SCX10 II - INJORA 313mm Wheelbase Chassis | UPDATE
ฝัง
- เผยแพร่เมื่อ 28 พ.ย. 2024
- #scx10 #axial #injora
Injora 313mm Wheelbase Chassis with Prefixal Single Speed transmission for SCX10 II.
In this video I installed the following:
Stock Traxxas Servo
Hobbywing Fusion SE 1800kV
Injora RX
Cantilever suspension kit
♪ Everyday (Prod. by Lukrembo)
Link : • (no copyright music) l...
Disclaimer!
Copyright Disclaimer under Section 107 of the copyright act 1976, allowance is made for fair use for purposes such as criticism, comment, news reporting, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favour of fair use.
th-cam.com/video/OZK0kVOydPw/w-d-xo.htmlsi=C1iuctQEztkJ5ROA
Hi guys, if you have a question about how I fit the 540 Fusion SE motor. Please check the link above
Looks very nice man, that Fusion SE seems to be really good! Great build for sure!
Thanks man! liked it so much that I purchased another one for my next project 😆
How is the e break does it hold
Thank you for sharing this great video! 👍😅😮😊
Thanks for watching 😄
What is the width from wheel to wheel? I want to buy that chassis and use those tires to put an Injora Comanche body on it, I think that with that body and those 1.5 tires it could look more realistic, can you help me give me specifications of this car
Thanks for watching! Yes 1.55" wheel is perfect for scale build. Width is 215mm plus depends on the rims and tires you are going to use. In the video the tires is 90mm*25mm so probably the width is plus or minus 220mm with that tires. Of course you can buy narrower tires.
All good info thanks.
Glad it was helpful! Thank you 🙏
YES SIIR! That's what I been searching for! I have the Everest 10 and already sunk quiet ALOT in upgrades, new Hobbywing Fusion quickrun SE 1800kv motor, RadioLink RC6GS v3 reverse steering kit ,Shock Keys one SiGP 7.4v 5100 2s 70c lipo, ZEEE 11.1v 5200 3s 80c lipo, SUPULSE B3 V2 10W Lipo charger, 22mm wheel spacers, 70 weight shock oil. I'm wanting to drop my Fusion in this SCX 10 and by the looks of it, it'll fit. But I also wanna install reverse steering it has helped my E10 tremendously when climbing. Is this reverse steering compatible? And did you have to modify anything to get the Fusion to fit? Great video my man.
Sorry but I'm not really familiar with the reverse steering 😅 but for fitting the Fusion SE, Yes I had to rotate the servo mount/bumper mount to have little bit of space to fit the motor
such a nice work and review buddy,. can you explain what is the thing that you've added since it crawl super slow... that's very nice.. i saw it between 540motor and the injora gearbox.. realy need that setup.. thnks
I used the Hobbywing Fusion SE 😁 its a 2in1 esc+motor combination which you can run slow with torque
@@gnrcfilms oh thanks for the guide mate.. really appreciate..
Forgive my ignorance. But I have that same setup and motor/esc combo. I haven’t received my scx2 kit yet but how did you fit the motor into the transmission housing?
Hello, can you please post what wheels and tires (and foams / inserts) you use ?
a.aliexpress.com/_oC1798g this is the one on the video 😁
@@gnrcfilms thank you.
What adapter use you to servo and motor fit perfect like video?
I made a video just for this 😁 see the pinned comment
What exactly did you have to trim?
Did you have to purchase a pinion or did the transmission come with one?
Its included 👍 even with the aluminum servo horn
@@gnrcfilms do you know if its a 15T or 16T?
@@johndionaldo9143mine were m7 x 15T
How has your transmission held up with a brushless motor?
Noisy 😂
whats the width of the axle?
What size cantilever you use?
not sure about the size sorry but its intended to SCX10ii
@@gnrcfilms already got the same as yours..hahaha. thz