I tried to print this on a Da Vinci Jr, with XYZWare as my slicer. Had a layer height of 0.2 mm with medium speed. The bottom part where the screw is suppose to extrude was stuck to the other back parts.
The Video suggested it need to be prints with its back to the printer bed but the stl file wants you to print in on the side. It will not work on the side unless you use support and then the parts will stick together even more
![ใจเสาะบนเกาะนาคี - อ๊ะอาย สกุณาพร เสียงวิหค [Official MV] | ค่ายเพลงเป็นหนึ่ง](http://i.ytimg.com/vi/jbcmGQkfyOg/mqdefault.jpg)
Cool mechanism! Going to try this. 👌
I tried to print this on a Da Vinci Jr, with XYZWare as my slicer. Had a layer height of 0.2 mm with medium speed. The bottom part where the screw is suppose to extrude was stuck to the other back parts.
The Video suggested it need to be prints with its back to the printer bed but the stl file wants you to print in on the side. It will not work on the side unless you use support and then the parts will stick together even more