This is probably more exciting work than it may seem. You never know what is in that jungle until you hit it; foundations of old buildings, discarded kitchen stoves, automobile wheels, etc.
Holy cow, what an awesome machine !. I've never seen one of these before, it even turned some decent sized trees into sawdust !. What a performance, would have loved to had one of those back on the farm years ago, thanks for sharing !.
That is a great looking machine and it cleans land easily those who need new land cleared should have one to do the work of bulldozers and tractors together.
What the hell is with all the 'you're rough on your machine' comments? This looks like average brush-clearing treatment for ANY Bobcat-Loader in the U.S.!!! If you don't drive your machine like this, on average, you are BABYING JUNK MACHINERY! Which, then, begs the question - if you ran it like this as an attachment ALL THE TIME on, say, a 90-hp REAL crawler, what would it's life expectancy REALLY be?
watch?v=JD1uLH_64Qc for the attachment I'm comparing this to (which, happens to be mounted on a 92-hp diesel Bobcat) - the video talks about 'forestry mulcher component replacement costs and required hardware', compared to 'whole machine' which actually costs a LOT MORE and is usually prohibitive to 'most businesses'.
I would have to agree. Not terribly smooth on the controls, but using the machine for what it was designed and built for. It is a machine, and it is designed to do work.
You operate a machine long enough and your personality and frame of mind start coming out in the way you operate. He had a load of work to do here so if he's pushing to get the job done then I can live with that. They are tough as fuck and can take a hammering these machines.
The child in the background is delighted and trying to do "commentary" about this brush grinding machine.Meamirizing to watch this work.would be neat to try one of these just once!
If there is no fence around the property , cut a fence row , then put goats inside of it. I fenced in 3 acres, put goats in, 4 weeks later it was clean. Then I reseeded it with pasture grasses .
Nick W, how many goats did it take to clear the 3 acres? I've seen some of the videos of herds of goats clearing land and they're very effective. However after the goats cleared the vines, leaves, and grass you would still have trees, stumps, logs and sticks to contend with. I'm voting for the machine!!
They can clean up brush if given enough time. I like goats almost as much as my Kubota zd28. tTHEY ARE VERY COST EFFECTIVE! YOU HARDLY EVER HAVE TO GREASE THEM. Give goats a chance.
It's not the operators fault guys its just that there should be a draft flow on the speed of the up an down an who knows that machine mite not even have one other than that he is doing a jam up job so just gas on it brother run it hard or go home run it till it blows up or breaks which ever come first .
If you don't know what is behind all the brush, and there could be large rocks, a metal pole etc inside of it, how can you clear it without taking the risk of damaging your equipment?
these things are perfect for light/med duty farm grade crawlers no ripper (the most power intensive application a dozer/crawler will do) Just a winch and a pintle, again farm stuff. This is not a cat d series or even a JD or case and it's not trying to be. This machine is filling the gap between a small skid-steer and a full size crawler dozer. The maneuverability and quickness of this are quicker like a wheeled vehicle but with the stability and traction of a crawler. I would think front implements like the brush grinder and maybe a loader are avail along with a blade as options without having to buy a blade first. This would be awesome for pulling a 5000 gal spray trailer to prep and feed a field before planting. And for you people saying it's under powered, any high volume hydraulic device will cause the engine to do that. My old JD back hoe would do that with a breaker on in place of the bucket when I turned it on and off, regardless of load
Yes, there are bigger more expensive machines that cost more to run and do a coarser job. I have several sizes of hammers and screwdrivers. Pick the one for the job you want to do, at a price point you can afford.
Light Ning I don't believe there is a "skid steer" out there that has the hydraulic cap. to run any equip like this , I used to work on hydroaxes , and even their capacity was a little on the low side in my opinion , if you didn't sample the oil and stick to the maint schedule you were in trouble , a qualified operator was a must .Not something you put in the hands of the average farmer.
You make it look harder than it could have been instead of going from side to side you could have just driven into the brush backwards and forwards like you did halfway through it
To be honest I suspect there are better machines for taking care of latanea and regrowth, this one does not mulch the stump in the ground. Just the same this is tough work for any machine and may just be the case of less speed more haste, would be good to see it in the hills. Looks like this was working in a mango plantation in North Queensland ?
Mike Baxter , back when I was a kid , my dad just gave me a blunt penknife to clear 5 to 6 acres and only come home when the job was done . Life was hard but I enjoyed it . 😉
Mike labushesky it turns to dust along with a 100$ bill for the carbide cutter tooth you possibly wrecked. That’s if your lucky and maybe only nick one. (Unlikely).
Heavy Equipment. If you don't know what is behind all the brush, and there could be large rocks inside of it, how can you clear it without taking the risk of damaging your equipment?
I think the word "amazing" is a touch of an exaggeration. If this was being driven 'hard' at a demo, why not drive it at the speed it is designed for, otherwise some people will think you can drive it like this all the time. So what is it's "recommended" speed.?
The brush and trees look a lot like a staghorn sumac colony. If so, it will grow right back, and with a vengeance (due to its rhizome root system)... very tough to eradicate (to remove or destroy utterly; extirpate / to pull up by the roots - ref. dictionary.com).
Yeh! A lot of this is Lantana. Very prolific in Qld in certain areas and Yes! It does come back...bad. spray it, Dig the roots out...burn the stuff and it will re appear. Takes awhile to rid your property of this shit if you don't follow up on it.
I enjoyed watching this machine working. I hope I have one of this to clean our neighborhood.
Why do I enjoy these videos so much!? I can’t get enough.
Because you're lazy and you like to watch other people work
Instead of getting up and doing something yourself.
That's why.
This is probably more exciting work than it may seem. You never know what is in that jungle until you hit it; foundations of old buildings, discarded kitchen stoves, automobile wheels, etc.
A quick scout with a wheelbarrow will save hundreds if not thousands of dollars in teeth bits
Excellent upload. Full watched and have a wonderful day....
It does outstanding work and it doesn't mess around that high monster gets the job done
Holy cow, what an awesome machine !. I've never seen one of these before, it even turned some decent sized trees into sawdust !. What a performance, would have loved to had one of those back on the farm years ago, thanks for sharing !.
Amazing machine in the right hands.
Wow this machine is a little Monster . Love it ....
Best shred performance I have seen other than Seppi equipment...
Man I love watching that machine work,,❤️
That's AWESOME! THANKS FOR SHARING! AMAZING JOB!♡♡♡
That thing takes no prisoners!
One Beast of a Machine
I can watch this all day.
Nicely done!
That is a great looking machine and it cleans land easily those who need new land cleared should have one to do the work of bulldozers and tractors together.
What the hell is with all the 'you're rough on your machine' comments? This looks like average brush-clearing treatment for ANY Bobcat-Loader in the U.S.!!! If you don't drive your machine like this, on average, you are BABYING JUNK MACHINERY! Which, then, begs the question - if you ran it like this as an attachment ALL THE TIME on, say, a 90-hp REAL crawler, what would it's life expectancy REALLY be?
watch?v=JD1uLH_64Qc for the attachment I'm comparing this to (which, happens to be mounted on a 92-hp diesel Bobcat) - the video talks about 'forestry mulcher component replacement costs and required hardware', compared to 'whole machine' which actually costs a LOT MORE and is usually prohibitive to 'most businesses'.
I'm in Awe...That thing is a beast !!
Super cool hard working machine . gotta be expensive to do that kind of work .
I would have to agree. Not terribly smooth on the controls, but using the machine for what it was designed and built for. It is a machine, and it is designed to do work.
You operate a machine long enough and your personality and frame of mind start coming out in the way you operate. He had a load of work to do here so if he's pushing to get the job done then I can live with that. They are tough as fuck and can take a hammering these machines.
It’d be nice to know something about the machine. Hp.,weight, make, $$$ lots of questions. That thing is amazing.
what happened? did someone plant 3 - 4 mulberry bushes there 5 years ago and forget them?
Oh and awesome machine I love it!
The child in the background is delighted and trying to do "commentary" about this brush grinding machine.Meamirizing to watch this work.would be neat to try one of these just once!
But he is annoying
Great video. Thank you for sharing….
Equipamento excelente para roçar Mato em propriedade rural. Parabéns pelo vídeo.
And behold! So many mature Lychee trees amongst the lantana 👍😃
Sure wish I had a use for one of these !
it does look fun dont it lol
Pretty sweet. Only problem with using this around my place, is you would need to wear a full bee suit.
It has a fully enclosed “sealed” cab with AC and fully filtered air. Mr. bee might get sucked into the air filter but he wouldn’t get into the cab.
If there is no fence around the property , cut a fence row , then put goats inside of it. I fenced in 3 acres, put goats in, 4 weeks later it was clean. Then I reseeded it with pasture grasses .
*Goats are Frigging Worthless Critters!!*
Sure !!!!!!
Nick W, how many goats did it take to clear the 3 acres? I've seen some of the videos of herds of goats clearing land and they're very effective.
However after the goats cleared the vines, leaves, and grass you would still have trees, stumps, logs and sticks to contend with. I'm voting for the machine!!
They can clean up brush if given enough time. I like goats almost as much as my Kubota zd28. tTHEY ARE VERY COST EFFECTIVE! YOU HARDLY EVER HAVE TO GREASE THEM. Give goats a chance.
Just follow the goats with the machine and you will have a great looking project done much more quickly.
It's not the operators fault guys its just that there should be a draft flow on the speed of the up an down an who knows that machine mite not even have one other than that he is doing a jam up job so just gas on it brother run it hard or go home run it till it blows up or breaks which ever come first .
holy grinders bat man !!! that baby makes short work of all that mess haha
I'm guessing South East Qld somewhere with that amount of Lantana.
That's a ground clearing machine, and I've seen the time I would liked to have had one!
If you don't know what is behind all the brush, and there could be large rocks, a metal pole etc inside of it, how can you clear it without taking the risk of damaging your equipment?
Great job!!! Can I have the cost of this machine pls?
Klamath falls Oregon is watching
these things are perfect for light/med duty farm grade crawlers no ripper (the most power intensive application a dozer/crawler will do) Just a winch and a pintle, again farm stuff. This is not a cat d series or even a JD or case and it's not trying to be. This machine is filling the gap between a small skid-steer and a full size crawler dozer. The maneuverability and quickness of this are quicker like a wheeled vehicle but with the stability and traction of a crawler. I would think front implements like the brush grinder and maybe a loader are avail along with a blade as options without having to buy a blade first. This would be awesome for pulling a 5000 gal spray trailer to prep and feed a field before planting. And for you people saying it's under powered, any high volume hydraulic device will cause the engine to do that. My old JD back hoe would do that with a breaker on in place of the bucket when I turned it on and off, regardless of load
This is a dedicated forest mulcher. It shouldn't even be compared to a dozer. It's basically a skid steer on steroids.
Good job man,i like you skill...so amazing,
Yes, there are bigger more expensive machines that cost more to run and do a coarser job.
I have several sizes of hammers and screwdrivers. Pick the one for the job you want to do, at a price point you can afford.
Does this rule apply to goats too?
@@tallen4520
Bwahahaha.
Relaxing and enjoying
ok bushes is gone and what to do with all that roots ?
Amazing machine, I need that one urgently, please send me a quotation
Great job..... WOW
If you hired a local to clear this lot with this machine, how much would you be paying per hour?
$3000/acre.
It does seem like stuff is pushed ahead of this unit before it gets ground up.
Thats how u work that machine thru light material like bushes.... Even faster w8th a disc mulcher
Just for hahas what does a machine like that cost?
Had me reaching for my hearing protection.
Perfect tools👏👏
200k +? machine and no back up alarm?
Definitely more productive than a skid steer with attachment.
Light Ning I don't believe there is a "skid steer" out there that has the hydraulic cap. to run any equip like this , I used to work on hydroaxes , and even their capacity was a little on the low side in my opinion , if you didn't sample the oil and stick to the maint schedule you were in trouble , a qualified operator was a must .Not something you put in the hands of the average farmer.
Half a million vs. $130k. I’ve got a guy doing some mulching for me, got a Takeuchi TL12 with a 72” Fecon. He can make it sing!
Nice job
You make it look harder than it could have been instead of going from side to side you could have just driven into the brush backwards and forwards like you did halfway through it
I use to work where this was made. They made a much larger one than this.
alanshadyvally Wooster Ohio
To be honest I suspect there are better machines for taking care of latanea and regrowth, this one does not mulch the stump in the ground. Just the same this is tough work for any machine and may just be the case of less speed more haste, would be good to see it in the hills. Looks like this was working in a mango plantation in North Queensland ?
Great machine but how do you tell if there is any big rocks in front of you so not to damage cutter
What is the price and how much horsepower.
Which compani machine which model...
Gostei quando começar a brotar faz a aplicação de Tordon pois so tem folha larga
It's so sad to see the trees taken too.
Buenas noches como se llama esa maquina y donde puedo comprar una igual
Saludos de Guatemala
look like this land was over due for some cleaning
how much if i want to buy this mechine....want to clean rubber garden...
Give that man a Bells and some Diesel
Look at all these critics
Do y'all hear the little kid in the background? He is so amaze about what's going on it is to cute
Rand Paul's new lawnmower.
*Yeah and he could have taken out the Neighbor with it too!!*
When I was younger I could clear 2 or 3 acres a day with nothing but a machete and a small chain saw ... and save all the poles and firewood. :)
Mike Baxter , back when I was a kid , my dad just gave me a blunt penknife to clear 5 to 6 acres and only come home when the job was done . Life was hard but I enjoyed it . 😉
What happens when a sizable rock gets sucked in to the cutting area ?
Mike labushesky it turns to dust along with a 100$ bill for the carbide cutter tooth you possibly wrecked. That’s if your lucky and maybe only nick one. (Unlikely).
Heavy Equipment. If you don't know what is behind all the brush, and there could be large rocks inside of it, how can you clear it without taking the risk of damaging your equipment?
Ahh Christmas present
Where the hell stands this king of vegetation?
where can i rent one
No organization remains the plot as a battlefield...
*Works alot better that trying to use a Brush Hog on a tractor and that thing even eats trees where a Brush Hog Won't*
ron dill xnxx
A hydroaxe will suck in and shatter a ten inch softwood tree.
@@beckywatt5048 what's a hydroaxe?
It's a Shame that You Don't have a Bigger Machine. You Can't Have Enough Power for the Outback Deep in the Bush Mate.
one of these days i will see one of these that is strong enough to mow bushes and not have to back up and back 4 times ----
It could use 100 more HP, bigger pump and heavier drum.
PT600 mulcher
Galotrax 800
That has nothing to do with the strength of the machine, dumbass. That's how the head re processes the material for a finer finished product.
Avoid backing by going forward and round and round.....except with goats.
I think the word "amazing" is a touch of an exaggeration. If this was being driven 'hard' at a demo, why not drive it at the speed it is designed for, otherwise some people will think you can drive it like this all the time. So what is it's "recommended" speed.?
Destroying the invironment.
The brush and trees look a lot like a staghorn sumac colony. If so, it will grow right back, and with a vengeance (due to its rhizome root system)... very tough to eradicate (to remove or destroy utterly; extirpate / to pull up by the roots - ref. dictionary.com).
*
Bruce Beverly
irradiate/eradicate
@@dunruden9720 - I didn't write "irradiate," which is "to shed rays of light upon; illuminate."
That is some muncher
How many animals were killed ......
Pense num trem bão pra acabar com juquira.
Dekat mana blh dpt mesin
Quanto custa uma máquina desta ser possível a resposta em português por favor
I'm not sure what the selling price was, someone else might know.
Alot of wild life never got the chance to get out.
Wouldn't you be more effective running in circles thus eliminating all of that backing up?
Royce Anderson it's a hydro ax that's how the job is done back and forth...
Don't why but I need that lol
Well ! Go ! And BUY ! ONE !! THEN !!
I would hate to see what the cost of operation is per hour is,including all the repairs for a year!yikes
This is the perfect tool for dealing with ANTIFA rallies.
Kamikaze Yamamoto h
But all the root systems are still there? They'll just grow back, with a vengeance.
Once this machine is finished you just use a regular brush hog from that point on.
Yeh! A lot of this is Lantana. Very prolific in Qld in certain areas and Yes! It does come back...bad. spray it, Dig the roots out...burn the stuff and it will re appear. Takes awhile to rid your property of this shit if you don't follow up on it.
i so could demo one for ya
Nice . There's no backup in this one . It will walk the dog and kick the cat at the same time .
location?
Queensland coast.
Im guessing South East Qld. And fucking Lantana.
O tratorista tá aprendendo
All that time in reverse is a cutter head goofing off.
Eight hours of cutting, ten hours of wrenching!
Try a Bandit Model 5000 if ya want to do the job properly!
Looks like it make a big giant mess to me.
Really amazing to see how some more nature gets destroyed
Looks like a skid steer with a long undercarriage..