@@HeatherBoydWire I just ordered Artistic Wire 20-Gauge Tarnish Resistant Silver Coil Wire, 25-Feet and Beadalon Artistic, 20 Gauge, Tarnish Resistant Brass, 15 yd (13.7 m) Craft Wire, NT Silver. Do you think I can get away with making rings and face earrings from these two wires.
This was really an amazing tutorial! I just made two for a early birthday present and they loved them. This is a really simplified easy way to make them.🙂
You are an awesome teacher, thank you for sharing your wonderful talent! I have been trying for some time to make rings with letters, and couldn't find a tutorial that could explain and show with good close up and patience on how to make them until you, thanks again God bless you.
@@HeatherBoydWire Omgggg I just watched your rings to sell in 2021 video and I wanted to know where you get your tools. I checked your Amazon store but the exact ones you used in your videos is not there.
@@julie-r2w first of all, rock Lee’s my favourite second, I tried making letters like the video but oh man it was very difficult. They didn’t turn out as pretty as Heathers.
Hi Heather, I love your letter-ring tutorials…. When I try to do them, I am a failure, no matter how many times I try. Okay….. Okay Just because I haven’t done it yet, doesn’t mean I won’t try again- it just means that I have to work a little harder with the materials I have. Thank you again for your kindness and perseverance. Jurny
I'm surprised you went through the whole alphabet, but I'm also grateful. Thank you!!!🤗 Your video has helped me finish off a gift I've been working on for 8 months. Not lying well about either thing I said.
Thank you for making a wire work tutorial for the letter Q! Wirework words are so hard to do in general! I've done a few words like "Wish" and "let it Go"
I really don't comment on any video,but I had to on this one,because i watched the whole video and did three rings for me and my sisters by watching your tutorial and it actually took like 2-3 minutes for one ring Thank youuu
Muchas gracias soy de Perú...no hablo Inglés pero trato de entenderte ...si hubiera un traductor sería divino...te sigo hace unas semanas porque me encantó tu trabajo...a pesar que no te entiendo cuando hablas ....te dejas entender bien con las manos. .muchas gracias esto buscaba hace tiempo el alfabeto.... BENDICIONES
I made four M's just to get it looking okay without a ton of scratches, I even managed to make the first loop end up side down , twice?! Thanks for the video :)
Wow! You just let me astonished, this is the most useful, clear and marvelous video I have ever seen. I have just surprised a good friend of mine with a gift, hehe. And I have tons of projects on my mind! Thank you so much, and may God bless you for the happiness you are creating :)
Oh my goodness! THOSE R SUPER CUTE and look so simple! Can't hardly wait to try! Looks like making different sizes would be easy as well! Thank u, thank u, thank u!
Thank u so much I’m going to surprise my My moms sisters and my cousin I haven’t seen them in three years and I am going to see them and I am going to give them these rings hope they love them
I have a pretty unique name and it starts with a Z, I wanted to make one of these rings but I thought the Z you made was a little yo simplistic for me, so I added a few things like some extra loops at the end and a line in the middle of the Z, so thanks for inspiring me, I love my new ring 😊😊
Hi Heather. I'm new to your channel 😊 may I say how excited I am to have come across your content 🥰 I've been trying so hard to do letter rings and full name necklaces, but I was never really content with how the letters came out, or the positioning of the letter with the back side of the wire, also I'm not entirely sure which wire size would be perfect for this kind of jewelry art 🤔 If you could please give me some pointer's, I'd deeply appreciate it. I'm practicing it so that I can open my own Etsy shop 🥰 p.s I'm watching you from Victorville California 🏜️
Thanks so much Veronica. I have a playlist of letter and word tutorials here: th-cam.com/video/IjoGg-MPEtQ/w-d-xo.html Also some templates in my Etsy DIY shop: www.etsy.com/ca/shop/HeatherBoydWireDIY?ref=seller-platform-mcnav&search_query=letter The size can vary depending on what you are making. Good luck! Heather
Hi Jennifer. 18 g is best for the rings. Here is a simple wooden dowel www.amazon.com/dp/B08X6NZZSD?ref=exp_heatherboydwire_dp_vv_d Here is the stepped wooden ring mandrel: www.amazon.com/dp/B07G4H5V42?ref=exp_heatherboydwire_dp_vv_d
Hi Lillian: Some people hammer rings with a soft mallet to stiffen the wire. I tried some designs with a double wire but they are more complicated. I'll try to do a video to show you soon. In the meantime I did a quick sketch and posted in the community section: th-cam.com/users/HeatherBoydWirecommunity
I bought the red pliers 30 years ago at a hardware store. I believe they were in the fishing department. They are no longer available but are many good brands on the market including Tronex and Zebra.
You will need a set of 3 pliers (cutters, round nose pliers and flat chain nose pliers) amzn.to/3tcJ2AE and 18 gauge wire (I like the tarnish resistant brass from Beadalon) amzn.to/3taXI31
Thanks Drithi. The wire might damage the scissors, but I have some tutorials making jewelry without tools that may help: th-cam.com/users/HeatherBoydWiresearch?query=no%20tools
I have a few videos showing how to make wire jewelry without tools th-cam.com/users/HeatherBoydWiresearch?query=no%20tools You can make your own rings cone here: th-cam.com/video/0TDiiAVqoVk/w-d-xo.html
@Heather Boyd Wire thank you so much for telling so fast 💜I want to make the ring for my sis for her birthday and the BTS keychain do you know bta so thankful lots of love from Pakistan 🇵🇰💜
I used Michaels craft wire in 18 g, but you can also use Artistic Copper tarnish resistant copper or brass wire from Beadalon or any 18 g wire. www.michaels.com/gold-wire-value-pack-by-bead-landing/10545083.html
It might be tricky to get the details without tools, but I do have a view vids without tools here: th-cam.com/users/HeatherBoydWiresearch?query=no%20tools
I use Michaels brand craft wire 18 gauge: www.michaels.com/gold-wire-value-pack-by-bead-landing/10545083.html I also use Beadalon Artistic tarnish resistant copper for my TH-cam samples.
Not to be picky, but because I was doing the letter T and S Kept having to go back-and-forth looking for the spot. If there is any way that you can put the letter of each ring in the background that would make You're video more user friendly. 😉 Sorry for the cliche line it's basically our mantra at work😁
You know what I'm sure that if I looked at your video on something bigger than this these timestamps I often notice that when looking at the computer compared to my phone that there's more I apologize do you want me to delete that
Timestamps for Ring Tutorial:
A 0:22
B 2:12
C 3:50
D 5:00
E 6:28
F 8:17
G 10:05
H 11:25
I 12:52
J 13:47
K 15:32
L 17:21
M 18:34
N 20:25
O 22:06
P 23:56
Q 25:31
R 27:40
S 29:32
T 30:53
U 32:07
V 33:21
W 34:28
X 35:59
Y 37:53
Z 39:12
Thank you so much for giving the times :)
CONGRATULATIONS it's GREAT Thanks FOR sharing.... 🥰😍💖🍀
V v gg okkk
Thanks❤
Thanks dude
I do not know how I didn’t get bored I watched the whole video without skipping
I'll take that as a big compliment. THANK YOU Joscelyn.
Way too cute.
Thank you again for sharing your work and talent with us
Enjoy your day ♥️♥️♥️🌈🦋
Thanks Lynda and you are very welcome.
I'm loving these, they would make perfect gift rings especially in stirling or gold filled🤩
That would be lovely Amber. Thank you.
Magic Hands. So beautiful rings! Thank you so much!
Thanks so much Elsa.
This gave me soooooo many ideas of small words to put on my fingers like “j o y” or “l u c k” or “l o v e”
I love your videos!
I love that idea Kathy!
Cant wait for this onee. It’ll be the first ever piece I make. Excited!!
That's so awesome. I tried to make the rings as simplified as possible! I used 18 gauge wire but you can get away with 20 gauge.
@@HeatherBoydWire I just ordered
Artistic Wire 20-Gauge Tarnish Resistant Silver Coil Wire, 25-Feet
and
Beadalon Artistic, 20 Gauge, Tarnish Resistant Brass, 15 yd (13.7 m) Craft Wire, NT Silver.
Do you think I can get away with making rings and face earrings from these two wires.
@@HeatherBoydWire I’m super excited to try it out!!
@@raniamajid4594 The brass will be stronger and should work. They will just be a bit more delicate than 18 g but still good!
@@raniamajid4594 Awesome!
This was really an amazing tutorial! I just made two for a early birthday present and they loved them. This is a really simplified easy way to make them.🙂
I'm so happy Emma. Thanks for the great feedback.
I would likevto say thank you very much for sharing this awesome information. Helped me a lot.
You are very welcome Rose. thanks for watching.
You are an awesome teacher, thank you for sharing your wonderful talent! I have been trying for some time to make rings with letters, and couldn't find a tutorial that could explain and show with good close up and patience on how to make them until you, thanks again God bless you.
Thanks so much for your kind words. I'm so happy this video is helpful. Good luck and all the best, Heather.
You make this look so easy but I feel like when I try I’m gonna have such a hard time.
Just takes practice. Some letters are easier than others!
today i started making rings and it's not actually as hard as you think, so good luck if u do make some! :)
@@HeatherBoydWire Omgggg I just watched your rings to sell in 2021 video and I wanted to know where you get your tools. I checked your Amazon store but the exact ones you used in your videos is not there.
@@julie-r2w first of all, rock Lee’s my favourite second, I tried making letters like the video but oh man it was very difficult. They didn’t turn out as pretty as Heathers.
Mere too..I just tried three times and still missing something lol
Hi Heather, I love your letter-ring tutorials….
When I try to do them, I am a failure, no matter how many times I try. Okay…..
Okay
Just because I haven’t done it yet, doesn’t mean I won’t try again- it just means that I have to work a little harder with the materials I have.
Thank you again for your kindness and perseverance.
Jurny
Thank you.
Simply satisfying watching this tutorial, thank you for making it understandable ❤ can't wait to try 😊
Thanks so much Lisa.
Thank you so much 💓 Heather, as always your talent and willingness to share it, is a True Gift. You are a blessing. 🙏
It is my absolute pleasure Leslie. Thanks for watching!
I made the letter L. It is the first letter of my name. It was very clearly explained. It is beautiful.
I'm so happy the tutorial helped Lore.
I'm surprised you went through the whole alphabet, but I'm also grateful. Thank you!!!🤗 Your video has helped me finish off a gift I've been working on for 8 months.
Not lying well about either thing I said.
That's awesome Matthew. Thanks so much for letting me know.
Thank you for the detailed tutorial 😍🤍
You are very welcome Joerina.
Thank you for making a wire work tutorial for the letter Q!
Wirework words are so hard to do in general!
I've done a few words like "Wish" and "let it Go"
Here you go: th-cam.com/channels/YVZzUvVXBsc1uRRUBGX6sg.htmlcommunity?lb=UgkxTVU752Vv0Np2BvfyZJ9a4sy_DC_R6Kc_
Gee this artificial is so incredible😍
I tried this and it turned out so cute and it was so easy to make! Changing the size was a piece of cake as well! 🥳😁😂
Awesome. I'm so happy Emily.
I really don't comment on any video,but I had to on this one,because i watched the whole video and did three rings for me and my sisters by watching your tutorial and it actually took like 2-3 minutes for one ring
Thank youuu
YAY, I'm so happy. Thanks so much for letting me know!
Your so talented and a joy to watch
Thank you so much Kelly.
Muchas gracias soy de Perú...no hablo Inglés pero trato de entenderte ...si hubiera un traductor sería divino...te sigo hace unas semanas porque me encantó tu trabajo...a pesar que no te entiendo cuando hablas ....te dejas entender bien con las manos. .muchas gracias esto buscaba hace tiempo el alfabeto.... BENDICIONES
Gracias por ver. Lo siento, no hablo español, pero espero que puedan seguir mis videos. Heather
Me encantan!! Gracias por sus enseñanzas. Lindo su trabajo 😊
Gracias.
Yes plis
I made four M's just to get it looking okay without a ton of scratches, I even managed to make the first loop end up side down , twice?!
Thanks for the video :)
I'm happy it's working for you. Thanks for letting me know.
Hi Heather you really do a Beautiful job keep up the good work ok 👍 👌
Thanks so much Lorilee
Wow! You just let me astonished, this is the most useful, clear and marvelous video I have ever seen. I have just surprised a good friend of mine with a gift, hehe. And I have tons of projects on my mind! Thank you so much, and may God bless you for the happiness you are creating :)
Wow, thank you so much for your beautiful feedback. I am so happy the tutorials are helpful. All the best, Heather.
Oh my goodness! THOSE R SUPER CUTE and look so simple! Can't hardly wait to try! Looks like making different sizes would be easy as well! Thank u, thank u, thank u!
My pleasure Gayle. Have fun with them!
You make these look so easy to do.
Thanks Debbie. It took a while to perfect all the letters and I love them as rings!
You're amazing, i love your work, this is very hard for me but, this videk is my mine of gold.
Thanks so much for your kind words!
Mam this methods is very good and easy . Thank you
You are very welcome.
It’s so nice for you to mak this video I rlly appreciate it
I'm so happy you liked it!
U are so talented😋
Thanks so much .
impresionante como maneja el alambre, yo no he podido hacer una argolla jaja, mis respetos, excelente
Gracias!
Wow, you are very good at this I love your work
Thanks so much.
Thankyou so much ❤️❤️
I really appreciate it ❤️😊
Thanks for watching!
I have to try this...
Absolutely Beautiful 😍
Have fun with the initial rings Brandy.
@@HeatherBoydWire I tried it with 20 Gauge cheap Wire and it's looks terrible...😃🤪🤣😂😅
I don't have 18 or 16 Gauge Wire 😭
Thank you! These are beautiful!
You are very welcome.
this is amazing and easy whooo😘
Thanks so much Chris!
Thanks i tried it it's really beautiful
Waiting for this beautiful tutorial!
See you on the premiere Sanjana. Thank you!
Wow you're so amazing ❤❤❤I wanna be like you when I grow up 😁😁😁
Aw, thank you Simone.
Thank u so much I’m going to surprise my My moms sisters and my cousin I haven’t seen them in three years and I am going to see them and I am going to give them these rings hope they love them
That's awesome. Thanks for letting me know.
Ur welcome 😊
I can’t believe someone liked my comment 😱
I’m new but I’m sure I will be watching ur videos
Incredible ✨ awesome. Thank u sooo much ❤️🙏🏾👏🏾👏🏾👏🏾👏🏾💯
Thanks so much Winnie.
Wow its so beautiful!!!
Thank you Shelly.
I have a pretty unique name and it starts with a Z, I wanted to make one of these rings but I thought the Z you made was a little yo simplistic for me, so I added a few things like some extra loops at the end and a line in the middle of the Z, so thanks for inspiring me, I love my new ring 😊😊
Awesome. I'd love to see a pic if you can message me on Facebook @heatherboydwire or email info@heatherboydwire.com THANK YOU.
Very nice 👍🏻
Thank you.
Very nice
Thank you.
Hi Heather. I'm new to your channel 😊 may I say how excited I am to have come across your content 🥰 I've been trying so hard to do letter rings and full name necklaces, but I was never really content with how the letters came out, or the positioning of the letter with the back side of the wire, also I'm not entirely sure which wire size would be perfect for this kind of jewelry art 🤔 If you could please give me some pointer's, I'd deeply appreciate it. I'm practicing it so that I can open my own Etsy shop 🥰 p.s I'm watching you from Victorville California 🏜️
Thanks so much Veronica. I have a playlist of letter and word tutorials here: th-cam.com/video/IjoGg-MPEtQ/w-d-xo.html
Also some templates in my Etsy DIY shop: www.etsy.com/ca/shop/HeatherBoydWireDIY?ref=seller-platform-mcnav&search_query=letter The size can vary depending on what you are making. Good luck! Heather
@@HeatherBoydWire Thank you so much 😊 and Thanks again for inspiring me 🙏💕
Looks good! 😊😊👍🏼👍🏼
Thanks so much Mirja!
GREAT, WONDERFUL Thanks FOR sharing, CONGRATULATIONS, WONDERFUL 🥰🌹💖💋🍀
Thanks so much Jimena.
Nossa vc faz muito rápido..parabéns
Obrigada Tatiana.
Like this beautiful tutorial ma'am❤
Thanks so much Neha.
@@HeatherBoydWire you're welcome ma'am
This is so pretty, definitely will do
Have fun with the rings Gaby.
Nice! Can I use a metal paper clip as the wire? Waiting for your quick response
You can use a paperclip, but it may not be long enough to make the band. You can try a large size clip.
@@HeatherBoydWire Thank you! And b/w can you do a vid on how to make the name "Ramsha" with a wire? Please I would be really pleased and grateful!!!
So cool ❤️❤️❤️
Thank you Carolina!
Is very nice❤
Thank you.
Your really great
Thanks so much.
Amei essa ideia vou tentar fazer ..beijo do Brasil
Boa sorte e divirta-se com o design.
Thanks for the tutorial! What type and gauge did you use for the rings?
Thanks Asma. 18 gauge is best for the rings. You can get away with 20 g but the band will be thinner.
@@HeatherBoydWire thank you! Love your tutorials, I just made the moon ring!
Gorgeous
Thank you Maria!
Thank you so much 🤍
You are very welcome!
Aww.. So pretty.. and why it always look so easy, but its hard if you it by yourself.. Haha
Thank you. It's easier for me after 30 years of practice!
@@HeatherBoydWire waa so long time, i know, bcs we need to keep learning and practicing everyday
Hello! If I may ask where did you get your ring size gauge ?
Here is a ring size chart Joselyn: drive.google.com/file/d/13-1YKC7-fqR8ohKNDotp1mO7fPB2B51q/view?usp=sharing
What gauge wire did you use? Where did you get the dowels? What are there product names?
Hi Jennifer. 18 g is best for the rings. Here is a simple wooden dowel www.amazon.com/dp/B08X6NZZSD?ref=exp_heatherboydwire_dp_vv_d Here is the stepped wooden ring mandrel: www.amazon.com/dp/B07G4H5V42?ref=exp_heatherboydwire_dp_vv_d
I have a quick question, what wire do u use here like specifically please
Hi Brenda: I used the 18 gauge Artistic copper wire for the rings.
@@HeatherBoydWire thank you so much for letting me know ❤️
Eu amei o j 13:50💕
Is there any way to make it like stronger thinking of doing it like on a double around why are going around twice to make it stronger what you think
Hi Lillian: Some people hammer rings with a soft mallet to stiffen the wire. I tried some designs with a double wire but they are more complicated. I'll try to do a video to show you soon. In the meantime I did a quick sketch and posted in the community section: th-cam.com/users/HeatherBoydWirecommunity
Hi heather, where did you buy your small round pliers? The red one? Thanks
I bought the red pliers 30 years ago at a hardware store. I believe they were in the fishing department. They are no longer available but are many good brands on the market including Tronex and Zebra.
hi! is there a kit i can buy on amazon with all of the stuff i need to do this?
You will need a set of 3 pliers (cutters, round nose pliers and flat chain nose pliers) amzn.to/3tcJ2AE and 18 gauge wire (I like the tarnish resistant brass from Beadalon) amzn.to/3taXI31
@@HeatherBoydWire thank u so so much.
Can we cut the wire with scissors
And can we do folding and all with bare hands
By the way amazing, you are amazing!!!
Thanks Drithi. The wire might damage the scissors, but I have some tutorials making jewelry without tools that may help: th-cam.com/users/HeatherBoydWiresearch?query=no%20tools
@@HeatherBoydWire ok thanku I am going to try these.....💕
@@drishe08 Good luck!
@@HeatherBoydWire ☺️
Hola, lindo trabajo. Que alambre es ese y que número ?
Wire is 18 gauge Artistic tarnish resistant copper in gold colour.
❤❤❤
What do we use if we don't have pliyers and ring cone
I have a few videos showing how to make wire jewelry without tools th-cam.com/users/HeatherBoydWiresearch?query=no%20tools You can make your own rings cone here: th-cam.com/video/0TDiiAVqoVk/w-d-xo.html
@Heather Boyd Wire thank you so much for telling so fast 💜I want to make the ring for my sis for her birthday and the BTS keychain do you know bta so thankful lots of love from Pakistan 🇵🇰💜
I do you make these with half hard, hard or soft wire?
I used Artistic Copper wire which is more on the soft side, but not dead soft.
@@HeatherBoydWire can I email you? Or DM you somewhere? I have a question. Or maybe I can post it here?
@@MsFlexii88 you can email info@heatherboydwire.com or ask here!
Hi! I have a question. Artistic Wire 20 gauge is good for making rings?
Yes 20 g is good, but more delicate. The 18 g is perfect for these rings or a half hard 20g
@@HeatherBoydWire Thank you very much!
@@florentina8620 You are very welcome!
How many inches did you cut the wire
You can use about 6 -8 inches for each ring depending on the design, size and how big the letters are.
Thank u
what kind of plier you use here?
These are the pliers I use currently: th-cam.com/video/VIAZuW-G9Ls/w-d-xo.html
I make most all types of wire rings myself but I just trying 2 make a butterfly and I messed up it was hard 4 me to do it .
I do have a butterfly ring tutorial here: th-cam.com/video/n6ic6_ihjtE/w-d-xo.html
Just wondering, what wire did you use for this video? Can you give me a link please ? ❤️
I used Michaels craft wire in 18 g, but you can also use Artistic Copper tarnish resistant copper or brass wire from Beadalon or any 18 g wire. www.michaels.com/gold-wire-value-pack-by-bead-landing/10545083.html
My J looks easy. May give it a try. :)
Design for the J was thanks to viewers' feedback in this video at 18:00 th-cam.com/video/eecKQqVBlyQ/w-d-xo.html
Wow!
Thank you!
Is this half hard wire or hard wire? Thanks
Half hard is best for the letters.
@@HeatherBoydWire thank you! Would you say steel is sturdier than other wire materials? Ty
Can you please give the link of the material
Hi Diyanka: I used 18 g Artistic wire bit.ly/2qz3bSS
well mine ring size is 9 and mine name starts with an letter H how you make a ring out of that?
Hi Helen: Here is the timestamp for the letter H 11:25
What price would you put for these
It depends on the wire. Could be between $10 or $20
How to pack this ring for courier?
I would put it in a box.
I wonder if you could make this without any tools
It might be tricky to get the details without tools, but I do have a view vids without tools here: th-cam.com/users/HeatherBoydWiresearch?query=no%20tools
Hey can i know which wire u use i mean can share the picture
I use Michaels brand craft wire 18 gauge: www.michaels.com/gold-wire-value-pack-by-bead-landing/10545083.html I also use Beadalon Artistic tarnish resistant copper for my TH-cam samples.
What kind of wire you use
I prefer the Beadalon Artistic wire in tarnish resistant copper or brass. You can use 18 gauge for these rings.
Los vende
How it cost?
I don't sell these rings.
Not to be picky, but because I was doing the letter T and S Kept having to go back-and-forth looking for the spot. If there is any way that you can put the letter of each ring in the background that would make You're video more user friendly. 😉 Sorry for the cliche line it's basically our mantra at work😁
Hi Matthew: There are timestamps for all the letters in the description of the video!
@@HeatherBoydWire ok missed that ill check thank you for responding
You know what I'm sure that if I looked at your video on something bigger than this these timestamps I often notice that when looking at the computer compared to my phone that there's more I apologize do you want me to delete that
What wire do you use
Hi Alexia: I use Michaels craft wire for many of my samples also Beadalson Artistic copper and brass wire.
@@HeatherBoydWire can i use aluminum anodized for making a ring?
how do you do it so perfect? 🤬
30 years of experience!
🌷🌷🌷🌷🌷
initial ring ⸜(* ॑꒳ ॑* )⸝ nice！👍 Thankyou 😊
Wire kha milega
You can buy wire on Amazon. I like the Beadalon tarnish resistant copper.
@@HeatherBoydWire tq
M