For those wondering. Jesse battled against 8 competitors over 64 hours of forging in 4 episodes of forged in fire and came out undefeated with $50,000. The dude was and is unstoppable.
@@earthknight60I’ve been saying this since Ben’s last victory! One of the previous winners went up against Dave Baker and beat him, so a Ben vs Jesse showdown would be EPIC
@@jhublades I am not a blacksmith, but I love watching true makers. Subscribed today when I watched this. I'm going to go through the rest of your work. Blade makers and luthiers. ☮
As a leather worker with hand problems - the maker gods made scalpels for a reason. Learn to use a scalpel and if you need to - bevel guides or simple square cut guides (like a ruler but with a bit of extra height (the plane going up from your cutting table) at 90 degrees or whatever bevel you want to cut - get way more precise with way less muscle in your thumbs. Instead of hand punching an Awl through before stitching, Drill press or a through punch to hammer your holes into a sacrificial cutting mat or soft wood (cork or balsa) topped block - some leather makers use a lamination of leather, cork and end grain like a butchers block. When your punch pliers won’t work - you’ll always regret bodging a work around - get a hand punch and do it right. Make an “anvil” with scrap wood if you need to. Lubricate your stitching holes if your needles are sticking. I use Dubbin or coconut oil or bees wax depending on what’s handy. Leaving comments - and editing this comment as stuff progressed, I got a bit confused, sorry if I’m repeating myself😅 If you’re double stitching and contact cementing a leather piece to make an heirloom quality piece - reinforce the belt loop and the eye of the sheath - the places that will contact the edge or spine of your blade and the parts that are going to friction rub against a belt or other mount point. Laminate Kevlar or Kydex on the inside of the loop or the inside of the leather sheath. You can also frame the blade with thin wood or a 3d printed skeleton to add a bit of structure and protect the blade loads more / like a scaled down version of a sword sheath. It’s a pain and I wouldn’t bother for anything except this kind of project price tag - but for EDC that’s gonna get handed down to grandkids or something - it makes a difference. I also like putting a magnet on the inside as a secondary retention mechanism. You’ll barely notice it when drawing - unless you’re doing quick draw knife throwing or something it will never both you - but it stops the blade from jostling free in horizontal or even inverted carry (depending on size of magnet and weight of the knife) even if the retention loop comes undone or something. For divers or climbers or an arborist who works at heights, you might even use line of multiple magnets to give them really secure retention. Big F-off magnets are an option, but tend to be fragile and difficult to fit to available space - a couple of neodymium button magnets are usually better, as long as you make sure you keep the magnet polarity consistent. Sewing magnets can be tricky. Bone needles or laminated leather makes your life easier and lamination lets you get a thicker more premium feel for less at the leather shop. Obvious inner liner materials (microfibre or cotton canvas or softer/thinner leather) work great, but I’ve also seen HEMA LARP types use velvet for an aristocrats rapier type luxury builds. Adding magnets during lamination with contact cement should be pretty obvious and straight forward. Sorry this ended up a wall of text.
3 months and I am very pleased with the fact that you made two blades with sheaths. Maybe do another sword, another twist Damascus build, or another build to expand your repertoire.
as a leather worker 1. i recommend soaking the leather in water before adding the texture punch, it just makes it stay longer and can make it look more popped. 2. when cementing the leather, i recommend roughing up the slick side of the leather to ensure a better bond between the two pieces of leather but since you cemented it, it would be fine. also with stitching your hands will bleed no matter how tough, a lot of pros use a sewing machine to prevent it and speed up the stitching process by hours. finally a leather conditioner and a satin finish are both amazing things to use no matter the leather project, i use them on all my belts and it never disappoints, you can find those at any leather shop but i like tandy's.
Jesse beat 8 dudes back to back to back to back and won the final earnings of $50k in Forged In Fire. This dude is an incredibly talented and smart guy.
My Nana and I used to stay up all night when we first came across your Forged in Fire episodes. We watched every single one and then moved on to all of your TH-cam videos. Now every time you post a new video it brings me that same joy we shared:) id love to hear more about your forged experience!!
After you won all those challenges, I was wondering what happened to you, so I looked you up on TH-cam, and there you were. Been a subscriber for a while, and I showed my friends the challenges, and they loved the way you worked. Still love watching you work. Much love from Texas bro.
I used to make some custom knives for myself and a few select friends. I'm very impressed with your work. I'm 59 now, so I'm just enjoying my grandchildren, but I've been watching your videos a few hours now, and I'm subscribing.
Best kind of videos to find in your TH-cam feed when you wanna put on something in the background to get some work done. Motivational, informative, calming and overall a great experience. Thank you, I've been watching you for a while now!
Nothing like making things with your own hands.I am a bench jeweller by profession.The satisfaction and workmanship that goes into every step in sequence is trully rewarding.Well done Jesse they are true works of art and all the labour of love in your creations speak for them selves.
Really great work Mr Hu... Kyle uses 35 for his mosaic... less distortion depending on the thickness of your initial pieces... If you make them thin with a 45 it elongates too much, he says. But is not as important if one removes a lot with grinding... And there is no shame in using sheet metal! And your humbleness is real nice to see! Keep creating!!
These builds are insanely unique, and that's what makes these videos so enticing! I think it would be cool to see a Damascus Pattern Shamshir/Scimitar build, or some type of curved sword, in lieu of a katana. ⚔
i AM NOT a knife maker of any type. however, i really enjoy your videos, from the details you provide as to "why" you are doing what you do, including things not directly related to the project itself. i hope you continue to see success, you seem to deserve it. this project came out BEAUTIFUL!!! the leather segment was a very nice touch, in my opinion
Great work Jesse, making a matched pair of things is always more difficult than making a single one and you nailed it. Another point you could have made when it comes to forging your blades thinner to save time grinding and material is that with mosaic damascus or complex pattern weld, any additional forging will either cause excess distortion in your pattern or stretch it out too much and ruin it completely. You are correct in saying that you could forge on a piece of plain carbon steel for your last tile to save on mosaic material in the tang. I forge multi-bar pattern welded swords and I nearly always forge weld on a mild steel tang, there's actually historical precident for this with many historical blades having welded on tangs. On the leather working, try marking your holes with a stitching wheel or similar and then drill them on the drill press. Find whichever size hole works best for your needles and it'll make the whole process much easier on your hands. Keep up the good work!
Hey Jesse, I would LOVE to see a collab with Kyle Royer one day. It would be so interesting to see him pass down some of his skills and experience bladesmith to bladesmith. I think it would be very educational and entertaining to watch.
Leatherworking tip from someone fairly new at it: I use a drill press instead of the scratch awl to poke the final holes after punching the diamonds. Also, making them a little bigger than you did eliminates the strain you had in getting the needles through, and you won't break so many needles or hurt your hands. The diamond stitches are still what you see when you're done, but it's much easier.
Jesse Hu, you are undefeated 8 or 9 from Forged in Fire, also Ben Abbott is undefeated. Now for all the Forged in Fire fans. Let's make this show happen Jesse Hu vs Ben Abbott!
My God, these are GORGEOUS!! There's very good reason why these demand a premium. The artistry, effort, pain, and painstaking attention to detail are on another level
You are one the best Knife Makers I've ever seen and you've only just started. Can't wait to see what your mind comes up with next. Would love to see you collab with Kyle Royer
Cant wait to watch the new video. I would just like to say that your videos inspire me to make my knives better and get better at my craft to make knives like you.
The Damascus patterns are crazy cool. These two Bowies are among my few favourite ones that i have seen made of the best knife building artists here on TH-cam. Every little detail is to my liking with both these knifes. Thanks from Norway, for this video🫶
for your next sheath, consider having the strap that hold the blade on the back side so when you draw the knife you don't risk cutting the strap. the way you put them on there's a risk of it flapping back down and resting on the edge.
My eyes were glued to you're video from start to finish! FIF might've helped you progress a little quicker but you have a natural talent like no other keep up the amazing work!
HOLY MOLY jesse!!! You have outdone yourself! This video was by far your best one yet! Everything about it was amazing! The videography was really good and the editing was put together so well! It really made it entertaining the whole time! Now these knives are straight up works of art! Appsolultly STUNNING work! The mosaic pattern you showed being made was mesmerizing! It was so unique and I have never seen one quite so intricate and detailed! I recently had two knives warp horribly in a quench and one even snapped at the tip. Do you have any suggestions on what could be going wrong! Thank you, and thank you for taking the time to make such quality knives and content! I’ve said this before and i’ll say it again you are a true inspiration to me! God bless.
Have you thought of having big outdoor fans pulling the heat out? I went and did a blacksmith blademaking class near me and he put big outdoor fans to help pull the heat out. Helped a ton in terms of temperatures he just placed near the back of his forge.
Well done my brother. You earned everything you have through hard work, nobody can ever take that away from you and you deserve everything in your shop and more. It's the little details that make you great, you have high standards that money cannot buy. Those twins are fantastic.
Jesse you are a beast at this. I saw all the episodes of Forged in fire that you won and you were unbeatable. My question is, if you didn't have all these tools before the show, where did you get your skills?
Being able to execute hard exacting work is a talent in itself. It’s great that you’re starting so young. The artistry will grow exponentially with your knowledge and experience. I’m looking forward to watching you grow for years and decades to come.
One of your videos was in my recommended a little while ago. I watched it and your work is impressive. After that I watched all your duels on FIF. You were amazing and so were all your builds. You’ve got skills “Big Chungus” lol. These blades came out beautiful, excellent work. Thanks for sharing.
Jesse, your craftsmanship is unreal. The level of detail in these knives is just mind-blowing. Saw you on Forged in Fire and was blown away by your talent. Keep up the incredible work, man ! 👊🔥
@@jhublades That's so exciting! I love these longer form videos. In an age where people's attention span is the size of a piece of paper is thick, I prefer looooooooooong videos, because I am a stickler for details. I love how in depth you get in your videos. Did you see Kyle's newest video that he posted the other day? That beautiful dagger with the stone handle??? 🤩😍🤩😍
In three videos you've managed to be my favorite knifemaker on youtube. watched the premiere live yesterday (my yesterday), and seeing the 47k views this morning makes me very happy! Keep it up Jesse!
I've seen your gladiator forged in fire and it's pretty damn impressive. It's what led me here after one of your early videos was recommended by youtube
Congrats on finishing school! That's a great accomplishment, especially considering the amount of effort it takes to make videos like this. For future projects, I've love to see you attempt a folding pocket knife...
Your ethnicity boasts of being the best in mathematics in the entire world. Reason for your brilliance. I am awestruck everytime i watch you weave your magic.
Funny youre telling people about your time on Forged… Im here BECAUSE of your appearance on that show! Awesome work!! Glad you put your winnings to your shop!!
Hey player, the P100 filter you’re using is for really fine dust particles, like asbestos. For the chemicals you need an organic filter, it filters out vapors, like epoxy, or acid fumes. If you can smell through your respirator, check your fit, or replace with new ones. There’s more that goes into just putting a respirator on, but that should help you better than nothing.
I would recommend removing the mild steel before normalizing, you even mention it, carbon homogenization. It's also called carbon migration. Imagine when you put something hot and cold together they want to equal out. You put something at 100deg with something at 50deg, in theory they will balance at 75deg. You are doing that normalizing with the mild steel. Every time you get the blade up into those temps some of your carbon is migrating to the mild steel.
I love seeing the process from start to finish especially with all the minor mistakes, it helps us learn how we can overcome the same as well as I think this video was just cool to watch true art and craftsmanship from someone who clearly cares. Keep up the great work man.
I just heard that i should show my interest about your Forged in Fire story - here it is!!! Tell us about it, with all the details, how it really was, especially all this time restrictions. How it damaged your work, what kind of shortcuts you have to use, etc. PS: If you ever have a chance to compete againg, who would be the most challenging opponent? You can name few of them.
This video kicked ass, love your style of narration and subtle comedy. I watched this while I waited for 700 mods for Fallout New Vegas to be downloaded, so this was peak
You probably already know this as another method, but when needing to mark depth on a drill bit, I wrap painters tape at the mark instead of Sharpie so that you can quickly make another mark on the same bit. Not that there is anything at all wrong with using Sharpie and cleaning it off later if needed!
Your craftsmanship is next level, Jesse! The detail you put into those knives is just unreal. Saw you on Forged in Fire and you've been killing it ever since. Can't wait to see what you come up with next! Keep pushing the boundaries, man! 🔥👊
Only took me 3 months to make this video
We're patient, coz we know it'll be worth it!
3 months well spent
Worth it
Where’s the discord👀 you said you’d maybe make one after this video
Man they look great, I love your videos and nice job!
For those wondering. Jesse battled against 8 competitors over 64 hours of forging in 4 episodes of forged in fire and came out undefeated with $50,000. The dude was and is unstoppable.
Damn this dude is a beast
Never got to see him go up against Ben in a 'beat the judges' competition though.
That would have been interesting.
我看過八集很好的比賽
Do you know which season and which episodes he was in?
@@earthknight60I’ve been saying this since Ben’s last victory! One of the previous winners went up against Dave Baker and beat him, so a Ben vs Jesse showdown would be EPIC
Literally documentary length forging videos, incredible
That’s the goal! Hope you enjoy :)
@@jhublades I am not a blacksmith, but I love watching true makers. Subscribed today when I watched this. I'm going to go through the rest of your work. Blade makers and luthiers. ☮
So humble about your time on forged in fire. You my man where a god on that show. My wife and I have both watched your episodes numerous times.
not humble... embarrassed is probably a better word. forged in fire is an overly trendy joke.
멋지다 나도 하나 갖고 싶다
As a leather worker with hand problems - the maker gods made scalpels for a reason.
Learn to use a scalpel and if you need to - bevel guides or simple square cut guides (like a ruler but with a bit of extra height (the plane going up from your cutting table) at 90 degrees or whatever bevel you want to cut - get way more precise with way less muscle in your thumbs.
Instead of hand punching an Awl through before stitching, Drill press or a through punch to hammer your holes into a sacrificial cutting mat or soft wood (cork or balsa) topped block - some leather makers use a lamination of leather, cork and end grain like a butchers block.
When your punch pliers won’t work - you’ll always regret bodging a work around - get a hand punch and do it right. Make an “anvil” with scrap wood if you need to.
Lubricate your stitching holes if your needles are sticking. I use Dubbin or coconut oil or bees wax depending on what’s handy.
Leaving comments - and editing this comment as stuff progressed, I got a bit confused, sorry if I’m repeating myself😅
If you’re double stitching and contact cementing a leather piece to make an heirloom quality piece - reinforce the belt loop and the eye of the sheath - the places that will contact the edge or spine of your blade and the parts that are going to friction rub against a belt or other mount point.
Laminate Kevlar or Kydex on the inside of the loop or the inside of the leather sheath. You can also frame the blade with thin wood or a 3d printed skeleton to add a bit of structure and protect the blade loads more / like a scaled down version of a sword sheath. It’s a pain and I wouldn’t bother for anything except this kind of project price tag - but for EDC that’s gonna get handed down to grandkids or something - it makes a difference.
I also like putting a magnet on the inside as a secondary retention mechanism. You’ll barely notice it when drawing - unless you’re doing quick draw knife throwing or something it will never both you - but it stops the blade from jostling free in horizontal or even inverted carry (depending on size of magnet and weight of the knife) even if the retention loop comes undone or something. For divers or climbers or an arborist who works at heights, you might even use line of multiple magnets to give them really secure retention. Big F-off magnets are an option, but tend to be fragile and difficult to fit to available space - a couple of neodymium button magnets are usually better, as long as you make sure you keep the magnet polarity consistent.
Sewing magnets can be tricky. Bone needles or laminated leather makes your life easier and lamination lets you get a thicker more premium feel for less at the leather shop. Obvious inner liner materials (microfibre or cotton canvas or softer/thinner leather) work great, but I’ve also seen HEMA LARP types use velvet for an aristocrats rapier type luxury builds. Adding magnets during lamination with contact cement should be pretty obvious and straight forward.
Sorry this ended up a wall of text.
I love you work and watching the videos., but 90 minutes at bed time is too long 😅. It's gonna take me a few days
@@RickD5468 i get you, i watch it in the evening but da lot of stuff while watching. Cooking or other household stuff.
3 months and I am very pleased with the fact that you made two blades with sheaths. Maybe do another sword, another twist Damascus build, or another build to expand your repertoire.
I'd love to see a sword as well! Or a mace or polearm, although those are pretty far outside of what you usually make for this channel.
While you were installing that AC unit, I realized that I would watch you build literally anything.
as a leather worker 1. i recommend soaking the leather in water before adding the texture punch, it just makes it stay longer and can make it look more popped. 2. when cementing the leather, i recommend roughing up the slick side of the leather to ensure a better bond between the two pieces of leather but since you cemented it, it would be fine. also with stitching your hands will bleed no matter how tough, a lot of pros use a sewing machine to prevent it and speed up the stitching process by hours. finally a leather conditioner and a satin finish are both amazing things to use no matter the leather project, i use them on all my belts and it never disappoints, you can find those at any leather shop but i like tandy's.
Jesse beat 8 dudes back to back to back to back and won the final earnings of $50k in Forged In Fire. This dude is an incredibly talented and smart guy.
Can't wait, I'm building my own forge press! You actually explain everything in your videos, they are so informative!
My Nana and I used to stay up all night when we first came across your Forged in Fire episodes. We watched every single one and then moved on to all of your TH-cam videos. Now every time you post a new video it brings me that same joy we shared:) id love to hear more about your forged experience!!
Man i cant express the joy im feeling rn. Jesse videos are so peaceful
After you won all those challenges, I was wondering what happened to you, so I looked you up on TH-cam, and there you were. Been a subscriber for a while, and I showed my friends the challenges, and they loved the way you worked. Still love watching you work. Much love from Texas bro.
I used to make some custom knives for myself and a few select friends. I'm very impressed with your work. I'm 59 now, so I'm just enjoying my grandchildren, but I've been watching your videos a few hours now, and I'm subscribing.
Best kind of videos to find in your TH-cam feed when you wanna put on something in the background to get some work done. Motivational, informative, calming and overall a great experience. Thank you, I've been watching you for a while now!
Nothing like making things with your own hands.I am a bench jeweller by profession.The satisfaction and workmanship that goes into every step in sequence is trully rewarding.Well done Jesse they are true works of art and all the labour of love in your creations speak for them selves.
Really great work Mr Hu... Kyle uses 35 for his mosaic... less distortion depending on the thickness of your initial pieces... If you make them thin with a 45 it elongates too much, he says. But is not as important if one removes a lot with grinding... And there is no shame in using sheet metal! And your humbleness is real nice to see! Keep creating!!
That is the most betiful Damascus pattern I have ever seen
These builds are insanely unique, and that's what makes these videos so enticing! I think it would be cool to see a Damascus Pattern Shamshir/Scimitar build, or some type of curved sword, in lieu of a katana. ⚔
i AM NOT a knife maker of any type. however, i really enjoy your videos, from the details you provide as to "why" you are doing what you do, including things not directly related to the project itself. i hope you continue to see success, you seem to deserve it. this project came out BEAUTIFUL!!! the leather segment was a very nice touch, in my opinion
yes!!! more forged and fire stories!! I subbed because i saw you on there
Great work Jesse, making a matched pair of things is always more difficult than making a single one and you nailed it.
Another point you could have made when it comes to forging your blades thinner to save time grinding and material is that with mosaic damascus or complex pattern weld, any additional forging will either cause excess distortion in your pattern or stretch it out too much and ruin it completely. You are correct in saying that you could forge on a piece of plain carbon steel for your last tile to save on mosaic material in the tang. I forge multi-bar pattern welded swords and I nearly always forge weld on a mild steel tang, there's actually historical precident for this with many historical blades having welded on tangs.
On the leather working, try marking your holes with a stitching wheel or similar and then drill them on the drill press. Find whichever size hole works best for your needles and it'll make the whole process much easier on your hands.
Keep up the good work!
Hey Jesse, I would LOVE to see a collab with Kyle Royer one day. It would be so interesting to see him pass down some of his skills and experience bladesmith to bladesmith. I think it would be very educational and entertaining to watch.
The patience and precision is very admirable.I applaud his work of art.😊
Leatherworking tip from someone fairly new at it:
I use a drill press instead of the scratch awl to poke the final holes after punching the diamonds. Also, making them a little bigger than you did eliminates the strain you had in getting the needles through, and you won't break so many needles or hurt your hands. The diamond stitches are still what you see when you're done, but it's much easier.
This is undoubtedly one of the most beautiful Damascus knives I have ever seen. You, sir, are a master and a legend.
Jesse Hu, you are undefeated 8 or 9 from Forged in Fire, also Ben Abbott is undefeated. Now for all the Forged in Fire fans. Let's make this show happen Jesse Hu vs Ben Abbott!
My God, these are GORGEOUS!! There's very good reason why these demand a premium. The artistry, effort, pain, and painstaking attention to detail are on another level
Those blades look insane! Keep it up man!
Unreal! Your craftsmanship has gotten next level. Pat yourself on the back bro🙌 Can’t even put into words how beautiful these knifes came out.
Your skill and dedication are a genuine joy to watch. Excellent vid!
Absolutely one of the most beautiful things I've ever seen. Great job buddy!
And hello from Damascus👋🏻❤
Thank you!!! Your words mean a lot :)
You are one the best Knife Makers I've ever seen and you've only just started. Can't wait to see what your mind comes up with next. Would love to see you collab with Kyle Royer
Cant wait to watch the new video. I would just like to say that your videos inspire me to make my knives better and get better at my craft to make knives like you.
Can't wait to show it to you!
That's awesome :D I'm honored to hear that I'm inspiring you on your journey.
I watched the episodes of FIF you were on, which is why I sought you out on TH-cam. You make a nice blade
The Damascus patterns are crazy cool. These two Bowies are among my few favourite ones that i have seen made of the best knife building artists here on TH-cam. Every little detail is to my liking with both these knifes. Thanks from Norway, for this video🫶
Those pieces look absolutely stunning ! Great handicraft !
Thank you :)
Im in Awe watching an expert artisan making things. Insane! Love it! Amazing 999
Excellent job! Great fit and finish! Pleasure to watch!
the fact we both are techno fans makes me respect u alot congratz dude
for your next sheath, consider having the strap that hold the blade on the back side so when you draw the knife you don't risk cutting the strap. the way you put them on there's a risk of it flapping back down and resting on the edge.
My eyes were glued to you're video from start to finish! FIF might've helped you progress a little quicker but you have a natural talent like no other keep up the amazing work!
Nice job. Those came out beautifully.
World class craftsmanship. Well done. Man i would LOVE one of those knives.
HOLY MOLY jesse!!! You have outdone yourself! This video was by far your best one yet! Everything about it was amazing! The videography was really good and the editing was put together so well! It really made it entertaining the whole time! Now these knives are straight up works of art! Appsolultly STUNNING work! The mosaic pattern you showed being made was mesmerizing! It was so unique and I have never seen one quite so intricate and detailed! I recently had two knives warp horribly in a quench and one even snapped at the tip. Do you have any suggestions on what could be going wrong! Thank you, and thank you for taking the time to make such quality knives and content! I’ve said this before and i’ll say it again you are a true inspiration to me! God bless.
Well said!
Could be a few things: too thin going into quench, uneven heat going into the quench, wrong oil for the steel you're using.
Bro?!! That's a beautiful 😍 knife 😍 🔪 gorgeous
This was amazing - congrats on getting Rambo as a client!
I caught those Forged in Fire episodes on Netflix, and you had an awesome run
First off Copper is amazing. Second off I don’t watch your content for short cuts I watch because I love forging and learning.
Have you thought of having big outdoor fans pulling the heat out? I went and did a blacksmith blademaking class near me and he put big outdoor fans to help pull the heat out. Helped a ton in terms of temperatures he just placed near the back of his forge.
Well done my brother. You earned everything you have through hard work, nobody can ever take that away from you and you deserve everything in your shop and more. It's the little details that make you great, you have high standards that money cannot buy. Those twins are fantastic.
Man i love your videos, there so educating and yet so entertaining. keep up the good work 👍
The process was incredible with 134 degree temps in AZ and the finished knives are beautiful. Thanks for sharing.
I'm glad you enjoyed!
Jesse you are a beast at this. I saw all the episodes of Forged in fire that you won and you were unbeatable. My question is, if you didn't have all these tools before the show, where did you get your skills?
Jesse, I saw you on forged an fire and immediately knew I loved your style and method of making knives. A true pleasure to watch thank you.
Damn Jesse, these two are stunning!! Amazing work.
A western sword or dagger would be really cool to see in the future!
This is probably one of the best youtube videos i have ever watched hands down.
Can't wait to see the results of these blades!!!!
That shimmering/changing effect on the wood is called chatoyance! It’s the illusion of depth being generated in a flat and opaque surface!
Was so into the video the beat drop at 1:24:57 gave me a jumpscare 😂
Being able to execute hard exacting work is a talent in itself.
It’s great that you’re starting so young.
The artistry will grow exponentially with your knowledge and experience.
I’m looking forward to watching you grow for years and decades to come.
Great work Jesse, Love your work 👍
Thanks! I appreciate it
Watching you SLAY FIF rn 😮 you’re amazing!
Damn keep killin it brotha love the motivation and videos.
Thanks man, more to come👍
Fantastic work, Jess! I really enjoyed watching this 90 min long ASMR blade-making session.
One of your videos was in my recommended a little while ago. I watched it and your work is impressive. After that I watched all your duels on FIF. You were amazing and so were all your builds. You’ve got skills “Big Chungus” lol. These blades came out beautiful, excellent work. Thanks for sharing.
Meanwhile, you are becoming well attuned with your artistry. Kudos on following your current passion! 😊
When you got your wisdom teeth removed I thought you were going to say you passed out from heat
You deserve your own show. Thank you so much for your content!
Awesome as always. I think you should make the "Rivers of Blood" katana from the game Elden Ring. It looks sick and you'd probably like it!
Jesse, your craftsmanship is unreal. The level of detail in these knives is just mind-blowing. Saw you on Forged in Fire and was blown away by your talent. Keep up the incredible work, man ! 👊🔥
You and Kyle Royer's channel, are my favorite bladesmiths on TH-cam. Are you a Mastersmith?
Honored to be mentioned in the same category as Kyle. I’m still an ABS apprentice😅, two grades below master smith.
@@jhublades That's so exciting! I love these longer form videos. In an age where people's attention span is the size of a piece of paper is thick, I prefer looooooooooong videos, because I am a stickler for details. I love how in depth you get in your videos.
Did you see Kyle's newest video that he posted the other day? That beautiful dagger with the stone handle??? 🤩😍🤩😍
STUNNING!!! ive said it 3 or 4 times now on here, your level of precision is crazy. please keep it up.
Well, that's a pretty interesting knife you got there
In three videos you've managed to be my favorite knifemaker on youtube. watched the premiere live yesterday (my yesterday), and seeing the 47k views this morning makes me very happy! Keep it up Jesse!
I've seen your gladiator forged in fire and it's pretty damn impressive. It's what led me here after one of your early videos was recommended by youtube
Congrats on finishing school! That's a great accomplishment, especially considering the amount of effort it takes to make videos like this. For future projects, I've love to see you attempt a folding pocket knife...
Super impressive as always 👍
Your ethnicity boasts of being the best in mathematics in the entire world. Reason for your brilliance. I am awestruck everytime i watch you weave your magic.
I just made a folding knife for my grandpa, so I thought it would be great if you made a damask folding knife.
Maybe once I get a mill, the fine machining is too difficult without one
Nicest knives I’ve ever seen. I’m 50 years old and loved knives since I can remember. What you created is perfectly EPIC!!!!
something that would be really cool to see you build that would really push you into uncharted waters would be to build a Zweihander.
It would also be even more difficult if you made it with one of your beautiful and complicated Damascus patterns.
Funny youre telling people about your time on Forged… Im here BECAUSE of your appearance on that show!
Awesome work!! Glad you put your winnings to your shop!!
Next, big and lengthy project to make can be a katana with several layers. Like 36,000 layers that pattern will be mesmerizing to watch.
That would definitely be time consuming😭. Though at 36,000 layers it would look like mono-steel
Hey player, the P100 filter you’re using is for really fine dust particles, like asbestos. For the chemicals you need an organic filter, it filters out vapors, like epoxy, or acid fumes. If you can smell through your respirator, check your fit, or replace with new ones. There’s more that goes into just putting a respirator on, but that should help you better than nothing.
I would recommend removing the mild steel before normalizing, you even mention it, carbon homogenization. It's also called carbon migration. Imagine when you put something hot and cold together they want to equal out. You put something at 100deg with something at 50deg, in theory they will balance at 75deg. You are doing that normalizing with the mild steel. Every time you get the blade up into those temps some of your carbon is migrating to the mild steel.
I love seeing the process from start to finish especially with all the minor mistakes, it helps us learn how we can overcome the same as well as I think this video was just cool to watch true art and craftsmanship from someone who clearly cares. Keep up the great work man.
I just heard that i should show my interest about your Forged in Fire story - here it is!!! Tell us about it, with all the details, how it really was, especially all this time restrictions. How it damaged your work, what kind of shortcuts you have to use, etc.
PS: If you ever have a chance to compete againg, who would be the most challenging opponent? You can name few of them.
This video kicked ass, love your style of narration and subtle comedy. I watched this while I waited for 700 mods for Fallout New Vegas to be downloaded, so this was peak
Amazing work!
My son and I are just getting started as amateurs in making knifes with a little Amazon forge and a railroad tie anvil and you are an inspiration!
man no way i knew i seen you somewhere before but coouldnt remember where and been rewatching FIF trecently hahaha
You probably already know this as another method, but when needing to mark depth on a drill bit, I wrap painters tape at the mark instead of Sharpie so that you can quickly make another mark on the same bit. Not that there is anything at all wrong with using Sharpie and cleaning it off later if needed!
Wow, even with my tiktok goldfish attention span i watch and enjoy every minute of your videos.
The amount of attention to detail and dedication you put into this is was amazing
For a non leather worker you did really good job👍. Do I also see a Martin Guitar case in the background?
Amazing! You're one of the reasons I started blade smithing.
That’s awesome!!! Welcome to the craft :)
Amazing skills! I love watch your videos not gonna lie will you consider make a Bao Teng Saber?
Your craftsmanship is next level, Jesse! The detail you put into those knives is just unreal. Saw you on Forged in Fire and you've been killing it ever since. Can't wait to see what you come up with next! Keep pushing the boundaries, man! 🔥👊
YOOOO TECHNOBLADE NEVER DIES 💛 2:55
My goat will never die