*"Turn On Subtitles(CC) and Watch the Video!☝"* 👀 Product in Video (영상 속 유기냄비) : '한놋(Han Not)' - bit.ly/41KaEhy 대표전화 : 010-6262-0397 주소 : 경기도 여주시 대신면 초현길 76-1 E-mail : han_not@naver.com __ 📧 Contact (채널 문의) : allprocessofworld@gmail.com
I wonder if there are certain materials that are better cast than stamped? I feel too this isn't mass produced on the cheap either, more of an artisanal product as a luxury than a necessity~
@@FuzzballRenakitty For example, cast iron cannot be stamped because it is brittle. But brass, copper, steel - why not? The average consumer is unlikely to be able to tell whether it was cast or stamped.
@@MAXProcess I guess that could be the case- lots of depends and what ifs I suppose... maybe the consumers these are aimed at are there to pay for that extra work~ I did wonder if the thickness of the metal had to do with things though at first, since it does look pretty thick in places!
it's not a brass it is a bronze approx.. 21% tin + 79% copper alloy in the video will be less content of tin due to casting prosses. when melting brass can see blueish flame, pore the molten alloy into mould a lots of white smoke coming up which is zinc oxide. also cut the brass, it does not have a long continues chips.
Are handmade objects like this beautiful, cool, desirable? Yes. Are they actually better than a mass-produced product? I would say, definitely not. But as long as you buy something like this for love and not practicality, fantastic
10:30 always wonders how crazy such ppl. Just interesting how much times per year he goes to hospital to take off some metal sht that flies in his eye?
Ручной токарник, где вместо патрона деревянная кадушка это жесть. Не проще просто изначально отливать нужный дизайн, а не кромсать потом. Сами себе жизнь усложняют.
You have to remember that casting metal is not precise like stamping metal, casting metal of any kind leaves imperfections. They have to remove the imperfections. Вы должны помнить, что литье металла не является точным, как штамповка металла, любое литье металла оставляет дефекты. Они должны устранить недостатки.
*"Turn On Subtitles(CC) and Watch the Video!☝"*
👀 Product in Video (영상 속 유기냄비) : '한놋(Han Not)' - bit.ly/41KaEhy
대표전화 : 010-6262-0397
주소 : 경기도 여주시 대신면 초현길 76-1
E-mail : han_not@naver.com
__
📧 Contact (채널 문의) : allprocessofworld@gmail.com
😊😢😢NM no⁸😮
That's such a great process from start to finish. Thank you for taking time to film, edit and post this video.
Thanks A Lot .. there’s nothing I like more than to watch an artist at work . ❤ from Québec
Wonderful✨😍. I thought Koreans were using only porcelain and other material vessels but here are fabulous brass ware, 🎉🎉. Thank you🙏.
Wish we could let them know what a beautiful job they’ve done on the cookware they make! 🥳🥳🥳 They are good artisans!!😁🌺👍
Fantastic thank you 👏👏👏👏🇬🇧
I always buy Korean pots and pans, they're the best to cooking.
Great looking pot I'd sure cook in it!!!
Enjoyed your video and I gave it a Thumbs Up
I wonder how long it takes to make the product?
Isn't it easier to make these products by stamping rather than casting?
I wonder if there are certain materials that are better cast than stamped? I feel too this isn't mass produced on the cheap either, more of an artisanal product as a luxury than a necessity~
@@FuzzballRenakitty For example, cast iron cannot be stamped because it is brittle.
But brass, copper, steel - why not?
The average consumer is unlikely to be able to tell whether it was cast or stamped.
@@MAXProcess I guess that could be the case- lots of depends and what ifs I suppose... maybe the consumers these are aimed at are there to pay for that extra work~ I did wonder if the thickness of the metal had to do with things though at first, since it does look pretty thick in places!
I guess you were not paying attention, specifically the thickness of the metal is about 5mm thick. Do you think metal that thick can be stamped?
@@FuzzballRenakitty Yes, you're right, it could be due to the thickness of the
놋쇠는 자석에 붙지 않습니다.
예, 그렇습니다…Not쇠,
쇠가 아니기 때문이지요😂
ㅎㅎㅎ
BRAVOOOO !!! Quel travail ! à quoi sert ce pot svp? Bon courage.
Well done . Informative 👍👍👍. Thank you for sharing. Be safe🇨🇦
Прекрасное видео. Обожаю смотреть на труд Восточных Мастеров.
Using logs as lathe chucks is certainly an unusual approach to workholding.
Красотища!
Perfeito 👍👍
Lindo trabalho parabéns
Muito bom mesmo
Perfeito
Que terra está a utilizar?
it's not a brass it is a bronze approx.. 21% tin + 79% copper alloy
in the video will be less content of tin due to casting prosses.
when melting brass can see blueish flame, pore the molten alloy into mould a lots of white smoke coming up which is zinc oxide.
also cut the brass, it does not have a long continues chips.
예전엔 세숫대야도 있었는데~
What is the name of the music playing in the background?
Kreatif banget gan
Даже уголь печь комментируют 😁
Background music ❤❤
Are handmade objects like this beautiful, cool, desirable? Yes. Are they actually better than a mass-produced product? I would say, definitely not. But as long as you buy something like this for love and not practicality, fantastic
Why are of the processes of the world from South Korea 🤣😭
옛날 놋그릇에는 제련 기술이 부족해서 금이 들어가 있었다고 하지요. 놋그릇이 보기는 좋은데 딱기가 어려워서 싫어들 하지요.
Получилась утонченая копия оригинала, т.к сколько стружки поснимали.)
good
요즘은 방짜유기가 사라졌네요… ㅜㅜ ㅠㅜ
It is not brass ware but bronze ware
Excellent video👏
❤❤❤❤❤
10:30 always wonders how crazy such ppl. Just interesting how much times per year he goes to hospital to take off some metal sht that flies in his eye?
원래 진짜 유기는 구리와 주석으로만 만듭니다.
what amazingly beautiful things the masters of this forge make!
А что это за порошок, который они так старательно утрамбовывают?
🙂👍
Спасибо автору отличная работа
sad to see no mask or active ventilation.
Смущает только сплав цинка
Boa tarde exlente video
진짜네
МЕЖДУ ЦЫНКОМ И МЕДЬЮ НУЖНО ЛОЖИТЬ КУСОК КОКСА ТОГДА БУДЕТ СПЛАВ, Я ТАК ДУМАЮ ☝ ☝ ☝
УВАЖАЮ ВСЕ ПРОЦЕССЫ КОТОРЫЕ НЕСУТ ПРОИЗВОДСТВО В ЖИЗНЬ
Bel lavoro ho lavorato anche io 40 anni in fonderia di metalli non ferrosi ma ha me non sembra ottone quello lì sembra lega verde o sbaglio
👍👍👍👍
흔히 말하는 유기는 구리와 주석이 주성분 아닌가요? 그리고 그닥 노하우를 필요하는 공정이 없어서 자동화로 다 돌리면 훨씬 더 수월할텐데 라는 생각이 드네요
Как- будто закапывает кого-то под траурную музыку 😢😢😢.
😢😢😢 не смотри,,,
Ручной токарник, где вместо патрона деревянная кадушка это жесть. Не проще просто изначально отливать нужный дизайн, а не кромсать потом. Сами себе жизнь усложняют.
Так они же поверхность выводят, а не дизайн корректируют токаркой.
@@J..Sanders.2835 Ну он там столько стружки снимает, что похоже именно меняет.
Вам ли знать???
Они сохраняют традиции
You have to remember that casting metal is not precise like stamping metal, casting metal of any kind leaves imperfections. They have to remove the imperfections.
Вы должны помнить, что литье металла не является точным, как штамповка металла, любое литье металла оставляет дефекты. Они должны устранить недостатки.