How to Configure Alcatel Switch | Step by Step Configure Alcatel Switch

How to configure Alcatel switch.
#alcatel #switch #configure_alcatel_switch
In this video I will show you how to configure Alcatel switch from beginning and step by step.
Enjoy the video and have a great day!
Please Subscribe for More VDOs.

[@ayoubennassiri623]

but can you to create all ports : vlan 301 port default 1/1-28

[@besttime2315]

sure

[@Lavabo-Quebec]

too bad they did not the same with VLAN XXX 802.1q 1/XX -----> you have to listed one by one... put it in a texte and copy/paste

[@kwatta1979]

How do you configure unp?

[@Haouzitech]

Please. Help: I ​​want to access the alcatel switch, but I am having difficulty logging in via the console cable

[@besttime2315]

if you have IP and telnet or ssh turn on, you can access via network port

[@Haouzitech]

@@besttime2315 The switch will work for the first time. I connect it to the console cable and enter Putty, but it does not work

[@chris_1am]

how to add new user account?

[@besttime2315]

1 Create a user account on the switch and define its password. Enter the following CLI syntax to create
the account “community_user1”.
-> user community_user1 password ******* no auth read-only all
2 Map the user account to a community string.
A community string works like a password so it is defined by the user. It can be any text string up to 32
characters in length. If spaces are part of the text, the string must be enclosed in quotation marks (“ ”). The
following CLI command maps the username “community_user1” to the community string “comstring2”.
-> snmp community map comstring2 user community_user1 enable
3 Verify that the community string mapping mode is enabled.
By default, the community strings database is enabled. (If community string mapping is not enabled, the
community string configuration is not checked by the switch.) If the community string mapping mode is
disabled, use the following command to enable it.
-> snmp community map mode enable
->show snmp community map
Community mode : enabled
status community string user name
--------+--------------------------------+--------------------------------
enabled comstring2 community_user1

[@sgparthasarathy]

How to access switch through ethernet

[@yahlov]

WebView. Look up in Documentation