Last one is deadly. Rpm on angle grinder is 11000 and normal cutting disks are rated for 12500. Your contraption can desintegrate and all thouse screws would become bullets. This might happen any time no warnings. Look up angle grinder accidents. Very dangerous. But is a good idea. For example with an anglegrinder with variable rpm at low settings might be safe enough. Cool idea. But not safe.
The saw blade sharpener will work if there is no set to the teeth. If there is a set you need to skip every second tooth and then reset the grinder to align with the other set.
Есть пилы с прямым зубом с твердосплавными напайками. Теоретически их можно так точить, только надо поставить на болгарку алмазный диск по металлу, но не по камню (оригинальный по металлу дорогой) или приспособить алмазную чашку. Болгарку надо с регулировкой оборотов. Тысяч 5 оборотов не более. В самом станке, как я понял, диск в момент заточки фиксируется только прижимом к кнопке выключателя- это слабое место конструкции.
Ladies and gentlemen boys and girls do not do this at home or anywhere else. Angle grinders run much too fast fothese crazy bodged up tools. You don't need them ,they are extremely dangerous are the there are many inexpensive tools that are designed for the purpose. They will do the job much better and a lot safer. Count your fingers and eye balls in the morning and before bed time....the number should be the same
2 вариант фуфло, на самом деле заточка не происходит, а наоборот кончик зуба ударяется о диск и тупится, после чего диск маленько загибается и входит в плоскость. Зуб диска должен сначало зайти, а потом подводиться к заточному диску
Yo personalmente,no recomendaría nada de esos inventos con la amoladora,porque la velocidad que tienen es muy grande por lo que las hacen sumamente peligrosas, hay que usar las herramientas como corresponde y para lo que fueron diseñadas
I like in the first one when they pull out the square to prove that the piece of hollow metal tube they cut on a 45° angle is perfectly square. No shit it's a perfect 90, it always will be when you take the two pieces resulting from a single angled cut and rejoin the cut faces after flipping one around.
This isn't true at all. It's the result of adding up both of the angles. If you cut it at 80 degrees you have two 80 degree cuts, so 160 degrees total.
@@TylerDurden1400 Actually is the duplication of the cut angle, since the angles you refer to have to be equal every time. You will get 90 degrees only for a perfect 45 degrees cut. Congrats for spotting the mistake.
Excellent tutorial! It's important to know this, and I appreciate you sharing your knowledge and experiences. Warm regards and, of course, a well-deserved like
Strange that you can still buy slotted screws........ A proper chippy still uses slotted screws if requested. They come out of painted hinges easier than rounded out cross heads. Seem like you have little experience good sir.
That's the first thing I thought of when I saw that. Seriously. Not sure if you watched this all the way to the end. hopefully not it gets a lot worse. Fucking dumb the shit going on in this video. I'm the idiot who watched it I guess.
The lathe is too dangerous because of the high RPM of the angle grinder. But I think if we use drill instead of angle grinder or a variable speed angle grinder than it'll be much safer. But we will also need to add a support to the other end like a real wood lathe.
The second invention is the switch? good video, good work, good inventions, greetings. En el segundo invento para que es el interruptor? buen vídeo buenos trabajos, buenos inventos, saludos.
It's actually a horrible idea, it will only work once with realignment, you can easily sharpen 30 just using a vise and grinder or just use a bench grinder and hold the blade by the time you made this and sharpened one
Hab nur den Teil mit der flex. Säge gesehen, ich habe da noch einen Tip! Junge kauf dir lieber eine richtige Kappsäge bevor deine Hände Geschichte werden. Das sieht sehr wackelig aus. Sowas ins Internet zu setzen sollte schwer bestraft werden.
Most remarkable thing is that he still has all his fingers! 😮
My tought aswell 😅
A good video of what not to do with your tools !!
Last one is deadly. Rpm on angle grinder is 11000 and normal cutting disks are rated for 12500.
Your contraption can desintegrate and all thouse screws would become bullets. This might happen any time no warnings.
Look up angle grinder accidents. Very dangerous.
But is a good idea. For example with an anglegrinder with variable rpm at low settings might be safe enough.
Cool idea. But not safe.
Agree 100%
A ahe rez agreee
Future Darwin Award Winner right there!
Three ways how NOT to use an angle grinder. Buying the correct tool is going to be more effective then losing your fingers.
The saw blade sharpener will work if there is no set to the teeth. If there is a set you need to skip every second tooth and then reset the grinder to align with the other set.
An artist teacher who deserves thanks
№2. так пилу нельзя заточить. (можно , но это неправильно. там углы заточки разные . через один зуб) , а у вас происходит спил зубов в 1 плоскость.
хрен с ним, с зубом, но заточным диском твердосплавные напайки, это реально жесть..
@@dioniseywings747 блин..таки да..куда я смотрел..
@@sergnemo2379 норм! Мне как то приспичило, я на алмазном плиткорезе такой диск затачивал........
Есть пилы с прямым зубом с твердосплавными напайками. Теоретически их можно так точить, только надо поставить на болгарку алмазный диск по металлу, но не по камню (оригинальный по металлу дорогой) или приспособить алмазную чашку. Болгарку надо с регулировкой оборотов. Тысяч 5 оборотов не более. В самом станке, как я понял, диск в момент заточки фиксируется только прижимом к кнопке выключателя- это слабое место конструкции.
This should be renamed to “How to unalive yourself with an angle grinder”
Руководство по заворачиванию саморезов. Автор понятия ни о чем другом не имеет, но снято всё красиво. Настоящий "мастер"!
Valeu muito obrigado!
Brasil 🇧🇷
Ladies and gentlemen boys and girls do not do this at home or anywhere else.
Angle grinders run much too fast fothese crazy bodged up tools. You don't need them ,they are extremely dangerous are the there are many inexpensive tools that are designed for the purpose. They will do the job much better and a lot safer.
Count your fingers and eye balls in the morning and before bed time....the number should be the same
2 вариант фуфло, на самом деле заточка не происходит, а наоборот кончик зуба ударяется о диск и тупится, после чего диск маленько загибается и входит в плоскость. Зуб диска должен сначало зайти, а потом подводиться к заточному диску
Там вообще ничего работать не будет, жёсткости нет никакой
Чушпан пацанов на просмотры разводит! Все эти приблуды для лохов!!! А ему денюжка за просмотры!!!
Sharpens blade with opposing angles to all one angle...
Thanks for showing you can still use slotted screws. Some people can't even hit the slot.
Yo personalmente,no recomendaría nada de esos inventos con la amoladora,porque la velocidad que tienen es muy grande por lo que las hacen sumamente peligrosas, hay que usar las herramientas como corresponde y para lo que fueron diseñadas
Oh snap 😮
Can’t believe he is still alive!!!
Yea, that's what happens when you have no idea how wood saws work 🤔
I like in the first one when they pull out the square to prove that the piece of hollow metal tube they cut on a 45° angle is perfectly square. No shit it's a perfect 90, it always will be when you take the two pieces resulting from a single angled cut and rejoin the cut faces after flipping one around.
This isn't true at all. It's the result of adding up both of the angles. If you cut it at 80 degrees you have two 80 degree cuts, so 160 degrees total.
@@TylerDurden1400 Actually is the duplication of the cut angle, since the angles you refer to have to be equal every time. You will get 90 degrees only for a perfect 45 degrees cut. Congrats for spotting the mistake.
This is a great video, people will learn a lot from it.
Like what the inside of a hospital looks like...
Все просто и понятно, без выпендрежа.
Excellent tutorial! It's important to know this, and I appreciate you sharing your knowledge and experiences. Warm regards and, of course, a well-deserved like
😊
Think 3x when you creating such things... safety first
Why would i take advice from someone who uses slotted wood screws...?
Only matching screws left from that 1940s miscellaneous jar
Because if someone can use slotted screws as fast as you can use cross-head screws, they're obviously more skilled than you are.
Strange that you can still buy slotted screws........ A proper chippy still uses slotted screws if requested. They come out of painted hinges easier than rounded out cross heads. Seem like you have little experience good sir.
@@steveogburn6316the video is sped up
That's the first thing I thought of when I saw that. Seriously. Not sure if you watched this all the way to the end. hopefully not it gets a lot worse. Fucking dumb the shit going on in this video. I'm the idiot who watched it I guess.
Last one is really funny 🤣 🐟 🤣 too🎉🎉🎉
Very nice
great for rounding the tips of the carbide teeth!
Congratulations!. Thank you
You are very creative.
I thought the lathe had a lot of play on the shaft.
Can you invent a homemade lathe to machine metal?
You have done a great job
Awesome! 👍👍👍
Как убить хороший инструмент и сдетать шикарное глюкало😊😊😊😊😊
Ini sangat luar biasa pemikiran yang sangat menakjubkan
Parabéns este amolador de serra ficou top de mais
So o amolador os outros são gambiarras.
Cutting machine , very good
Nice creator!😊😊😊
№3 самый необходимый! Ну без него прям никак...
2nd Idea (Thumbnail's ones) 😮😮
ЭЙ БРАТАН ТЫ КРАСАВА😊😊😊 ДАЙ БОГ ТИБЕ ЗДАРОВЙЕ УЗ Б🎉🎉
i like lathe project excellent, but instead of sharpening wheel we can but another one
За травмы от "этого"вам не заплатят по страховке 😮😢😂😂😂
The lathe is too dangerous because of the high RPM of the angle grinder. But I think if we use drill instead of angle grinder or a variable speed angle grinder than it'll be much safer. But we will also need to add a support to the other end like a real wood lathe.
Just buy a compound miter saw.
You do know those saw teeth are set at different angles?
Wrong grinding can cause you to cut in ways you don't want.
Absolute madness.
Really great
Very nice work ❤❤❤❤❤❤❤❤❤❤good 😊
3:51 I hope he has a fire extinguisher
Very good nice😊❤
Liarbiasa 👍👍👍
The RPM off the angle grinder exceed the max RPM of the saw blade by a factor 2. Not that smart to use a saw blade on a angle grinder.
muito bom mesmo
2nd one too good.
very clever.
TOP demais. Muito bom gostei muito, parabéns pelo seu trabalho ❤❤💯💯👏👏👏👏👏
Так точить победитовый диск нельзя!!! Зуб скалывается,надо СРАЗУ ВСЕЙ ПЛОСКОСТЬЮ касаться -то есть прислонять его,а не проводить зубом
marvelous
What is the name of that particular hinge ?
I can only suppose it is a /2 Cranked Hinge ?
Станок#2❤понравился ❤
정밀작업은 어려워요. 레일의 유격이 엄청납니다.
Actually more like a miniature radial arm saw
The blade sharpener was awesome... truly brilliant. You are a genius!!!!!
Я думал он ювелир по шнягам😂 а он оказывается игрушку делал
Good luck.
Заточил все зубья под одним углом.... \ /.
Os dentes da serra circular não podem ser amolados so em um sentido, eles têm ângulos diferentes. Não é muito útil essa coisa aí.
Метрическа система измерения сущестует!
Smart.
точильный станок вещь закрепляй болгарку на мертвой точке барашками а не шурупами.
Perdi alguns minutos da minha vida, dicas de como não usar uma esmerilhadeira.
2nd one is dangerous, no safety.
3rd one is wiggling..not properly fixed.
Woodworking hacks from someone using super glue on wood 🤔
Time bomb waiting to explode, speed much to high! Use slower speed motor on wood lathe PLEASE!
Hoje preferem o celular, este pinhão traz lembran😢!😂😂😂
This must be made as a joke..right?..it should be taken as a joke as they are idlotic and unsafe
No me parece, demaciado ineficiente el prollecto, muy improvisado para mi, y tiene mucha inestabilidad ese torno, deberías perfecionarlo un poco más?
The second invention is the switch? good video, good work, good inventions, greetings.
En el segundo invento para que es el interruptor? buen vídeo buenos trabajos, buenos inventos, saludos.
It's actually a horrible idea, it will only work once with realignment, you can easily sharpen 30 just using a vise and grinder or just use a bench grinder and hold the blade by the time you made this and sharpened one
What I'm asking is, what is that white switch for?@@jamarjames9501
Откуда у него еще все пальцы? Игры с болгарками до добра не доводят
Not a tape measure in sight!
Hab nur den Teil mit der flex. Säge gesehen, ich habe da noch einen Tip! Junge kauf dir lieber eine richtige Kappsäge bevor deine Hände Geschichte werden. Das sieht sehr wackelig aus. Sowas ins Internet zu setzen sollte schwer bestraft werden.
What the hell is sabotaging !?
crazy
Spin top cost a dollar 😂😂😂
не показывайте это видео Доктору Дью, иначе у него случится пердечный сриступ!
К чему городить такой забор!?От скуки?😢
Few cuts is all what it takes to clog the drawer slides, sorry for the time I wasted watching
last one is bery risky
❤❤❤
Like it
😀👍👍
ты уже определись или в сантиметрах указывай или в дюймах
Muito bom 👍
❤❤❤❤❤❤❤
Хочешь убить диск !!!!,???? Повтори!!!!
То как все собрано развалится через 30 мин,или руки нахер поотрывает,что бы этому самоделкину их и по отрывало!!!
Ain’t gonna work my man. All the teeth aren’t the same angle
круче херни я еще не видел)))
Люфт ,у мебельных направляющих,ещё тот!!!! Фигня на посном масле!!!!
Opan the childdudh memory.waw.
Ну первая самоделка ещё куда не шло,а 2я и 3я полный отстой,ни надёжности ни точности👎👎👎