@@ChrisMaj ya that’s always my issue too. You have to cool it off. Maybe do 1 dry shallow fast pass for every 4 or 5 wet passes? You wouldn’t be destroying the tool but you’d still be able to show your progress
There's just somehting about big machines and being able to move all of that material, I can't get enough of them, I'm fascinated with how they work and seeing someone making these crazy parts is pretty gratifying!
Hello, sorry to bother you. We sell all kinds of steel and metal materials in sheet and round bar, such as P20, 718H, S136, S136H, NAK80, Cr12Mov, SKD11, D2, DC53, H13, SKD61, 8407, FDAC, 1.2344, S50C, DAC, W6, SKH-9, ASP23, ASP30, ASP60, etc. We also have fine plate and vacuum heat treatment processing. We also sell aluminium alloys: 2A12, 5083, 6061, 7075 and other plates and round bars and seamless tubes.
If I could afford to be curious on that scale I'd get a second table for that machine and another blank for that drawing. I'd keep everything else the same but have the new table cut down so it has only just enough diameter. The question is whether or not that difference in momentum would change anything.
we use seco .032R wnmg 80 degree 432 tm3501 inserts for roughing 416 t castings for planetary gear shafts where i work. a lot of interrupted cuts going on plus the varying depth of cut with castings. have to use a new tip each cycle. finisher is an iscar .0156R vnmg 35 degree, forget the base number.. probably starts with 331, any suggestions on best brands for 416, stainless, and castings?
Video of machining on this gigantic (relative to what I'm used to) vertical lathe will never get old
there's even bigger ones have you seen those?
Great piece of turning and milling, especially liked the internal key milling attachment. 👌thanks for sharing 👍
Gorgeous job, keyway and all. Five-hundred kilos of chips! Wow! Thanks for letting us watch, Chris.
Are you still using FIX8 ...what is your latest feedback
Yeah, I still have it, but I like to use it for big stuff.
Крис, Ваша работа остается на том же самом, високом уровне - по отвествености и содежанию. А мастерство - оно видно даже в коротком ролике. Спасибо!
Timelapse would be pretty cool. Just one shot and see the whole thing whittled away.
It's hard to get a good time-lapse in this vtl. A lot of coolant spraying around and camera gets foggy.
@@ChrisMaj ya that’s always my issue too. You have to cool it off. Maybe do 1 dry shallow fast pass for every 4 or 5 wet passes? You wouldn’t be destroying the tool but you’d still be able to show your progress
Very nice work.👍What phone do you use to record the video?
Old samsung s20
@@ChrisMaj Guess which one I use.
@@CncFrezar S5?😅
@@ChrisMaj old samsung galaxy S20 😁
There's just somehting about big machines and being able to move all of that material, I can't get enough of them, I'm fascinated with how they work and seeing someone making these crazy parts is pretty gratifying!
Hello Chris. At about the 3:23 mark a bunch of coolant flows out of a passage and run around the chuck. What is that done for? Thanks, Ken
Chips wash down
Brilliant job as always mate👌👌👌
Nice bit of gravy
Hello, sorry to bother you.
We sell all kinds of steel and metal materials in sheet and round bar, such as P20, 718H, S136, S136H, NAK80, Cr12Mov, SKD11, D2, DC53, H13, SKD61, 8407, FDAC, 1.2344, S50C, DAC, W6, SKH-9, ASP23, ASP30, ASP60, etc. We also have fine plate and vacuum heat treatment processing.
We also sell aluminium alloys: 2A12, 5083, 6061, 7075 and other plates and round bars and seamless tubes.
I thought I was watching a different channel for a moment, before I realised your guarding is different.
I haven't posted any vtl work in a while.
Is it possible to see how that keyway and holes were made?
It was all done on the horizontal boring mill you see at the end, but I didn't get a chance to record it.
00:44 to 00:55 Somebody put that on an hour long loop! And I'd be fast asleep in 30 seconds! I find that sound sooo soothing.
If I could afford to be curious on that scale I'd get a second table for that machine and another blank for that drawing. I'd keep everything else the same but have the new table cut down so it has only just enough diameter. The question is whether or not that difference in momentum would change anything.
Starting and stopping the smaller chuck would probably save us a couple of seconds.
@@ChrisMaj Makes sense. I wonder if the cut performance would change much too.
✋🏼🇦🇺👍🏼
Great slow-mo shot.
Beautiful, as always!
we use seco .032R wnmg 80 degree 432 tm3501 inserts for roughing 416 t castings for planetary gear shafts where i work. a lot of interrupted cuts going on plus the varying depth of cut with castings. have to use a new tip each cycle. finisher is an iscar .0156R vnmg 35 degree, forget the base number.. probably starts with 331, any suggestions on best brands for 416, stainless, and castings?
I don't do a lot of stainless or castings, so I can't really help you with that.
👍👍👍
beautiful work mate.
Beautiful work as always.
👍
Looks eerily similar to the part I’m working on currently. Although that one is about 2.5x larger…
A Beautiful Job!
As always you’ve done good!
Pretty work!
Excelente!!!
Hello Chris!
Could you tell me the model of VTL?
Thank you for your videos
Yama Seiki GV-1600M
@@ChrisMajthank you!
Fantastische Arbeit
Nice job 👍
🔥🔥🔥🤩👌👍