How to Replace Inner Tie Rods 2002-09 Dodge RAM 1500

Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ia/1ASTE00434
The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms. This video shows you how to replace the inner tie rods on your 2002-2009 Dodge Ram 1500.
• Check here for more videos on the 2002-09 Dodge Ram 1500: • Dodge Ram 1500 3rd Gen...
This process should be similar on the following vehicles:
2002 Dodge Ram 1500
2003 Dodge Ram 1500
2004 Dodge Ram 1500
2005 Dodge Ram 1500
2006 Dodge Ram 1500
2007 Dodge Ram 1500
2008 Dodge Ram 1500
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• Locking Pliers 1aau.to/oa/1AXAA00139
• Side Cutters
• Torque Wrench 1aau.to/oa/1AXAA00044
• Copper Anti-Seize
• Gloves 1aau.to/oa/1AXSS00048
• Safety Glasses 1aau.to/oa/1AXAA00343
• Wire Ties
• Floor Jack 1aau.to/oa/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Dodge Ram 1500 3rd Generation 2002-09: • Dodge Ram 1500 3rd Gen...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*

[@joannfoster-6051]

Using that brush for the grease is E-V-E-R-Y-T-H-I-N-G! Thank you!!!

[@insomniatube7255]

This is so clean & well explained thank you , great job

[@kellybothe9804]

Thanks for the video. Very helpful.

[@BigD1395]

Super show and tell video brother thanks, you saved me $800 bucks my alignment specialist try to charge me to do it for me. 😋

[@TRQ]

+BigD1395 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@summervibes2147]

Yeah he was definitely trying to rip you off I got a quote from my alignment guy it was going to replace both my uppers my lower ball joints stabilizer arms and tie rods inner and outer for under $900

[@wyatta6528]

Do not torque your lug nuts to 130 foot pounds! Dodge released a TSB that says to only go to 100 because 130 warped the rotors.

[@benpinney940]

I was having some trouble getting my inner tie rod to unscrew while using the inner tie rod tool from O'Reilly's. I ended up buying a heat gun to warm up the area and it came right off.

[@travisj2695]

Does the 2010 ram 1500 take a lock washer?

[@geraldfahey2681]

Isn't there a breather hole/vent hole on the bellows boot that has to line up with small inlet tube on steering rack?

[@MurphyNick_12]

Is that a coil over conversion???

[@keklordgrey4522]

I have the rods... just can't find the Boots so I can replace them... meh...

[@gman781]

Mine won't re tread in

[@mexikano45]

You forgot the white seal

[@martinacosta2931]

Test