Budget Switchback Sequential headlights for NBS Silverado
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- What’s up please be sure to hit that notification bell! Subscribe if your new!
Check out @fernsgarage9818 channel!
Headlights Jenuo No-Fogging Headlight Assembly W/LED DRL Sequential Turn Light Fit For 03 04 05 06 Chevy Silverado Avalanche 1500 2500 3500/07 Classic, Not Fit For Factory Cladding Body a.co/d/demIAkT
Music by my brother! Be sure to check him out!
/ cf5gdrrxvdxwhycy9
SHOP! 🛍️ Affiliate product links! Buy at a discount!
AUXITO® Car LED Lights | LED Forward, Interior & Exterior Lighting | Linktree
Code (2Clean) Save 15%
Auto Detailing Supplies | Car Care Products | Shine Armor | Linktree
Code (J2C) Save 20%
Don’t forget to like comment subscribe.
Email me for business inquires!
How’s the adjustment for them? Everything I’ve tried they won’t adjust high enough.
Good might want to mess w it I did the same when I first got them but then I went again the next week and for some reason the adjustment thread cought and was able to adjust the lights idk just kept spinning it and it worked
About to get these, went a little fast on the wiring part, probably cause I suck at wiring.😂 we will see what I can get done
Hope this vid helps
What gets plugged into the 194 bulb parking socket?
And do they have these headlight with the clear reflectors?
Not clear & the white strip that on headlights to turn on when parking lights come on
Purchased the lights and installed them wire the red and the white to the brown and the yellow wire to the blue and black to ground but I have no sequentials coming on. Can you help please?
By the way, for the yellow wire that went to the DRL plug, which would’ve been the white connector on the factory harness
@@elchulo6743 yea I’m not sure what could be the issue might be a bad ground wire or your headlights are defected from the seller ?
@@ToooCleann did you happen to tap the yellow wire to the brown turn signal socket or the white DRL socket
@@elchulo6743 the brown
any way to get personal help with these if you aren’t busy?
How those headlights been for the week?
Good no problems everything is clean I put some more adhesive on sides to make sure no moisture ever gets in them
@@ToooCleann yea I was thinking of going to Walmart and putting some sealer around the edges
@@shaggy_8016 you got ‘em ? there different I like that ! 👍🏼
Aye man can you help me with the wiring? I can’t with the top ones
The 2 new headlights connect w each other then connect to the truck headlights wiring. Read some comments . What’s your question
For everyone wondering about the wiring, I just put these in my truck and it’s super simple, on the bottom running light/blinker there are 3 wires coming from the socket- black(ground) brown(power) blue(blinker supply) on the headlights there are 3 wires- white/red is power, black is ground, and yellow is for the blinker. All you do is match them up and tap into each of those. I used quick inline taps for mine but any will do. Once again that’s black to black, red/white to brown, and yellow to blue.
I did exactly that and I can get the drl on but the turn signal is the white led doing the flowing motion but only on the bottom not up the sides, and I can get them to work correctly if I tap the yellow wire on a battery while the positive and negative and sitting there
Hey so I wired them in and only the amber turn singles comes on on hazards and the white led don’t work I don’t mean to be a pain but could you make a video or explain from every wire how you wired them because this video was too fast to see how to wire them and it was dark
Headlight Stock Parking
Wires Wires
Red white - Brown
Yellow - Blue
Black - Black
Thanks I appreciate it
All my wire are
Like that but no white
Oh so did you wire the quick
Connect to the parking lights
To get the whites
@@aaronmoon1623 you might have different ones then I had to cut the red quick connect wire that came with the headlight because the headlights didn’t work correctly so red went with the white wire to connect on parking light brown wire for power
Just asking does this have a start up sequence
Yes it does
Those lights are🔥
How these holding up after the first two weeks?
Good they still look new 👍🏼
is it spliced into the drl or head lights
Parking Headlights if u do the daytime driving light at night won’t come on. Splice into parking lights
@@ToooCleann thanks man. I hate wiring and not good at it but got them done tonight they look good.
4:35 🔥🔥🔥
Thanks bro 😎
yo brothers song fye asff
So where does the yellow wires and the red and white wires wire to?
Red & white to brown the yellow wires to blue & black wire to ground
I picked these up today, and as far as wiring, I understand it. But the weird thing I’m having is that, my sequential turn signal bar isn’t lighting up likes yours are, it lights up kinda slow, blinks differently, and it when I turn on the turn signals, they don’t change to amber. Is it because I’m using the quick connect?
Yea don’t use the quick connect
This is what you want to wire together on the jenuo headlight wiring. So main thing red quick connect cut and wire . The 2 yellows (top&bottom headlight wires) together. & the black on black wires together. After you set your headlight wires up. You wire the headlights to blue brown and black main headlights on your truck
@@ToooCleann thanks man, I got it all working now
I got the same brand, there’s no yellow wire there’s just white and black with the red and black on a quick connect on the bottom