3 Upgrades for the Kaabo Wolf Warrior.

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ธ.ค. 2024

ความคิดเห็น • 98

  • @simplelife3466
    @simplelife3466 4 ปีที่แล้ว +5

    im building a extreme scooter over the winter, steady doing the research now as we speak..well I type lol. subbed, mostly because I felt that was a extremely kind thing to offer in the vid which shows character ,down earth not stuck up or better then others type of you tuber. good content to boot...cheers mate!!!

  • @crotalus_4203
    @crotalus_4203 5 ปีที่แล้ว +4

    Looking forward to buying this beast in a couple more months when I have enough saved up. Keep up the great videos.

    • @GingerOnWheels
      @GingerOnWheels  5 ปีที่แล้ว +1

      Thanks 😊 . And you made a good choice in scooter. I don't think you'll be sorry.

    • @metaljew4456
      @metaljew4456 4 ปีที่แล้ว

      Crotalus_ 420 : I ordered a WW 11+ yesterday from Fluid Free Rides. They are shipping out the next batch 1st week in June. I can’t wait!!!
      BTW: Did you order your Wolf Warrior 11+ yet?? I know they are expensive but you get what you pay for. One of the main attractions for me to the WW is that stem. Engineered like no other. You do not want wobble or slop in the front end at automobile speeds.

    • @4nlimited3dition_4n3d
      @4nlimited3dition_4n3d 4 ปีที่แล้ว

      @@metaljew4456 It's not the best

    • @j1mmyb3n24
      @j1mmyb3n24 3 ปีที่แล้ว

      @@4nlimited3dition_4n3d what’s the best after a Rion?

    • @4nlimited3dition_4n3d
      @4nlimited3dition_4n3d 3 ปีที่แล้ว

      @@j1mmyb3n24 I meant the stem. The mechanism on the old wolf warrior tends to get wobbly.

  • @jakeb1778
    @jakeb1778 3 ปีที่แล้ว

    I fixed the latching mechanism bolts by using a generous ammount of blue loctite, and by generously greasing the bolt heads. So far so good, if they come loose I will try using some red loctite. Make sure you do not get grease anywhere you want the loctite to hold

  • @niteblaster1
    @niteblaster1 ปีที่แล้ว

    Brilliant video 😎
    I have a new wolf warrior X pro arriving tomorrow
    I'll do the bolt thing lol
    I'm thinking of fitting a thumb throttle, I've never used a trigger throttle, i got a feeling it's going to make my hand ache ,
    Is it possible to change the throttle?

  • @strykerf27q1983
    @strykerf27q1983 3 ปีที่แล้ว

    Great video Ginger. I’m going to do this on the new Wolf King (gold) that I just preorder from voro . Thanks from up here in the Catskill mountains

  • @mohsan5699
    @mohsan5699 3 ปีที่แล้ว

    Christmas lights for night very cool where do you plug it in for power?

    • @GingerOnWheels
      @GingerOnWheels  3 ปีที่แล้ว

      Its just got 3 triple As. Lasts about 8 hours.

  • @OutdoorsIQ
    @OutdoorsIQ 3 ปีที่แล้ว +2

    Just be careful using stainless, as it’s a common misconception that stainless is harder then steel. Ideally you would have hardened steel fasteners which would be significantly stronger then stainless.

  • @raheemmurray168
    @raheemmurray168 3 ปีที่แล้ว

    Would u happen to know the size of the power button for the led stops on the kaabo wolf warrior I damaged mines🤦🏿‍♂️🙏🏿🙏🏿🤞🏿

  • @hi-tych
    @hi-tych 4 ปีที่แล้ว

    Good video man.

  • @williamperez5537
    @williamperez5537 2 ปีที่แล้ว

    Your breaks are fine? On my Wolf the front stop on a dime and the back break drags a bit. Makes it scary to stop fast.

  • @cardwellthomas3065
    @cardwellthomas3065 ปีที่แล้ว

    Hi I had a question.. Would the 72v 35ah wolf gt battery fit in a wolf king 11 plus.

  • @BizzarFunker
    @BizzarFunker 3 ปีที่แล้ว

    Get a longer bolt and put it all the thrue if possible

  • @ShraSsful
    @ShraSsful 4 ปีที่แล้ว

    Thank you for your advices. I did all of them.
    I wondering if we can put glue on the hold mecanism. The Aim it s to avoid metal destruction. Sry for my english

  • @alitavakol4393
    @alitavakol4393 4 ปีที่แล้ว

    Can you please do a video on how you got the rubber fork covers on?

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว +1

      I'll try and throw that tidbit into the video I do on repairing the wolf warrior :)

    • @alitavakol4393
      @alitavakol4393 4 ปีที่แล้ว

      @@GingerOnWheels Thank You! Hope you recover well

  • @FUNKYLOCK
    @FUNKYLOCK 5 ปีที่แล้ว

    U made that locking mechanism fixture look easy . But I definitely think that would be the main bolt to change well done ging..... how did get the bars to stay up while the locking bolt was out ...

    • @GingerOnWheels
      @GingerOnWheels  5 ปีที่แล้ว

      Thanks again. My handlebars just stayed up no assistance required due to the motorcycle jack, when the front wheel isn't touching the ground there is nothing pushing them down.

  • @brandoncote2318
    @brandoncote2318 2 ปีที่แล้ว

    Screw dimensions?

  • @pierrefitch
    @pierrefitch 4 ปีที่แล้ว

    what size bolt are all those stainless steel can they be ordered on amazon

  • @yogadude1234
    @yogadude1234 5 ปีที่แล้ว

    Another good video man. I wonder how much those pieces cost and why the company does not adopt them?

    • @GingerOnWheels
      @GingerOnWheels  5 ปีที่แล้ว +2

      They cost a few bucks, tops. And the company doesn't adopt them because in China the motto is 'how cheap can we make this while still avoiding returns". Can't return a scooter if you're dead.

    • @michaelsha2781
      @michaelsha2781 5 ปีที่แล้ว

      @@GingerOnWheels come on if everything is cheap, let us build scooter together

    • @CallHimVick
      @CallHimVick 4 ปีที่แล้ว

      Michael Sha shouldn’t cheap out on critical stuff! I wouldn’t mind paying more and buying this scooter if i hadn’t heard about the bolts flying off

    • @michaelsha2781
      @michaelsha2781 4 ปีที่แล้ว

      @@CallHimVick well noted, thanks and appericate

    • @rxonmymind8362
      @rxonmymind8362 4 ปีที่แล้ว +1

      Wish Tesla made this in the USA. It would fly off the shelf. But to him it's not dignified or something like that.
      Let's make a blow torch! ..

  • @andreyttg
    @andreyttg 5 ปีที่แล้ว

    fine.
    Already tighter )

  • @jrocrcpower5949
    @jrocrcpower5949 3 ปีที่แล้ว

    Hello ginger on wheels , I just received my brand new ww11.
    I’m having an issue with it not powering on.
    What can this be.
    I’m so sad please give me some advice if you have any. Thank you

    • @GingerOnWheels
      @GingerOnWheels  3 ปีที่แล้ว +1

      What do you mean? Like you plug the charger in and the light turns green. Then you hold the power button on the throttle and it doesn't turn on at all?

    • @jrocrcpower5949
      @jrocrcpower5949 3 ปีที่แล้ว

      @@GingerOnWheels
      Yea it turned on the first few rides, at first it cut off when I turned the front lights on it would die.
      Now 2days later it’s dead in the water .
      It won’t turn on at all. The only thing I can get to work are the side leds

  • @usm7924
    @usm7924 4 ปีที่แล้ว

    awesome video bro. where did you pick up those fork guards?

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว +1

      A link to the fork covers is in the description of my latest videos. Sorry to make you navigate, I'm on my phone.

    • @usm7924
      @usm7924 4 ปีที่แล้ว

      Ginger On Wheels haha no worries thanks for following up 👊🏽

  • @ZOMBuckaCurt
    @ZOMBuckaCurt 4 ปีที่แล้ว

    My stem and folding mech are making a cracky creaking pop sound when i put pressure on the front

    • @ZOMBuckaCurt
      @ZOMBuckaCurt 4 ปีที่แล้ว

      Any idea how to fix the creaky shit sound ive been getting?

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว

      Dm me again on Insta with more details, we can get it solved I'm sure.

  • @metaljew4456
    @metaljew4456 4 ปีที่แล้ว

    I see you chose to use stainless steel screws...why not go with GRADE 8 BOLTS?

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว

      A few reasons. These, even though they were cheaper, we still plenty expensive. They are already much stronger than I needed. And also I would've had to wait for backordered parts, so, another trip to the store.

  • @TheLondonCyclist
    @TheLondonCyclist 4 ปีที่แล้ว

    How's your suspension on the wolf doing? I heard you mention it was fucked...

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว +1

      Video on that coming soon. It's not 'fucked' but it's definitely not as springy as it was before.

  • @bombfirst1able
    @bombfirst1able 4 ปีที่แล้ว

    Question Ginger I have the same problem with the locking mechanism with my wolf what can I do before I return it I have the death wobble on the wolf how did the latch pin upgrade work for and the two sides screws

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว

      I'm not sure, you'd have to show me a video. Are you on Instagram?

  • @mlastudioproductions
    @mlastudioproductions 3 ปีที่แล้ว

    Just purchased my first Wolf Warrior with4 miles on it fromthe showroom floor. Have you ran into steering column wobble/play? I've made adjustments per the FluidFreeRides video and I still have unsafe wobble.

    • @GingerOnWheels
      @GingerOnWheels  3 ปีที่แล้ว

      Yes I have. Must be fixed before you can ride safely.

    • @mlastudioproductions
      @mlastudioproductions 3 ปีที่แล้ว

      @@GingerOnWheels I fixed it, no more wobble after adjusting the barrel nut and adding an eye bolt to replace the safety pin.

    • @mlastudioproductions
      @mlastudioproductions 3 ปีที่แล้ว

      Have you had the rear motor overheat in single motor turbo mode to the point of blowing the rear tire? It's a safety hazard if you ask me. I'll talk with Kaabo, VoroMotors and FluidFreeRides about the issue

    • @GingerOnWheels
      @GingerOnWheels  3 ปีที่แล้ว +1

      @@mlastudioproductions I may have. I got a flat on my Mantis and the motor was REALLY hot but I was also going pretty hard offroad

  • @JamiePineappleWyatt
    @JamiePineappleWyatt 4 ปีที่แล้ว

    Hey man, I would go as far as to say this is NOT exclusive to the wolf, for the most part, this could be done to all folding mechs with inferior bolts :)
    I know that the locking pins should stretch over time too due to being the same quality ;) (edit) lol I’ve really got to watch whole videos by commenting, but I miss too much if I don’t do it the whole time lol, noticed you actually resolved this issue with the hoop bolt)
    Last thing I ever want to touch on, but will, is metal mixing, it’s a 7070 Aluminum frame v a stainless 404/303?(don’t remember stainless numbers anymore for some reason).
    Any issues you could foresee with that and solutions? Perhaps silicon coating or going with better aluminium bolts?
    Locktite on the inside of the shim should be okay, as long as it doesn’t get on the outside, pre-lubricating the shim with any grease or even silicon spray WITH YOUR FINGER NOT THE CAN (you have that on hand usually and actually introduced it to me) the outer surface before inserting it to ensure prime operation
    And if anyone’s looking to waterproof a hot at motor the red rtv compound (gasket goop) made by locktite that is rated for 400 degrees c is perfect for controllers too, not just the head or tappet cover over a petrol/Diesel engine);)
    (Edit 10000000) I’ll be adding that front guard to the Gtr v2 when it shows up, I’ll end up getting a bunch of matting before it shows up, maybe even checkerplate Aluminum if I can find off its at the hardware for free again :3

    • @JamiePineappleWyatt
      @JamiePineappleWyatt 4 ปีที่แล้ว

      Jesus Christ I hate my iPhone and it’s laggy keyboard.
      Someone please kill it with fire.

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว +1

      🤣

  • @Maykay1312
    @Maykay1312 3 ปีที่แล้ว

    i think the zero 11x is beter only thing u need to upgrade are the clamps to thicker ones and ur done replace any screws that are getting rusted put some thread locker on new screws and ur done

    • @GingerOnWheels
      @GingerOnWheels  3 ปีที่แล้ว

      It depends on your use case, but for street riding you may be right. For offroading though, the Wolf definitely wins.

  • @blakeyboyx
    @blakeyboyx 4 ปีที่แล้ว

    Any luck on finding the 2 stainless steel screws for the latching mechanism online?

  • @eddiekytia
    @eddiekytia 4 ปีที่แล้ว

    Do you remember the size for the 2 latch screws

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว

      I don't recall, I'm sorry. I'd have to pull them to find out again. :/

  • @johndanielpasco4072
    @johndanielpasco4072 4 ปีที่แล้ว

    what is the size of two bolts ? Thanks

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว

      I believe they're size 6 hex screws.

    • @waylandsmith235
      @waylandsmith235 4 ปีที่แล้ว

      @@GingerOnWheels What thread? A1? I'm thinking of getting one of these badboys but i need to order those first bolts online so thread size would be greatly appreciated if you know!

  • @erickp.6855
    @erickp.6855 3 ปีที่แล้ว

    I speak only french here in canada but men!!... i just want to let you know you really make me laught loud when i figure out how your name " ginger.on.wheel"sound in french hehehe i knew then you must be bilingues too hehehe anyway its a very cool name for your chanel...good-luck with it!!

  • @paulsalonikas3625
    @paulsalonikas3625 4 ปีที่แล้ว

    Do you still have any screw kit for the wolf warrior? I missed that video..

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว +1

      No I actually ended up refunding everyone that bought a screw kit because I got some serious pushback from the manufacturer. I can't recommend that anyone replace their bolts anymore (even though I personally believe them to be counterfit 12.9 screws and I still run stainless steel screws on my scoot with no issue).

    • @paulsalonikas3625
      @paulsalonikas3625 4 ปีที่แล้ว +2

      @@GingerOnWheels Wow .. i will definitely look up to replace them when i'll got mine wolf. And i always hope not having any issue with the front fork. Here in Greece there is no authorized dealer so if any problem happens I have to finger it out on my own. But, i still love that scooter. Anyway, i feel sorry about how your effort ended up with the kit.

  • @mi5veezee
    @mi5veezee 3 ปีที่แล้ว

    Not a shim but a bushing.

  • @MotorcrossRacer1
    @MotorcrossRacer1 4 ปีที่แล้ว

    great sweater..........was that you christmas present to yourself..........x-mas eve

  • @jamesyurky3048
    @jamesyurky3048 3 ปีที่แล้ว

    That’s not a shim on that bolt it’s a bushing, should of dapped a little grease on the threads where the bushing rides and loctite on the very end of bolt.

  • @lanceguilin
    @lanceguilin 4 ปีที่แล้ว

    Hi Ginger. Are you still planning to publish a review on the WW11+? There are actually other sellers in the USA that sells the Kaabo WW11. I didnt' know that until very, very recently. Kreo is one of them.
    kreomotors.com/product/kaabo-wolf-warrior-11/
    was FluidFreeRides pushing back on you with respect to the screw kit, or was Kaabo in China/Philippines pushing you?
    Do you still recommend getting the WW11 from FFR or are you done with them?

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว

      Oh wow, I thought Kreo was only in Europe, that's cool! I am very happy with Fluid Free Ride though, they have been nothing but great to me, even in this pandemic they are still answering emails and helping me out with getting some new brake pads. The screw kit, it was mostly Kaabo asking questions and telling me that their stock screws were stronger than the one's I'd sourced, then the advice of my lawyer who said if anyone hurt them self using my bolt kit, I'd be liable.

    • @maxgarascia
      @maxgarascia 4 ปีที่แล้ว

      So to protect my yourself from liability make a disclaimer video telling people if they modify their machine it's on them.

  • @reid-qo2sz
    @reid-qo2sz 3 ปีที่แล้ว

    ??? Why not hi Tencel. ... why stainless ..

  • @johnward7748
    @johnward7748 5 หลายเดือนก่อน

    No sound

  • @antoninoarrigo2331
    @antoninoarrigo2331 4 ปีที่แล้ว +1

    Mate that front mudguard looks stupid 😝

  • @flashkandy
    @flashkandy 4 ปีที่แล้ว

    Would you be willing to sell me the screws in the video?

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว +1

      Sure. What's a good way to contact you to work out details?

    • @flashkandy
      @flashkandy 4 ปีที่แล้ว

      Nopatience@gmail.com

    • @flashkandy
      @flashkandy 4 ปีที่แล้ว

      That really is my email address.

  • @gumrickzimmermann9605
    @gumrickzimmermann9605 3 ปีที่แล้ว

    Hey you should hook me up with A Kaabo Wolf Warrior that would be sick

  • @mi5veezee
    @mi5veezee 3 ปีที่แล้ว

    Just dont fold it. Stick it in the trunk upright hold it in with blanket and bungy or get 1 bolt that fits all the way through and put locking nut on one side but leaving enough for the slight spin.

  • @ZOMBuckaCurt
    @ZOMBuckaCurt 4 ปีที่แล้ว

    I bought a wolf warrior and regret it so bad its a huge waste of money for the build qaulity

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว

      You're joking...? What's wrong with it? Compared to other scooters it's build quality is a 10 imo

    • @ZOMBuckaCurt
      @ZOMBuckaCurt 4 ปีที่แล้ว

      @@GingerOnWheels at first i loved it and i followed alot of ur tips and i loctited some stuff but now the thing is making the most awful creaky pop sounds and ive tightened the folding mech but its not changed it at all

    • @ZOMBuckaCurt
      @ZOMBuckaCurt 4 ปีที่แล้ว

      @@GingerOnWheels i wish i could show u the sounds and get some help but i posted in groups on fb and everyone said its probably a loose folding mech and i tightened it right up and still hasnt changed

    • @GingerOnWheels
      @GingerOnWheels  4 ปีที่แล้ว +1

      @@ZOMBuckaCurt upload a video a link me to it. Or show me on Instagram dm @gingeronwheels and hopefully we can get your scooter sorted.

    • @ZOMBuckaCurt
      @ZOMBuckaCurt 4 ปีที่แล้ว

      @@GingerOnWheels ill dm you instagram for sure