How to disassemble 📱 Samsung Galaxy J3 (2016) SM-J320 Take apart Tutorial

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ต.ค. 2024
  • Instructions with a detailed description and additional materials on our website, follow the link. vrm24.com/inst...
    Reviews with specifications, photos of printed circuit boards and parts. vrm24.com/revi...
    If you have additional questions, you can ask our specialists who will try to answer them in as much detail as possible. vrm24.com/ques...
    Our manual is suitable for all Samsung Galaxy J3 (2016) SM-J320 - Samsung J320FN (Europe); J320F (EMEA); J320F/DD (India); J320A (AT&T); J320P (Sprint, Virgin Mobile, Boost); Galaxy Amp Prime (Cricket); Galaxy J3 V (Verizon); J320M (LATAM); J320G (Asia) models - released for the markets of different countries.
    The VRM24.COM channel is dedicated to disassembling and repairing phones, tablets, smartwatches, and other mobile devices.
    We provide an opinion on this channel, look inside the top brand devices, and reply to frequently asked questions. So, start in now -
    watch this video and ask a question. You are welcome here!
    Also, check the VRM24.COM website, where you will find repair instructions, pictures of motherboards, sub-boards, and electronic components - vrm24.com/.
    Facebook: / vrm24com
    Instagram: / vrm24com_official
    This channel: / @vrm24com
    Наш на RUSском канал: / @vrm24ru
    Support Us: / vrm24com
    Warning
    This content is intended to be used for informational and entertainment purposes only.
    You are using this video direction and this content at your own risk.
    Following these directions in this video will void your warranty. You are performing this repair at your own risk.
    #vrm24com #SamsungGalaxyJ3 #Samsung

ความคิดเห็น • 112

  • @webassasin
    @webassasin 7 ปีที่แล้ว +8

    Be really careful when you take the motherboard off.
    The thin part can break really easily!!!

    • @JS-iv9mp
      @JS-iv9mp 7 ปีที่แล้ว

      is it the blue or the green-looking part?

    • @jay-ye5ru
      @jay-ye5ru 5 ปีที่แล้ว

      Too late wish I would have know that thanks man

  • @dawnofjustice4689
    @dawnofjustice4689 6 ปีที่แล้ว +2

    Thanks man.
    Worked perfectly.
    Wasn't able to save the phone... but it was much easier to open with your Vid.
    (Corrosion Damage)

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว

      Thanks for your opinion! We appreciate it.

  • @VediGlagoli
    @VediGlagoli 2 ปีที่แล้ว

    Ну так а сам экран вы не сняли, или как, его теперь нужно снова греть и снимать ?

  • @jackjonson2696
    @jackjonson2696 5 ปีที่แล้ว

    Hello mate my power on off button has stoped working an i cannt lock screen eather. Will i nerd to replace the button ? Is it difficult to do once the phone is open ?

  • @МирбекМанасбекуулу-ж7ь
    @МирбекМанасбекуулу-ж7ь 3 ปีที่แล้ว

    Samsung : SM-J320

  • @lucianochiarini8019
    @lucianochiarini8019 2 ปีที่แล้ว

    ¡Hola! gran video (yo había visto otro video donde lo desarma sin mostrar como) el tuyo es perfecto, funciona muy bien muy bien. Excelente.

  • @МирбекМанасбекуулу-ж7ь
    @МирбекМанасбекуулу-ж7ь 3 ปีที่แล้ว

    Samsung MS-J320

  • @OrangeBlue122
    @OrangeBlue122 ปีที่แล้ว

    Where is mainboard located and will the data inside it be wiped if I destroy it?

    • @Vrm24com
      @Vrm24com  ปีที่แล้ว +1

      Hi, if the internal memmory is not damaged - the answer is no. The question is - how to get it if the mb is damaged? btw how bad is it? I mean the damage.

  • @gladyshdz3359
    @gladyshdz3359 7 ปีที่แล้ว

    hola juan mira hace como seis horas al cel de mi esposo le cayo agua por la entrada de los auriculares y seguia funcionando bien pero ya ahorita no le funciona el touch que puedo hacer? Gracias por tu respuesta

  • @joshviles4970
    @joshviles4970 7 ปีที่แล้ว

    I have been looking for a string video and I keep finding people who have every interest to take the time and showcase this item as if it's not get some commercial on TV they really go out of their way to express how it has this and this and this as if they'd seen the commercial more than one time I could not help but pick on them and apparently other still the same. I haven't watched yet so I got high hopes thank you for having a disassembly video

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Hello, thanks for your opinion, we appreciate it!

  • @BerndThomasSchuller
    @BerndThomasSchuller 7 ปีที่แล้ว

    I've replaced the display on my J3, which was broken, and the phone seems to work, but the display stays off - no keys lit, nothing, as if the multipin connector was not engaged. Any idea?

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Hello, at first we'd removed the screen and connect it again ( to avoid of a human factor) if all is fine, try to connect a new one (the check of malfunction the screen). The both are the easiest approaches for analyzing of this fault.

  • @theeorehekchannel
    @theeorehekchannel 5 ปีที่แล้ว

    Do i need to do all of this if i need to fix the Vibrate motor? It sounds funny and i want to see if it needs replacement or just adjusting

    • @Vrm24com
      @Vrm24com  5 ปีที่แล้ว

      Hi, the vibrator motor locates under PCB inside the frame and looks like a black round thing.

  • @musicfan5026
    @musicfan5026 7 ปีที่แล้ว +1

    Simply the BEST ! thank you again !

  • @littletechkids3077
    @littletechkids3077 7 ปีที่แล้ว +1

    works i needed to replace my screen but then i cracked the screen so now i HAVE to fix my screen :D

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Hi, is the screen cracked or an upper layer - the glass?

    • @littletechkids3077
      @littletechkids3077 7 ปีที่แล้ว

      It is now on both

    • @littletechkids3077
      @littletechkids3077 7 ปีที่แล้ว

      But yeah the upper layer is cracked I might have heated it up and took it apart to late.

  • @enriquehernandez4901
    @enriquehernandez4901 7 ปีที่แล้ว

    donde puedo comprar la pantalla soy de puebla

  • @Prez13100
    @Prez13100 7 ปีที่แล้ว

    I have a black screen now with no signs of screen breakage. Is there a separate back light in there or do you just replace the screen and it's fixed?

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว +1

      Hello, an AMOLED display doesn't have backlight separately. It's means that you have to (if the display has broken) replace the LCD.

    • @darrenpaulmaddox6781
      @darrenpaulmaddox6781 7 ปีที่แล้ว

      Check all connections look at led screen with a bright light at an angle just check everything

  • @gelhope5510
    @gelhope5510 7 ปีที่แล้ว

    thanks for tutorial just wandering next to where sim card ad memory stick goes i have a cover on my phone as u dont do i need to remove it it seems too difficult

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Hello, repair of sim\mmc connector requires an experience and special tools. You have to resolder the connector.

  • @sueppacet9718
    @sueppacet9718 4 ปีที่แล้ว

    Terima kasih tutorialx

  • @vortnex3472
    @vortnex3472 7 ปีที่แล้ว +1

    hi

  • @loahkilynkd6355
    @loahkilynkd6355 6 ปีที่แล้ว

    What is the little plastic cover he takes off at the very beginning? 0:30

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว

      Hello, the cover for LCD connector.

  • @ger-lz4mj
    @ger-lz4mj 7 ปีที่แล้ว +1

    i need to replace volume button as its stuck on safe mode, is it possible to take the lcd off safely

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Hi, that video can help, but do it carefully. On this model lcd is glued to the edge only. and take off the screen with motherboard, you have to simultaneously.

    • @devilzuser0050
      @devilzuser0050 6 ปีที่แล้ว

      Never buy Samsung..... ever again!

    • @shawniyang7974
      @shawniyang7974 6 ปีที่แล้ว

      this has just happened to me can u give me some help

  • @eltioactivouniversalpag4783
    @eltioactivouniversalpag4783 6 ปีที่แล้ว

    Saludos amigo que temperatura y cuanto de aire es recomendable para el mismo. Por cuanto tiempo. Espero. Mi respuesta. Gracias

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว

      Hola, no mucho! Quiero decir, lo hice hace unos segundos - comprobado con un spudger (herramienta de apertura) - y de nuevo antes de sentir que el pegamento se calentó. Temp - 80C o 178F.
      Not for long! I mean, did it few secs - checked with a spudger (opening tool) - and again before you feel that glue warmed. Temp - 80C or 178F.

  • @JioTak
    @JioTak 5 ปีที่แล้ว

    Love u sir

  • @dk1ng99
    @dk1ng99 7 ปีที่แล้ว

    Hola, necesito ayuda, al puerto de audifonos le entro como una pelotita del mismo tamaño (es dura) y esta al final del puerto, como lo podria sacar?, gracias

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      3:27 Hola, la toma de auriculares no funciona?

    • @dk1ng99
      @dk1ng99 7 ปีที่แล้ว

      vremonte24.ru O sea yo creo que si , solo que le entró algo del mismo tamaño que el puerto y no se como sacarlo , tendría que desarmar y sacar el puerto y limpiarlo?

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Ok, sí, puede quitar la toma de auriculares y lo que quieres hacer, después - depende de usted.
      en inglés, you can remove the headphone jack and what you wanna do, after - is up to you.

  • @carbaretta9924
    @carbaretta9924 7 ปีที่แล้ว

    what is the slot next to the dual sd/sim slot?

    • @webassasin
      @webassasin 7 ปีที่แล้ว

      it is the duos model

  • @anthos1048
    @anthos1048 7 ปีที่แล้ว

    How am I supposed to dismantle it if I don't have a heat gun...

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Hello, you can use some kind of a hair dryer. Some 'masters' use the method - to wrap phone with a towel and put phone on a heater for a while BUT it's not safe!!!

    • @darrenpaulmaddox6781
      @darrenpaulmaddox6781 7 ปีที่แล้ว

      Use an electric fire,hair dryer anything that blows hot air eat lots of beans

  • @ioan-silviumerlusca1668
    @ioan-silviumerlusca1668 7 ปีที่แล้ว

    Hello, I will try to heat it with a hair dryer but how do i know when the surface of the phone hits 70C?

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      We don't have things for temperature measurement too. Usually we heat the surface (30sec-1min) and after that trying to open carefully. If the glue still strong you have to heat the surface anew and carefully!

    • @ioan-silviumerlusca1668
      @ioan-silviumerlusca1668 7 ปีที่แล้ว

      Oh, ok! Thank you!

    • @GabsNXT
      @GabsNXT 7 ปีที่แล้ว

      at 80c its adhesive easy to peel off

  • @CPineda1997
    @CPineda1997 8 ปีที่แล้ว

    Donde puedo comprar la pantalla?
    Where can I buy the screen?

    • @Vrm24com
      @Vrm24com  8 ปีที่แล้ว

      Hello, you can buy lcd on amazon or other online stores, just put (write) what you looking for in search field

  • @interstateallbatterycenter980
    @interstateallbatterycenter980 6 ปีที่แล้ว

    What kind of gloves are those?

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว

      Hello, the antistatic gloves.

  • @sergionunez9611
    @sergionunez9611 6 ปีที่แล้ว

    como se llama lo que usa , esa cosa que creo que tira calor jajajjaa

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว

      Hola, la estación del Soldado con la pistola de calor.

  • @lilirossi9731
    @lilirossi9731 6 ปีที่แล้ว

    Это Ютуб начал переводить названия видео на Итальянском или это автор знает итальянской ?) Главное когда снимать материнку нужно быть внимательней в нижней часте, где она более тонкая так как можно её очень просто сломать.

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว

      Здравствуйте, спасибо за конструктивный комментарий. Итальянский мы к сожалению не знаем, но усердно работаем над этим. Анотации составляют члены нашей комманды.

    • @lilirossi9731
      @lilirossi9731 6 ปีที่แล้ว

      Если вдруг нужно будет совет насчет Итальянского языка, можете написать в личку ВК - Солодков Володя. По сколько уже 10 лет в Италии живу и работаю в лаборатории по ремонту смартфонов и ПК.

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว

      Да конечно, хороший совет всегда нужен! Напишите нам в личку на TH-cam - адрес в VK, а лучше FaceBook. Может найдем общие точки для кооперации.

  • @olmo4767
    @olmo4767 6 ปีที่แล้ว

    Question: how is the flat tipped metal tool called? Great video!

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว +1

      Hello, it's called a spudger or a steel opening tool.

    • @olmo4767
      @olmo4767 6 ปีที่แล้ว

      vremonte24.ru thank you for your kind answer! What would be its potential usses in cel phone repair?

  • @julianbruning2302
    @julianbruning2302 7 ปีที่แล้ว

    hallo, ich will meine Auxsteckdose aus bauen, da da noch ein ende meiner anlage drinne steckt. kommt man so direkt an den Auxanschluss ran?
    danke im vorraus

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Hallo, ich kann die Frage nicht richtig verstehen.
      in English, I can't understand the question correctly

    • @julianbruning2302
      @julianbruning2302 7 ปีที่แล้ว

      Also mir ist vom Kabel ein Stück des Auxsteckers abgebrochen, das abgebrochene steckt noch im Handy,ich weiß nicht ob ich dann daran komme wenn ich auseinander gebaut habe.

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Beide können Sie Pinzette verwenden, wenn dies nicht helfen wird - Sie müssen die Demontage als eine Möglichkeit zur Behebung dieses Problems berücksichtigen.
      Both, you can use tweezers, if this won't help - You have to consider the disassembly as a way of resolving this problem.

  • @Muslimkhan-dl3nt
    @Muslimkhan-dl3nt 6 ปีที่แล้ว

    how to repair mother baord of Samsung SM-J320 (J36) in case of dead screen.

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว +1

      Hello, if the screen is dead why do you need to repair the MB?

    • @Muslimkhan-dl3nt
      @Muslimkhan-dl3nt 6 ปีที่แล้ว

      no sir i Mean Mobile phone is dead cause of mother board.

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว +1

      Okay, I have two questions: what happened with the MB why do you think the board is irreversibly lost?

    • @Muslimkhan-dl3nt
      @Muslimkhan-dl3nt 6 ปีที่แล้ว

      because the technician told me that your phone MB is fully disable. i just plug my phone to charge and after that the phone is dead.

    • @Muslimkhan-dl3nt
      @Muslimkhan-dl3nt 6 ปีที่แล้ว

      thank you so much for replay

  • @bertferrero
    @bertferrero 6 ปีที่แล้ว

    This was oddly satisfying to watch

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว

      Hi, why?

  • @vanillatheweeb6853
    @vanillatheweeb6853 7 ปีที่แล้ว

    what shiuld i do for water damage????

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว +2

      Hi, you should go to repair service as fast as you can.

    • @musicfan5026
      @musicfan5026 7 ปีที่แล้ว

      Right answer!

  • @gorandir3210
    @gorandir3210 6 ปีที่แล้ว +1

    Thanks

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว

      Hi, you're welcome!

  • @МирбекМанасбекуулу-ж7ь
    @МирбекМанасбекуулу-ж7ь 3 ปีที่แล้ว

    Бишкек

    • @Vrm24com
      @Vrm24com  3 ปีที่แล้ว

      С большим уважением!

  • @pyroshayniac1090
    @pyroshayniac1090 8 ปีที่แล้ว

    just my glass needs to be replaced not the LCD is that okay?

    • @Vrm24com
      @Vrm24com  8 ปีที่แล้ว

      Hello, Yes it's possible.

    • @pyroshayniac1090
      @pyroshayniac1090 8 ปีที่แล้ว

      vremonte24.ru Thank you!! I really appreciate your video and help.

    • @Vrm24com
      @Vrm24com  8 ปีที่แล้ว

      👌

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Hello, Yes you right, but we have qualified specialist and equipment,our suppliers provide us quality parts and etc plus big experience inside several years, we change many glasses many times per day, which why we reckon that somewhere working firms as we are. Make it at home you can but you got to have an experience to this repair. And the true reason understandable the differences between cost and purchasing power of people.

    • @webassasin
      @webassasin 7 ปีที่แล้ว

      you can't encourage a person who asks questions like this to try to change the outer glass.
      you should know better than that.
      it is a very delicate procedure that non experienced users can't get through.

  • @tersehickory110
    @tersehickory110 7 ปีที่แล้ว

    Why do you need to heat up the phone?

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Hello, the cover has been stuck to a frame with a double sided adhesive tape. Heating helps to soften the tape, that will facilitate the separation.

    • @littletechkids3077
      @littletechkids3077 7 ปีที่แล้ว

      to melt the seal

  • @seifabdennadher2987
    @seifabdennadher2987 8 ปีที่แล้ว

    Hi, do you have any idea what are these tow like circuits in the top right and below the battery, marked with E4? and is that an NFC tag in the back cover?
    Thanks :)

  • @alexismolina9228
    @alexismolina9228 7 ปีที่แล้ว

    MUY BIEN EXPLICADO

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Hola, Muchas Gracias!

  • @emiliobarreto4987
    @emiliobarreto4987 7 ปีที่แล้ว

    en cuantos grados ?

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Hola, 70C o 178F

  • @iorgogabriel9004
    @iorgogabriel9004 6 ปีที่แล้ว

    thanks for your tutorial !!!

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว

      Hi, happy to help!

  • @rbkgsm5598
    @rbkgsm5598 7 ปีที่แล้ว

    like it

    • @Vrm24com
      @Vrm24com  7 ปีที่แล้ว

      Hi, 👍

  • @Julzyfwesh
    @Julzyfwesh 6 ปีที่แล้ว

    I don't get it why do stupid people need surgical gloves to do such a small job like this? plus this is not a j3.

    • @Vrm24com
      @Vrm24com  6 ปีที่แล้ว +1

      Hello, it is not medical gloves which btw make of different polymers including latex, nitrile rubber, polyvinyl chloride and neoprene as written in Wikipedia :) It's the anti-static gloves. Why do we use it? I think to prevent damaging static discharge. Maybe people are not soo stupid or square? :) Also, the phone in the video is Samsung J3 2016.