveshaft is broken, then you will need to purchase a new plastic axle. They are cheap, and will get back up and running 👍
The rc car came without the plastic
Thanks man. Great video. I was scared I was going to break it before watching your video.
Mine keep popping out while driving. Cannot figure out what’s going on. I’ve replaced multiple times. It’s actually a lot easier than you explain here too.
There are several factors that could lead to that. If you aren’t keeping your wheel speed consistent when doing jumps, you can send the driveshafts into shock. Basically, if the speed of the driveshafts spinning changes drastically, it can disconnect from the U-joint. If you are running brushless or high speeds, you may want to consider aluminum upgrades.
@@TheRCGenius I haven’t even gotten a full battery through it yet and I’ve gone through 4 u joints. Haven’t gone over a single jump. Just been doing parking lots, dirt, little bit of mud testing it out. Had it for 2 weeks today.
I have been playing around with suspension and wheel angle I was running a slight camber and had suspension as stiff as I could. I have leveled all that back down to normal took in the camber a bit. About to test it again.
(Ps. It is only the rear u joints for me and that is where I had the stiff’est suspension setup)
I would suggest looking at upgrades. If you’re running LiPo and brushless systems, that can be enough power and torque to cause your issues. Look at aluminum upgrades from Integy, or any other seller that makes parts for your rig.
this video should come with everyones first RC car.. super helpful
awesome video bro
Pepijn Grutterink thank you!
Can the u joint make the car squeaky
Rc Goodness it shouldn’t, no. If there’s squeaking, it’s most likely coming the motor, wheel bearings, or maybe the gears in the transmission. I would recommend inspecting those areas, and seeing if any of them look warn, or need replacing, if you think it’s the cause of the issue. Before replacing though, try adding some grease or lubricant to aid the squeak. Hope this helps!
Just what I needed to know. Appreciate it
That part just broke my friends car
Brady Sowerbutts haha! Yeah it is a weak point. Thanks for stopping by ;)
How do you do this when the u joint not attached to the first piece?
sora bishop in that case you just have to force it in place. It won’t break, but unfortunately that’s the only way to do it.