Looks super simple when mounting to a demo board. What is the process for pulling power to the numbers when mounted to an actual home with stucco exterior?
Do you include the power supply? There is no mention of this on your website or video? It would be upsetting to order the numbers and not have all the required items.
humor. just casually glaze over the fact that you have to rip a large hole in your interior wall, deal with insulation, fish wire from a current circuit to the number location...
@@trailheadmedia5578 I have a hardware installation company and have installed mostly non lighted house numbers that mount the same as these for decades and have yet to have any problems, but I felt the same at first. I often have to install them on EIFS which seemed sketchy as it's mostly Styrofoam but they are all still there. Works good
Looks super simple when mounting to a demo board. What is the process for pulling power to the numbers when mounted to an actual home with stucco exterior?
For my curb side mailbox is there a stand alone power source? Does the power source need to be connected to something?
What is the recommended converter for a 10 inch led, 4 numbers?
I have a stucco wall. Need to know how to wire through them
Just drill through the stucco and then the wall behind it... if you have concrete under the stucco, use a hammer drill with a masonry bit
Is there a "stand alone power transformer"?
What power supply I will need for 4 10 inch led house numbers ?
How can this be installed above a garage on a concrete wall?
I would like to know the same. Also, do we need an electrician to install the numbers?
@@lianesps No, but If you need to ask, it's in your best interest to hire a handyperson who could do both projects. ; )
@@BTBEV3469what a dumb response
On a piece of 1×6 wood , the wires need to be tucked behind wood conspicuously.
How long do the LED lights last and then later how can they be changed?
Do you include the power supply? There is no mention of this on your website or video? It would be upsetting to order the numbers and not have all the required items.
I found out that the power supply has to be purchased separately.
Whats the size of the numbers you are installing?
The numbers in the video are 6" tall.
do you make with photocell?
No, we don't offer a photocell.
Very very interested
Whaaaaaa 😮💨 huh
humor. just casually glaze over the fact that you have to rip a large hole in your interior wall, deal with insulation, fish wire from a current circuit to the number location...
Not to mention, just silicone the numbers to the wall and pray shit holds?!? Jank
@@trailheadmedia5578 I have a hardware installation company and have installed mostly non lighted house numbers that mount the same as these for decades and have yet to have any problems, but I felt the same at first. I often have to install them on EIFS which seemed sketchy as it's mostly Styrofoam but they are all still there. Works good
Your website SUCKS! NO led backlit prices WHY??? $$$$$$$ Call us WHY$$$$$