Dremel EZ Lock Cut Off Wheels 👍😎👍Demonstration/ Review
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- Amazon Link to EZ Locks-
amzn.to/4btdi0D
If you should choose to use the convenient link provided above , I will receive a small commission from Amazon at no extra cost to you! Thanks -Kev 👍🥫👍
I found these Dremel Tool Cut Off Wheel’s and Mandrel to be extremely well engineered. They sure beat the old Dremel wheels I’ve used before.
I tried to respect the wheel by not getting it too hot at one time… in other words,I took my time. I couldnt have veen happier with the results. This is definitely found a place in my toolbox! a great alternative to happen to get out the 4 inch angle grinder when doing a small job!
Thanks Again -Kev 👍🥫👍
Thank You Everyone💯 for supporting my channel 👍🥫👍
😊
Great demonstration and review. 👊😎👍
Thanks Boyd! Appreciate the awesome support! 💯👍😎👍💯
Thanks for the demo Kev . I really like this set up way better than the little screw in the middle !! 👍🏻
Exactly Del! I’ve broke a lot of that type! 👍😎👍
Hey Ken, Thank you for the example and sharing of information. Dremels are such cool little tools and can be used for so many different projects. 👍🏻☺️
Absolutely agree! I bought the “flexible shaft” for the Dremel years ago! Obviously it has to be mounted higher in the air! But the precision it offers by having a smaller tip is awesome! Thank You!
Thanks for sharing, Kev. Good info to know. 👍👍👍
Thanks Ed! 👍😎👍
I like the way it holds the wheel. That is cool. Nice demo.
Yes, definitely a very neat design thanks RFL! 👍
Thank you for sharing your knowledge!!
Nice share ❤❤
Thanks for stopping by👍Very appreciated👍🥫👍
Love doing small stuff with my Dremel, Have a great day.
Thanks Louie! It comes in handy! 👍
This looks like a very good upgrade. My knock off kit has these wheels that powder in milliseconds,dremel wheels would obviously pay for themselves in no time. Thanks for sharing!
You’re Welcome! Thanks for stopping by! 👍😎👍
The comparatively small amount of wear for what you put it through is impressive. It shows that a good tool is worth the extra money. Cheers Kev, that's good stuff mate.
Thanks Mark. I was thinking the same thing! Take care. 👍😎👍
Cool Dremel EZ lock cutoff tool Kev👍😎👍
Thanks Paul 💯👍😎👍💯 It is very cool 👍😎👍
One disc to do both jobs That's pretty good.
And still plenty left! Thanks Robert!
👍🍷👍
That is cool 😎
Thanks! 👍😎👍
Awesome video brother. Thanks for sharing. That is an amazing tool. Thanks for sharing. Keep the content coming. Hope you have an incredible day. Much love and RESPECT
Thanks Tim! It’s a game changer when compared to the old Dremel cutting wheels!
👍😎👍
Thanks Kev, going to order tonight 👍👏🇺🇸 Rick
Thanks Top👍🇺🇸👍 I’m sure you’ll be pleased! If not, I’ll knock out about 25 of them for you! 👍🇺🇸👍
@@Kevscancave 🤣 LMAO……..I’m sure it will be an awesome addition to the tool bin Hoooah !
I know a guy who uses these all the time and they are awesome! Let me say the extra thin wheels are great but spendy imo.😃
Absolutely💯 Thanks Smitty👍😎👍
I don't use a Dremel everyday, but when I need one, I'm sure glad we have one.....I like it....Thanks Kev.
They do come in handy for sure! Thanks Brent! 👍😎👍
Dremel's are extremely versatile.
All the accessories, and attachments adds up to one very handy tool.
@davidgraham2673 Absolutely agree! Good stuff! Thanks David😎
You did a lot better than me with those wheels. I was trying to cut a hole in sheet metal and the first cut off wheel wore out really quickly and the second one had the center break out right after I put it on. Right out of the package.
Wow … I’d say so! I just took my time
👍🤓👍
@@Kevscancave I was taking my time.
@NathansMoparGarage That stinks! 👎
4👍Very beautiful video!🎉❤ Thank you for nice sharing my friend!
Thank You very much! 👍😎👍
Wow that little tool is a beast. “Hello Santa please add it to my list “
It did a great job! Great for tight areas👍Thanks Spanky! 👍
Nice video 👍👍👍
Thank You very much! 👍😎👍
Dremel EZ Lock Cut Off Wheels , THANK FOR SHARING, FRIEND
You’re Welcome Thank You👍
Awesome review Kev!
I have a small dremmel with 1” cut off wheels for those hard to reach places, it works good. But I think it’s time for an upgrade!👍🏽
Thanks for sharing!
I can only speak of my personal testing and prior Dremel wheel experience. I was extremely pleased… having said that, it wasn’t just the cutting experience, but that mandrel with its clenching type design was impressive! I’m a skeptical person.. when it comes to claims manufactureres make … Dremel proved itself worthy!
Thanks Matt! 👍🥫👍
@@Kevscancave thanks again!👍🏽
Every time I see Dremel I think of Lil derby cars Cub scouts used to have
Pinewood Derby👍💯👍🏕️👍
@@Kevscancave yeah that's the name of that. I could not think of it pinewood derby. I remember my first born he who gets to me because I'd help some of the other kids and he wanted to win so bad. But let me add this. I got a little bit older and he go across the wholesale club Walmart parking lot whatever it might be. Just to help them put their groceries in their car. Then he said one time Dad we need to follow him home. I'll spare you to conversation but the man did not expect us to do this. I asked my son why? How is he going to get them into his home? Great thoughtfulness. He was that way all his life.
That's beautiful best wishes
Everyone
Thanks so much! Have a great weekend 👍😎👍
Good Evening 🌃 Here To Support You 👍 Nice Sharing Have A Nice Evening Greetings
Thank You very awesome 👍😎👍
I don’t have a Dremel, but I will soon. Thanks for the demo. 👍🏼
Cool 👍😎👍 Thanks OBG!
13 like good ❤
Thank You very much! 👍😎👍
Beautiful my friend 🙏🙏🙏👋👋👋👍👍👍👍❤❤❤❤
Thank You very much! 👍💯👍
@@Kevscancave 👍👍👍👍❤❤❤❤❤
Dremel EZ Lock Cut Off Wheels 👍😎👍Demonstration/ Review, THANK FOR SHARING, FRIEND
You’re Welcome Thanks for stopping by! 👍😎👍
Very good tool review by practicing the use of the tool
Exactly Thank You 👍😎👍
Thank you I learned a lot watching your video.
Thanks Micky👍😎👍
So beautiful my friend❤❤❤🙏🙏thank you very much 💕💕like 45
Thank You very much! 👍😎👍
Thanks for the demo my friend
Thanks Thani!
As much as I have used Dremel, I have never saw these! I'll have to get a few of these. Thanks for sharing.
You’re welcome Dennis they sure are an improvement compared to the old cutting wheels! Thanks!
great job, thanks for sharing, have a great day 👍
Thank You very much! You Too!
Thanks for the demo kev my friend
Thank You Thani for your support! 😎
Hello my friend! It's a wonderful video, I enjoyed watching it 👍
Hello! Thank You so much👍😎👍
Very good tool reviews, such as those for motorized vehicles
Thank You very much! 👍😎👍
I will need to get that kit for my dremel. Like you said love the design, and vey useful where you need finesse to cut something.
Exactly! Thank You! LHWS! 👍👀👍
Hi Kevin, I broke away from your video for a bit and ordered the dremel disc’s and Chuck, and spare disc’s, then came back and finished the video, very impressive thank you for sharing 😆😆
You’re welcome Mike! Great for hard to get to places!
@@Kevscancave yes, i should be receiving mine tonight and putting it to use in the morning
@@DesertRatFabrication Awesome! 👍
Hey Kevin , I got my Dremel w/ EZ lock and 5 spare disc’s they are so awesome
@@DesertRatFabrication Awesome Im still on my first disk. Cut two more motorcycle chains in half with it today.
As long as you don’t go crazy, The disk seems to last a while !
That disk lock arbor I is a Awesome idea ,I've never seen that before ,,nice,👍 👍
It works great! Thanks Anthony! 👍
That really looks neat.
Now I need to dig around and see what Dremel tools I have. This is really cool.
I use grinders when a staple or nail goes astray. Staples would give up easy to that Dremel EZ Lock
Thanks DAwR! I bet you have some!
Awesome sharing, interesting video 👍
Thank You! 👍😎👍💯
Some good information, great sharing, blessings
Thanks Arelee! 👍😎👍
Wonderful video dear ❤
Thank You very much! 👍😎👍
I LOVE these cut-off wheels.
Used them all the time.
Way too expensive though, for how little time they last.
@davidgraham2673 Thanks David! I’m just a hobbyist. They won’t see a ton of use. I’m curious, do you just use a 4” wheel most of the time? Or do you use the cheaper ( price wise) Dremel size cut offs…I also have no issue using a hacksaw!
@Kevscancave , I did custom work on metal door frames, and metal doors if needed during my construction days.
The small size allowed me to do tight work.
They're proud of those cut-off wheels. They're very expensive compared to a thin metal cutting disc, and how much longer they last.
Gotcha! Awesome David. Thanks for sharing that! 👍😎👍
Way to go Brotato!!
Thanks! 👍🥔🥔👍
Hey Ken, I came back to order me a set of these. Just letting you and others know that your link works!
Thanks Dennis! I was just outside using them again… they really get into small areas! Thanks!
Dremel...si kecil yang yang sangat bermanfaat untuk memotong besi baja
Thank You very much! 👍😎👍
Watching my friend 🎉
@@thanitechchannel Thanks for your support Thani 👍😎👍
Interesting 🧐 🎉
Thank You! 👍😎👍
Chia sẽ thực tế cảm ơn bạn
Thank You very much! 👍😎👍
Watching my friend
Than You very much Thani👍😎👍💯
Your Dremel is bogging down willie!
@brilog69 Ha ha 👍😝👍I tried to keep the RPM’s down 👍😝👍 Thanks B! 😎
That ziptie trick is cool. ( I know I know...I'll sit down and pay attention )
Ha ha! “Dummy Cords” work also. I think a garbage can lid makes a great keyring also… just a bit cumbersome.. but you won’t lose whatever it’s attached to it! Thanks DAwR! 🔑
Hûn xebateke baş û berdewam ava dikin, em hêvîdar in ku hûn serkeftî bin, bi van beşdariyan ez bawer dikim ku hûn ê pir bi bandor bin, ji we re serkeftinê dixwazim.
Thank You very much! 👍😎👍
Vidio bagus sekali saudaraku
Thank You very much! 👍😎👍
공구와 연장에 관한. 친구의
영상을 응원합니다
❤❤❤🎉🎉
Thank You 👍💯👍😎👍
your zip tie on your chuck key good idea , did you use heat shrink to make the loop?
it's hard to see it went by so fast. thanks for the video.
@davidparker3346 Great eye! Yes, I used Heat Shrink on the loop.. I was using the Dremel Daily for hobbies and had the chuck hanging close by! Thanks for your comment! -Kev 👍🥫👍
Semangat selalu kawan mantap
Thank You! 👍😎👍
good friend
Thank You very much! Appreciate it!
👍😎👍
Realistically, the Dremel doesn't have the beans to spin a large wheel like that. Check out the Foredom line; they make a Dremel seem more like a toy because they don't torque out.
Foredoms are incredible I agree! They were always the top choice with the power carving crowd in the 80’s -90’s when I was actively carving! A friend had one and it was a work horse! Thanks for your comments! 👍
L34 nice video, thank you for your review 15:38 full duration
Thank You very much👍😎👍 very appreciated!
So nice mashallah very beautiful friend 🎉🎉🎉❤❤❤❤❤❤❤
Thank You very much! I appreciate you stopping by! 👍😎👍
41❤❤❤Cool! 👀 👍
Thanks! 👍😎👍
💐🥀🥀🌹💐🎉💐☕🍰🍸🌼☂️ BEST FRIEND LIKE GOOD FAMILY YOUR CHENNAI
TOBA TEK SINGH PAKISTAN 👍
Thank You very much! 👍😎👍
Very nice upload,thanks for sharing.
Thank You very much! 👍😎👍
Awesome presentation. Another very good review. Must be a great item for you to be extremely impressed. I once helped my husband replace doorknobs. He replaced 7, and I replaced 1. I hated it, I can't seem to make it work. Took me an hour. Salute to you, you are very good in fixing things. Captain 🫡
Thanks Dee! The first door knob is the hardest! They generally get easier the more you do! Thanks for the story 😎
Watching my friend
Thanks for your continuous support!
@@Kevscancave ❤️❤️