Hi there, it’s really easy to do. load and take your portafilter and lock it into the group head. Then hold down the * button (right hand side of touchpad) for about ten seconds until the LEDS light up. Press the button you want to programme and then press the button again when you have the desired amount of coffee in the cup. Leave the touchpad for anoit 15/20 seconds and it will exit programme mode automatically. Your dose should now be set! Best of luck, let me know how you get on!
Werner Slabbert You need to hold down the 'star' button on the right hand side of the touchpad for about ten seconds, all the lights on the touchpad will then light up. You programme the hot water outlet by pressing the 'star' button (this will start the water flow) and when you have the right amount press the 'star' button again to stop it. Turn your machine off and on again to lock the programme in. Hope this helps :)
Werner Slabbert Errmmm this is just from memory so I might be wrong but as you are looking over the front of the machine, look at the back of the touch panel towards the bottom right hand side. There will be (I think) two small plugs - one will have a wire plugged in going to the probe at the top of the boiler, and the other is for the tea outlet. They plug is very small, about 4mm wide and only fits in one way.
![[DRIP] ‘Woke Up In Tokyo (RUKA & ASA)’ PREVIEW](http://i.ytimg.com/vi/QN44lcR_VkI/mqdefault.jpg)
Can it's extract both 2 cup for 1 time?
Is this similar to the g10?
Hello! tell me, how can I change the dose of espresso? Now it's 22 ml, I need 30 ml.Thanks!
Hi there, it’s really easy to do. load and take your portafilter and lock it into the group head. Then hold down the * button (right hand side of touchpad) for about ten seconds until the LEDS light up. Press the button you want to programme and then press the button again when you have the desired amount of coffee in the cup. Leave the touchpad for anoit 15/20 seconds and it will exit programme mode automatically. Your dose should now be set! Best of luck, let me know how you get on!
Thank you!!)
Bonjour monsieur je viens d’acheter le mini compact 2groupes sans écran. Comment mettre et régler là pré-infusion ?
Hi Ryan
nice refurb, can you tell me how you program or connect the water wand on the second keypad( for continuous tea/infusion?
i'm kinda stuck here
Werner Slabbert
You need to hold down the 'star' button on the right hand side of the touchpad for about ten seconds, all the lights on the touchpad will then light up. You programme the hot water outlet by pressing the 'star' button (this will start the water flow) and when you have the right amount press the 'star' button again to stop it. Turn your machine off and on again to lock the programme in.
Hope this helps :)
thanx for that Ryan, could you perhaps tell me where i connect the wand's wires on the pad?
Werner Slabbert
Errmmm this is just from memory so I might be wrong but as you are looking over the front of the machine, look at the back of the touch panel towards the bottom right hand side. There will be (I think) two small plugs - one will have a wire plugged in going to the probe at the top of the boiler, and the other is for the tea outlet. They plug is very small, about 4mm wide and only fits in one way.
_lh3.googleusercontent.com/l1dAlP9pLN1NHLipJw0ghyXFd9LYuhA0dO8oK02BnZCNVb79nZkWc-wEuOKFkmBaR-RKGWr4_
me@expobar.stuck contact me here then i'll give you my real email please ryan, you are my last hope