Perfect walk through for my identical mower. Mice chewed through the ignition wires while stored for the winter. Thanks for taking the time to film and post this.
That head light wire u tied down in the crinkled sleeve are the black pair going to the white on head lights or blue. And the single brown goes too the other either white or blue on headlight wires
I had this same mower and mice chewed through the headlights wiring. Thanks so much! do you think you could include the link to the wiring you bought? thanks
what is the white wires specifically on yth20k46 i completely rebuilt mine and yes it got rained on for 2 hour bairly but it wont cracnk start just jump start with cables what gives. theres a small white cable not connected nut mpwhere for it to go
That's the neutral probably... take a look at the video starting around 1:45. If it's another part of the harness I'm not sure what you're referring to. Hope that's helpful.
Hello I just found your video and I have the same model as you a d the same problem all the wires chewed up by mice could you provide the part number for the wiring harness
I don't have it handy, sorry. I got mine by putting the model number in here: www.ereplacementparts.com/ It's a very user friendly site and will help you find the part number with parts diagrams.
There's a tool to release the pin in connector just crimp new pin. I used to build the avionics wiring radar from separate wires I'd make the harnesses on F16 fighter jets mil spec USAF af pro certified.
@@jronaldleeI have to same yth22v46 And the places near me don't sell husqvarna parts anymore and Amazon doesn't have it so I was thinking you had got it off some other website.
Could you please send me pictures of the wires where they go into the plugs below the stearing, dog chew mine also, problem is, to expensive to buy new one, and i have to fix it. i just need to know which wires goes where, i am desperate aas the dog destroyed ny wires, and theres more than one white wire i will leave my email adress, i would realy apreciate if you could help me
Also wire ties pull ties are not good for mil spec electronics we use nylon lacing cord. It's flat string and we tie a cross knot . Then again our wire insulation u can hold a soldering iron on it it won't melt it's Teflon insulated wires
One question I can't find schematics to build my harness from spoiled wire. The head light harness mine melted on exhaust. Are the two black wires on headlight harness going to the blue n white wires on head lights black positive or is the single brown wires on yours?
Been through many videos trying to see step-by-step and you're the first to show exactly how the wiring went Thank you so much!
I made this video because I couldn't find one myself. Glad someone else found it useful. Happy mowing!
Pro tip : watch series on kaldroStream. Been using them for watching a lot of movies recently.
@Santiago Donald Yea, been watching on Flixzone} for since december myself :D
@Santiago Donald definitely, have been watching on Flixzone} for months myself :D
Perfect walk through for my identical mower. Mice chewed through the ignition wires while stored for the winter. Thanks for taking the time to film and post this.
Glad it was helpful!
This was SOOOOO helpful. Your a life saver.
Conner LaBrecque I’m glad it helped! The only reason I filmed it was because I couldn’t find one when I needed it.
Thanks for making and posting this informative video.
Glad you found it helpful.
Dude you just saved my ass. I had the wires all foobard and hooked up wrong!
Hey, cool, I'm glad it helped.
Mice made a nest in mine. Bit wires too. Thanks for making video
Wher are the fuses located on the Husqvarna riding lawn mower ?
Did the harness include the two thin wires that hook on the fuel solenoid for the bottom of the carburetor bowl?
That head light wire u tied down in the crinkled sleeve are the black pair going to the white on head lights or blue. And the single brown goes too the other either white or blue on headlight wires
You still have the old harness? I could use the ignition plug
It is long gone.
I had this same mower and mice chewed through the headlights wiring. Thanks so much! do you think you could include the link to the wiring you bought? thanks
are the brown and black wires you used to tie with those the original headlight wires?
You can use the Husqvarna store. Find your mower and drill down into the type of part (electrical). shop.husqvarna.com/us/home
@@jronaldlee thank you
do i have to buy the entire harness if all i need it the connector that goes to the ignition switch?
Miss ReMarkable - the individual pieces are not sold separately. Unfortunately, you have to buy the whole thing.
can i buy a used one
what is the white wires specifically on yth20k46 i completely rebuilt mine and yes it got rained on for 2 hour bairly but it wont cracnk start just jump start with cables what gives. theres a small white cable not connected nut mpwhere for it to go
That's the neutral probably... take a look at the video starting around 1:45. If it's another part of the harness I'm not sure what you're referring to. Hope that's helpful.
Is the secondary Power needed as mine seems to be disconnected
I believe it is, yes.
Hello I just found your video and I have the same model as you a d the same problem all the wires chewed up by mice could you provide the part number for the wiring harness
I don't have it handy, sorry. I got mine by putting the model number in here: www.ereplacementparts.com/
It's a very user friendly site and will help you find the part number with parts diagrams.
Do you no how to rewire from a smart switch to a keyed ignition on a GT 5500?
I do not
@@jronaldlee I have tried the only 2 shops in a 50 mile radius..no one know how to rewire it from a smart switch to a keyed ignition..
There's a tool to release the pin in connector just crimp new pin. I used to build the avionics wiring radar from separate wires I'd make the harnesses on F16 fighter jets mil spec USAF af pro certified.
Sir .. where can I get husqvarna wiring I was looking for but couldn't find ... I want to buy
Try www.ereplacementparts.com/
Where did you get the harness?
I just Googled the model number and "parts" to find retailers that sold parts for my mower.
@@jronaldleeI have to same yth22v46
And the places near me don't sell husqvarna parts anymore and Amazon doesn't have it so I was thinking you had got it off some other website.
Could you please send me pictures of the wires where they go into the plugs below the stearing, dog chew mine also, problem is, to expensive to buy new one, and i have to fix it. i just need to know which wires goes where, i am desperate aas the dog destroyed ny wires, and theres more than one white wire
i will leave my email adress, i would realy apreciate if you could help me
Sure, I still own the mower and can take some pictures for you. What’s your email?
Also wire ties pull ties are not good for mil spec electronics we use nylon lacing cord. It's flat string and we tie a cross knot . Then again our wire insulation u can hold a soldering iron on it it won't melt it's Teflon insulated wires
One question I can't find schematics to build my harness from spoiled wire. The head light harness mine melted on exhaust. Are the two black wires on headlight harness going to the blue n white wires on head lights black positive or is the single brown wires on yours?