Wonderful flight from Start to Finish. Lovely maneuvers, the spinning pirouettes in the middle of your flight was very nice! Thanks for sharing, especially from the other side of the Camera. 😍👍🚁😍👍
Super schöner Flug. Habe fast das gleiche Setup in meinem T-Line. Die Rapids sind bisher die besten Blätter, welche ich getestet habe. Komme mit dem TS Gain trotzdem nicht höher als ca. 55.
Quick question Michal! Do you run Vbar on this heli? If so, what is your main rotor gain? I am finding I am running a very low gain, around 40, to stop the head wobbling on stops. Perhaps it will disappear once the dampeners (C - hard) wear in.
I use NEO and VBarControl on all my helis. Main rotor gain depends on many factors, but 40 sounds to be really low. Check the distance on your servo horn where you put the ball link. Is your spindle true? Is your governor too aggressive, that is often the case for new NEO-gov users. Cyclic throw setup near 100? Did you trim and optimize? Apart from possible mechanical/setup issues, I often see the pilot itself being the reason for wobbles on stops - pilot's skills in combination with a very agile setup. Higher cyclic agility usually requires more expo. More expo as well helps quite a bit with some blades or even servos.
Hi JG, vielen lieben Dank. Was habt Ihr alle mit der Drehzahlen? Die Frage gab es hier schon, keine Ahnung, ist mir auch voll egal, ist etwas zwischen 2000-2200.
What? Rapids have probably the best sound of all the blades we've tried. And they are not louder then an average other blade. Yes, I have 690 on nitro, and I had 700 in the past as well.
I can't compare to other brands as I only use SLS. Well with the exception of Banshee where I use mylipo because of the form - it's easier to fit 5000mah in.
Keine Ahnung, ich fliege nach Prozenten im Regler, genaue Drehzahl interessiert mich nicht. Ich schätze die erste knapp unter 2000, die hohe etwas um 2100.
Wonderful flight from Start to Finish. Lovely maneuvers, the spinning pirouettes in the middle of your flight was very nice! Thanks for sharing, especially from the other side of the Camera.
😍👍🚁😍👍
Very nice flight 👍🏻smooth and precise 🤘🏻
oh, wow. what an elegance!
Thanks JC :-)
It was a nice flight!...lots of skills!...Thumbs Up!
Really nice !!
Thanks :-)
Very Smooth flying
Thanks. Always flying, always improving :-)
Super schöner Flug. Habe fast das gleiche Setup in meinem T-Line. Die Rapids sind bisher die besten Blätter, welche ich getestet habe. Komme mit dem TS Gain trotzdem nicht höher als ca. 55.
Maravilla cómo vuela usted
Quick question Michal! Do you run Vbar on this heli? If so, what is your main rotor gain? I am finding I am running a very low gain, around 40, to stop the head wobbling on stops. Perhaps it will disappear once the dampeners (C - hard) wear in.
I use NEO and VBarControl on all my helis.
Main rotor gain depends on many factors, but 40 sounds to be really low. Check the distance on your servo horn where you put the ball link. Is your spindle true? Is your governor too aggressive, that is often the case for new NEO-gov users. Cyclic throw setup near 100? Did you trim and optimize?
Apart from possible mechanical/setup issues, I often see the pilot itself being the reason for wobbles on stops - pilot's skills in combination with a very agile setup. Higher cyclic agility usually requires more expo. More expo as well helps quite a bit with some blades or even servos.
Beautiful. But you need a landing pad lol:)
Hi Michal
Mega schöner Flug ,was fliegst du für Drehzahlen in dem Video?
Hi JG, vielen lieben Dank. Was habt Ihr alle mit der Drehzahlen? Die Frage gab es hier schon, keine Ahnung, ist mir auch voll egal, ist etwas zwischen 2000-2200.
Nice
Cool geflogen.
Welche Kopfdämmpfer hast du drin.?
Das Video ist paar Jahre alt 🤷♂️ ist sehr wahrscheinlich die Standard Dämpfung aus dem Kit.
Alles voll im Griff👍🏻
Vielen Dank Wolfgang :-)
Hey buddy how Does that 700 sport fly Compare to the older goblin700s
Better as never before :-)
wow, those Rapids scream so loud! Have you tried 690's?
What? Rapids have probably the best sound of all the blades we've tried. And they are not louder then an average other blade.
Yes, I have 690 on nitro, and I had 700 in the past as well.
perhaps it's based on RPM, but my VTX feels much more silent, so I agree with you...
Very nice fly! what rpm do you use?
Thanks. Initial rpm somewhere just under 2000, later on around 2100.
What do you think of SLS batteries?
I can't compare to other brands as I only use SLS.
Well with the exception of Banshee where I use mylipo because of the form - it's easier to fit 5000mah in.
Mir würde es schon reichen "Normal" Fliegen zu können :D Nicht Schlecht ;)
Hi welche Drehzahl ist das ? Lg
Keine Ahnung, ich fliege nach Prozenten im Regler, genaue Drehzahl interessiert mich nicht. Ich schätze die erste knapp unter 2000, die hohe etwas um 2100.