@@Stridertrees Interior Live Oak can be partially deciduous due to drought conditions. They can lose leaves and dormant buds will break in the spring. But they're mostly evergreen. Coast Live Oak on the other hand stays 100% evergreen.
kgilleran hahahaha a drought does not make a broadleaf evergreen deciduous. What is with these ridiculous pontifications??? What about a declining live oak? Also “partially deciduous? And what if said drought happens in the summer? You know? When droughts typically occur? Still partially deciduous? Wow. 🤦♂️
I think the term you all are looking for is “Semi-Evergreen”. Meaning a deciduous tree that does not lose all of one season’s leaves before the next season’s emerge. This is normally due to the tree species evolving in a harsher environment than it is planted in currently. Chinese elms / Ulmus parvifolia do this in my area (San Jose, CA) all the time & the same tree can vary year to year depending on conditions. To my knowledge, true evergreen trees generally hold an individual leaf for 3-4 years, but this can vary significantly.
Thanks! I'm a self employed landscaper/maintainer. This vid shows I don't respect the pruning process as much as I should. For one, I do not sani my cutters often enough nor do I use the reasoning you have for selecting cuts aside from dead and drooping limbs. Very informative.
I wish there were more useful insights for those situations. Usually it boils down to having a client who is willing to have you out multiple years in a row. It often. takes way more than one pruning session to remedy major issues like that
Broafleaf evergreen* not evergreen deciduous... By the way that tree has a codominant stem, does it have bark inclusion because that tree will eventually fail if it does...
Felco. Yeah, most of what I saw you cut, I'd never use my saw for those cuts, I'd use my Felco hand prunner, or lopping shears. It's easier, faster, cleaner.
I live in MN. It is my understanding live pursuing, especially oaks, should. Be done in winter. My concern is if I target dead or dying branches, how do I identify them since the leaves would now have fallen from the tree? TIA RJ
If a limb is dead cut it of whenever. .With Live limbs,nowadays the powers that be have decided that summer or late summer pruning is Ok because the tree is able to heal up faster. Don’t take more than 20% of the live canopy. Best not to prune right after the tree has expended it’s energy with new leaves. Try not to prune off anything that is wider than your finger tips to your wrist. Only if you must.
Pruning live oak is fine all year long. You actually wouldn't want to thin or prune for crown reduction in the summer due to risk of sunscald if you go to heavy. Pruning most trees in the dormant season if fine. Especially pine due to the risk of bark beetles.
In northern states it's imperative to prune Oaks in the cooler weather, oak wilt is common and spreads via roots once it establishes. If one needs to be pruned at at unsafe time we will spray it with pruning spray
Doesn’t matter that those pruners are bypass. They’re awful. They rip every cut after a week or two of use. The corona bull pruner is the ONLY functioning pruner on the market. It’s black and has a totally different design and literally costs $15 more than the standard bypass shown here. I’m aware Silky makes a pruner but it’s too expensive to adapt to a regular pole and not a Hayate.
Daniel, you should consider uploading a similar video to help educate young arborists and correct some popular misconceptions. I appreciate your contents and I think many could benefit from your expertise on this. Edit: I recognize you already have published quite a bit of content on pruning, but presenting the information in a consolidated format that details thought processes and so forth might be more helpful. Anyone looking for more in-depth explanations could resort to your more detailed content.
@@Andrew-hw9fq I wish I had done that years ago. It's been on my to-do list, but I've been dragging my heels. Thanks for the suggestion. Hopefully get to this winter
Yes dude you are ignorant on this. Plus how the F… can you hurt these monsters without chainsaws when doing topping aka crown reduction for a Live Oak in California for a million dollar view , Live Oaks with with 14 inch DBH grow 4-5 feet in a year and 10 feet in 2 they are just about unstoppable. In the background of this video it looks like unmaintained Oaks .
The magnificent Pine trees around me don't need you, or your "arborist" buddies, to prune anything whatsoever. Furthermore, the magnificent Pine tree will tower far above you, your "arborist" buddies, and any trees you ever have in your collective lives.
There are times where if a branch is too small to cut; a pair of secateurs is better than a pruning saw itself otherwise it will tear and can cause disease in the future.
The video and some of the comments here talk about beetles but not Oak Wilt which is crazy here in Michigan. Were not allowed to prune or remove Oaks except in winter
it's not a true evergreen, because it does loose its leaves, but it happens so fast that it appears like an evergreen. so I think its kinda both? unlike other deciduous oaks, these gradually lose and replace all their leaves annually
So…let’s just start with…trees don’t need to be trimmed. “THEY WILL SELF PRUNE” So this is 99% for looks and the Reason trees are trimmed is that it’s the bread and butter Of arborists and people Want their trees to look a certain way. But if you fall in to those categories - get a real arborist. Not a tree trimmer and not your average run o the mill weekend graduate arborist.
I didn't know it took so much for tree cutting. All I wanted to do is cut some branches that are cutting up my car because its grown so much. Now Im not sure if I want to cut anything.
Hmmm. So silky makes about ever tooth configuration imaginable. As well every size blade and shape imaginable. Yeah silky is totally the wrong brand for pruning.
@@briankennedy1313 hmmmm smart@@@ reply Brian....average climber will be rockin a zubat or similar with coarse teeth. What i thought id expressed was the need for a fine tooth saw cos hes clearly struggling to cut those smaller diameter branches cleanly in this vid...
turtlezed I guess I wasn’t clear. SILKY MAKES FINE TOOTH, MEDIUM TOOTH, LARGE TOOTH, AAAAAAANNNDDDD EXTRA LARGE TOOTH. They go even further to specify the teeth per inch. They carry about 20 different styles all with 4 to 5 teeth configurations.
turtlezed if you can’t make a clean, perfectly finished cut with ANY given silky, you need practice. Most companies think you should be able to make a perfect cut, any diameter, any tree, with a power saw.
Nice Job. Here Colorado the Crowns of our Ashes tend to be to0 dense to deal with high Winds....& unless you can see the Sky though the Crown & eliminate the Horizontals that don't seem to be able to handle such high Winds as a Chinook it's like having a spinnaker Sail in your front Yard.
Live oaks are nice to work.on..ive never heard of pass through pruners...but bypass are available everywhere...the only thing that is silky about the draw of that saw is the name.I have tried silky and the action is not smooth..the saw is too big for most of the cuts that you are doing ..that style of cutting with that sized saw will always result in tear cuts.. for efficiency.would be better with felco or infaco electronic with a small or medium blade...those cuts could be shown to your arborist friends
In France, especially in south of France, in Dordogne where I'm, we have a lot of very similar trees, quercus ilex (chêne vert), because the leaves are like ilex (houx, holly). The wood is heavy, very hard, we have planty of them on our land, because it's dry, hot and ful of limestone. One is probably very old (more than 300 years old). Some old leaves are falling during the summer, just a part, and the tree still "evergreen". The wood is beautiful, used to make knives handle. We cut some falling old and big quercus ilex, and the middle was deep black, not rooten, hard and amazing, because of a begginig of disease , very nice! In our county, they are planted for truffle (expensive mushroom).
I think you may mean 'lion tailing', which from my Googling is a terrible way to leave a tree - all bushy on top and totally thinned out down below. It's an aesthetic thing - DON'T do it!!
4:48 what is an evergreen deciduous tree? I thought ever greens were trees that didn’t lose their leaves and a deciduous tree was a tree that loses its leaves?
Same procedure except it takes 3 times longer because of the density. I’m talking about California Coast live Oaks. Some interior Coast live Oaks in California or say Holly Oaks just forget thining the trees and just reduce back heavy end weight of thin the tips. I have been an ISA certified arborist for 25 years or 28 years of tree work.
Can you clarify 4:50, it’s an evergreen deciduous?
Indeed ! It keeps it’s leaves year round, but they are broadleaf trees, not conifers.
I should clarify better. That was my mistake, “Deciduous” refers to trees that lose their leaves annually but I meant to say “broadleaf” evergreen.
@@Stridertrees Interior Live Oak can be partially deciduous due to drought conditions. They can lose leaves and dormant buds will break in the spring. But they're mostly evergreen. Coast Live Oak on the other hand stays 100% evergreen.
kgilleran hahahaha a drought does not make a broadleaf evergreen deciduous. What is with these ridiculous pontifications??? What about a declining live oak? Also “partially deciduous? And what if said drought happens in the summer? You know? When droughts typically occur? Still partially deciduous? Wow. 🤦♂️
I think the term you all are looking for is “Semi-Evergreen”. Meaning a deciduous tree that does not lose all of one season’s leaves before the next season’s emerge. This is normally due to the tree species evolving in a harsher environment than it is planted in currently. Chinese elms / Ulmus parvifolia do this in my area (San Jose, CA) all the time & the same tree can vary year to year depending on conditions. To my knowledge, true evergreen trees generally hold an individual leaf for 3-4 years, but this can vary significantly.
Thanks! I'm a self employed landscaper/maintainer. This vid shows I don't respect the pruning process as much as I should.
For one, I do not sani my cutters often enough nor do I use the reasoning you have for selecting cuts aside from dead and drooping limbs.
Very informative.
I love the headline. Don't be hack. I come from a town where every tree residential tree guys don't know how to trim properly. Drives me nuts
Wow! I wish I could climb a tree like that. Thank you for the tip on how to prune a tree. 😊
I would love to see a video on how to repair and correct poorly pruned trees. Like lions tail, water sprouts, and topping.
I wish there were more useful insights for those situations. Usually it boils down to having a client who is willing to have you out multiple years in a row. It often. takes way more than one pruning session to remedy major issues like that
@@Stridertrees Thanks for the response.
At the beginning “trees can catch a cold too” i learned something new
He was just making a reference that trees can get sick, or get bacteria from other trees!
Great info throughout the video
Great stuff, thank you for the video!
Everyone has there ideas on it. One love to c is ornamental pear. Only cos they go mental. Thanx
Liked your video brother! Stay safe and climb high fellow tree rat. 🤘
Broafleaf evergreen* not evergreen deciduous... By the way that tree has a codominant stem, does it have bark inclusion because that tree will eventually fail if it does...
Looks great thanks for another informative video
What hoodie are you wearing?
What I want to know is how to angle cut a branch. If it’s angled,swhich direction the new shoot goes.
Cut perpendicular to where the branch was growing... at the branch collar
Check out Original Lowe pruners, you'll love them. Love your videos.
Felco. Yeah, most of what I saw you cut, I'd never use my saw for those cuts, I'd use my Felco hand prunner, or lopping shears. It's easier, faster, cleaner.
Thanks!
I live in MN. It is my understanding live pursuing, especially oaks, should. Be done in winter. My concern is if I target dead or dying branches, how do I identify them since the leaves would now have fallen from the tree?
TIA
RJ
If a limb is dead cut it of whenever. .With Live limbs,nowadays the powers that be have decided that summer or late summer pruning is Ok because the tree is able to heal up faster.
Don’t take more than 20% of the live canopy. Best not to prune right after the tree has expended it’s energy with new leaves. Try not to prune off anything that is wider than your finger tips to your wrist. Only if you must.
Thanks
Great video. Most pruning should take place in the summer months and not the dormant season though.
Pruning live oak is fine all year long. You actually wouldn't want to thin or prune for crown reduction in the summer due to risk of sunscald if you go to heavy. Pruning most trees in the dormant season if fine. Especially pine due to the risk of bark beetles.
In northern states it's imperative to prune Oaks in the cooler weather, oak wilt is common and spreads via roots once it establishes.
If one needs to be pruned at at unsafe time we will spray it with pruning spray
Love the protos dude. Is that a dip job or something?
Actually Edify&co designed the decal, and installed it for me. They’ve been doing All the graphics for Strider trees and do such a good job!
How’d you get it white?
Cool
Doesn’t matter that those pruners are bypass. They’re awful. They rip every cut after a week or two of use. The corona bull pruner is the ONLY functioning pruner on the market. It’s black and has a totally different design and literally costs $15 more than the standard bypass shown here. I’m aware Silky makes a pruner but it’s too expensive to adapt to a regular pole and not a Hayate.
Always where a helmet when hand pruning. Especially when it makes you look like a Power Ranger
Light bulbs
I like your stuff.. but you are way off the mark here, repeating total myths
Daniel, you should consider uploading a similar video to help educate young arborists and correct some popular misconceptions. I appreciate your contents and I think many could benefit from your expertise on this.
Edit: I recognize you already have published quite a bit of content on pruning, but presenting the information in a consolidated format that details thought processes and so forth might be more helpful. Anyone looking for more in-depth explanations could resort to your more detailed content.
@@Andrew-hw9fq I wish I had done that years ago. It's been on my to-do list, but I've been dragging my heels. Thanks for the suggestion. Hopefully get to this winter
@@murphy4trees can you mention what things he mentioned that you thought are myths?
A deciduous evergreen... You need to brush up on your Horticulture.
"Dont be a hack"🤣 and then prunes a live oak while its not dormant 🤣👏👏👏 great job bud
These live oaks don’t go dormant in this part of CA and we also don’t really have oak wilt here either so it’s even less consequential.
Yes dude you are ignorant on this. Plus how the F… can you hurt these monsters without chainsaws when doing topping aka crown reduction for a Live Oak in California for a million dollar view , Live Oaks with with 14 inch DBH grow 4-5 feet in a year and 10 feet in 2 they are just about unstoppable. In the background of this video it looks like unmaintained Oaks .
The magnificent Pine trees around me don't need you, or your "arborist" buddies, to prune anything whatsoever. Furthermore, the magnificent Pine tree will tower far above you, your "arborist" buddies, and any trees you ever have in your collective lives.
I enjoyed seeing the thought process on what to remove and where to make the cuts.
Great info. I do a ton of these in South Florida and I agree with your ideology
💯 percent.
There are times where if a branch is too small to cut; a pair of secateurs is better than a pruning saw itself otherwise it will tear and can cause disease in the future.
He said just this I just imagine he was being lazy since he was making the video but I learned from him saying this
Well-presented video on how to prune and shape a tree. Very helpful!
Very informative. You present yourself very well.
Thank you very much very useful and marketable knowledge. Greatly appreciated
How does one tell if the limb is dead, or dying? Particularly with pine trees, as that's 90% of what I've got in my yard.
The video and some of the comments here talk about beetles but not Oak Wilt which is crazy here in Michigan. Were not allowed to prune or remove Oaks except in winter
Well done! 👍 Greetings from Russia!
I would like to see even closer where you are cutting, like zoom on in there! Thanks for this info!
I learned something again, I do every time I watch you,thank you again.
it's not a true evergreen, because it does loose its leaves, but it happens so fast that it appears like an evergreen. so I think its kinda both? unlike other deciduous oaks, these gradually lose and replace all their leaves annually
So…let’s just start with…trees don’t need to be trimmed. “THEY WILL SELF PRUNE” So this is 99% for looks and the Reason trees are trimmed is that it’s the bread and butter Of arborists and people Want their trees to look a certain way. But if you fall in to those categories - get a real arborist. Not a tree trimmer and not your average run o the mill weekend graduate arborist.
And where'd you get your arborist degree from?
Dude, your thumbnail makes you look like someone out of a sci fi movie like Starship Troopers
It’s really hard to see what you’re doing. Why not a close-up?
Cool process....small 🌲 to prun...never stop learning...😁😁😁
أين المقص الصغير 😡
Silky back pull saws are the absolute best
I need you in my garden 🙈
Are you allowed to have the tree of Gondor as your brand logo? I was going to use it for mine lol
Ehhhh 🤷🏼♂️
I didn't know it took so much for tree cutting. All I wanted to do is cut some branches that are cutting up my car because its grown so much. Now Im not sure if I want to cut anything.
I find my silky too coarse a saw for fine pruning, you need a fine tooth pruning saw and bypass shears, as you say,for these small jobs....
Hmmm. So silky makes about ever tooth configuration imaginable. As well every size blade and shape imaginable. Yeah silky is totally the wrong brand for pruning.
@@briankennedy1313 hmmmm smart@@@ reply Brian....average climber will be rockin a zubat or similar with coarse teeth. What i thought id expressed was the need for a fine tooth saw cos hes clearly struggling to cut those smaller diameter branches cleanly in this vid...
turtlezed I guess I wasn’t clear. SILKY MAKES FINE TOOTH, MEDIUM TOOTH, LARGE TOOTH, AAAAAAANNNDDDD EXTRA LARGE TOOTH. They go even further to specify the teeth per inch. They carry about 20 different styles all with 4 to 5 teeth configurations.
@@briankennedy1313 im thinking mountain, molehill mate, most ppl will know what i meant.
turtlezed if you can’t make a clean, perfectly finished cut with ANY given silky, you need practice. Most companies think you should be able to make a perfect cut, any diameter, any tree, with a power saw.
Nice Job. Here Colorado the Crowns of our Ashes tend to be to0 dense to deal with high Winds....& unless you can see the Sky though the Crown & eliminate the Horizontals that don't seem to be able to handle such high Winds as a Chinook it's like having a spinnaker Sail in your front Yard.
Live oaks are nice to work.on..ive never heard of pass through pruners...but bypass are available everywhere...the only thing that is silky about the draw of that saw is the name.I have tried silky and the action is not smooth..the saw is too big for most of the cuts that you are doing ..that style of cutting with that sized saw will always result in tear cuts.. for efficiency.would be better with felco or infaco electronic with a small or medium blade...those cuts could be shown to your arborist friends
In France, especially in south of France, in Dordogne where I'm, we have a lot of very similar trees, quercus ilex (chêne vert), because the leaves are like ilex (houx, holly). The wood is heavy, very hard, we have planty of them on our land, because it's dry, hot and ful of limestone. One is probably very old (more than 300 years old). Some old leaves are falling during the summer, just a part, and the tree still "evergreen". The wood is beautiful, used to make knives handle. We cut some falling old and big quercus ilex, and the middle was deep black, not rooten, hard and amazing, because of a begginig of disease , very nice! In our county, they are planted for truffle (expensive mushroom).
Cool video! Please don’t use words like “vectors” though when describing how to trim a tree!
Hey bro, what's the length on that tsurugi? I'm looking at buying one, they look sick
In my limited experience of growing stuff if it doesn’t se the sun it needs to go , but maybe not all at once
What are the best tools for pruning on a tree that starting to shade out my garden is it best to use a ripsaw chainsaw or a pool tree pruners
Local arborist says you should never lion's tail an oak tree.
Yeah…I think I’ll pay a gardener to do it. Too advanced for me.
Think as an aborist c a tree one way. Open n yer is it right sometimes maybe not
Can you do a before and after picture side by side at the end next time?
I love your helmet, thank you for posting this video!
GREAT INFORMATION, WELL PRESENTED.
TOM BYRNE
Great video man, rock on!
I urgently need such a helmet)
Showed no closeups
Thank you!
Looks great
Great info..thanks
Cool
Cool
wow
What is livestailing I couldn't find anything
I think you may mean 'lion tailing', which from my Googling is a terrible way to leave a tree - all bushy on top and totally thinned out down below. It's an aesthetic thing - DON'T do it!!
4:48 what is an evergreen deciduous tree? I thought ever greens were trees that didn’t lose their leaves and a deciduous tree was a tree that loses its leaves?
I meant to say evergreen broadleaf. It’s a tree with leaves that don’t fall every winter.
@@Stridertrees Okay makes sense haha great videos man. Thanks for the content.
I'd love to see more live oak pruning
Same procedure except it takes 3 times longer because of the density. I’m talking about California Coast live Oaks. Some interior Coast live Oaks in California or say Holly Oaks just forget thining the trees and just reduce back heavy end weight of thin the tips.
I have been an ISA certified arborist for 25 years or 28 years of tree work.