How to make your own swimming decoys

This is the full installation video for you to follow and install a Decoy Doctor kit on your decoys.
The links below are NOT affiliate links
-To order a Decoy Doctor kit, send me an email: [e-mail]
-5x7 Adapter Ring PDF template link: drive.google.com/file/d/1L1sQ...
-Tools:
Sander
Dremel tool with sanding cylinder
Drill and drill bits up to 7/16ths
Hot knife
Multi tool/oscillating tool
Philips screw driver
1/4” drive ratchet with 11/32” socket
¾” wrench
Wire strippers/wire crimpers : a.co/d/070x9nZZ
Heat gun / butane torch with heat tip: a.co/d/00xucA8F
Utility knife
Needle nose pliers
Tape Measure
-Other materials:
Permatex 80050 Adhesive Silicone Sealant: a.co/d/0aWaJvT4
Anti-Seize: a.co/d/0g0vfgYI
Petroleum Jelly (Vaseline)
Ox-Guard or dielectric grease: a.co/d/04zZnJXs
Paper towels
Rubber gloves
Isopropyl alcohol
Tape
-Pump and Battery sold separately on Amazon!
Pump: a.co/d/0amJqCH3
Battery: a.co/d/0eoJIWCP
-Here's Everything included with The Decoy Doctor Kit:
*Hardware (separated into 3 bags)
2 x m3x8 screw
2 x m3 washer
2 x m4x8 screw with lock and flat washer
*The second bag has:
8 x m4x14 screws
8 x m4 washer
*The 3rd bag has:
8 x 8-32 x 3/4 machine screws
8 x 8-32 nylock nuts
16 x #8 washers
The electrical connectors are in 2 separate bags:
*The first bag has:
1 x 2 hole lever wire connector
1 x 3 hole lever wire connector
2 x solder seal butt connectors
1 x Male waterproof connector
1 x Female waterproof connector
4 x rubber grommets
2 x male wire pins
2 x female wire pins
*The second bag has
1 x male barrel connector pigtail
1 x waterproof female barrel connector pigtail
1 x waterproof switch
1 x ¼” npt cable gland
1 x 3D printed 2 hole wire grommet for the cable gland
1 x programable timer
1 x 3D Printed pump outlet sleeve
*Remaining 3d printed parts:
1 x adapter ring
1 x battery plate
1 x battery box
1 x Gasket
1 x hole template
1 x Adapter ring installation tool
Chapters
0:00 Intro
0:17 Decoy selection and fitment
1:19 Tools, materials and kit contents
1:39 Prepping the decoy
3:56 Adapter Ring Installation
6:27 Charging cable installation
8:20 Cover Plate assembly
9:12 Waterproof Connector installation
11:50 Battery installation
12:26 Timer and wiring
13:39 Bile pump installation
14:08Cover Plate installation
15:07 Pump outlet fittings installation
16:08 Demonstration
16:48 Outro

[@FowlPursuitOutdoors]

available on my Etsy shop: www.etsy.com/shop/BiskitBuilt3D

[@Adrnclipz]

Could u add a small speaker with duck noises or do ducks not respond to that

[@FowlPursuitOutdoors]

@@Adrnclipz that would be illegal in my state but you could