Thank you for the comment. Regarding your question "why are the numbers descending", My analogy about that is because Resistance is inversely proportonal with Voltage. When voltage is increasing, Resistance is decreasing. I'm not sure really if this is what you meant in the question.
Calibrated volt\amp input by 1.5, 9volt bat. As source at incremental levels scales Each selector scale increasing or decreasing volt\amp relatively Answer measuring loss (absorbtion, use of not given back, energy to fill, energize) of a pre known \ set amount of energy introduced. (Volt\Amp) relative to the diff scales ohms law . Loss (used by resistance) is shown to the left of things. Although they could probably reverse it. But why add a process when these mass produced toys have a high enough +\- already. Resistance
What if a fully callibrated multi tester points in between two value? should I pick the highest or the lowest value? Ex: the pointer is in between 8 and 6.
Brand ba ang question mo? Or if digital or analog? If sa brand, sa company kasi nami fluke ang ginagamit. For beginners mas maganda pa rin na aralin talaga on how to use analog type of tester. Although mas convenient gamitin ang digital.
madam good pm. Can I use some of the images of your meter scale reading in my learning materials? Hope for your kind consideration. Thanks and God Bless!
well explained. Very easy to understand.. Thank you! Why are the numbers for resistance in descending order?
Thank you for the comment. Regarding your question "why are the numbers descending", My analogy about that is because Resistance is inversely proportonal with Voltage. When voltage is increasing, Resistance is decreasing. I'm not sure really if this is what you meant in the question.
Calibrated volt\amp input by 1.5, 9volt bat. As source at incremental levels scales Each selector scale increasing or decreasing volt\amp relatively
Answer measuring loss (absorbtion, use of not given back, energy to fill, energize) of a pre known \ set amount of energy introduced. (Volt\Amp) relative to the diff scales ohms law . Loss (used by resistance) is shown to the left of things. Although they could probably reverse it. But why add a process when these mass produced toys have a high enough +\- already.
Resistance
Ang laking tulong po ng Video nyo Sobrang linaw po ng pagkaka explain 🥰❤️
Clear explanation teacher, good job 👍👍🙏
Very clear, thank you.
Very nicely explained. Thks
very informative & impressive. now i know. Keep it up..thanx u!
Are you sure that 70 ohms X 1k ohms = 7000 ohms? my calculator said it is 70,000k ohms
Thank you for the correction.
thank you, the video was really helpful.
Your technique is simply Osama
Thank you po miss. hindi ko alam anong gagawin ko dito😂 sa module ko🤣
You are welcome. That's good to hear.
Thank you for teaching 😊😃😊
Well explained. Thank you
clip 6.42 x1=70 ohm x1k=7000ohm ? shouldn't be 70,000ohm just question
Very nice explained
Thank you.
Thank You next time again
THANK YOU VERY MUCH!!!
What if a fully callibrated multi tester points in between two value? should I pick the highest or the lowest value?
Ex: the pointer is in between 8 and 6.
Thank You Again
SEMBRANO, JOSHUA L.
BIT ELET 1101
also 120 ohms X 1k ohms = 12,000 ohms? or 120,000 ohms?
120,000 ohms
Thank u!
very nice video 1000 like
Awesome
i watched on how to read the voltage and its the same po ok how to read the resistance
thank you :)
John Vincent M Bantayaon
Thank you so much, you earned a subscriber
Clear explanation good job thanks much you save my day :-)
Good evening po. Ma'am what is the reading if the scale reading is 2k x 1k.? Thank you
Thanks po
Bakit po 2-10 ang gina base tapos sa next ay 10-20 na bat po putol2
Talaga bang 20 to 50 ang kailanga para mag compute? Or pwede ring 20 to 30?
is 0 -2 really 0.25 ohms not 0.2 ??
Thanks you for the comment. If you count the number of lines from 0 to 1, there are 5 graduation or lines. So 1/5 = 0.2 ohms.
Pano ung sa 1.4 ohms bat di na po siya dinivide?
One multimeter purchase your courier in Tamilnadu
Tanong ko lng po para sa amin na bagahan lng po anu po
Maganda tester na gamitin po namin thank you po
Brand ba ang question mo? Or if digital or analog? If sa brand, sa company kasi nami fluke ang ginagamit. For beginners mas maganda pa rin na aralin talaga on how to use analog type of tester. Although mas convenient gamitin ang digital.
Thanks really helped me
It's so nice to hear that.
tanung kulang just for clarification about from 2 to 10 it counts 16 lines so then how come it became 8 if 2 to 10 is 16,thank you in advance
If we count 2 to 10 is 8. And from range 2 to 10 have 16 lines, 8 divided by 16 is equal to 0.5.
@@electricitybasics1878 yes gets ko po but tanung kulang po we count start at 2 then it ends up to 10 pano po nakuha yung 8 ?
10 minus 2 = 8, kaya 8 ang nakuha
@@electricitybasics1878 ok thank you its clear now
madam good pm. Can I use some of the images of your meter scale reading in my learning materials? Hope for your kind consideration. Thanks and God Bless!
Sure po ma'am.
@@electricitybasics1878 Thanks po mam. God Bless po!
Bakit mali? Saakin 11 ouhms po sya pero ×100 edi 1,100 pero why mali?
Mam paano po malalaman any value of each graduation
May table po sa dulo, and itinuro ko din po sa video kung paano.
Tama po ba yung 12000 ohms?
Thanks for noticing... 120x1000 = 120 000 ohms.
Pinoy ka po ba mam?
yes sir.