Excellent. I was entertaining the same idea to more effectively discharge small rocks that will grind away in the gap between the impeller and housing. Discharging wet snow would be a bonus.
Heck ya! Just did this mod to my new St224! Throws snow at least ten feet farther down the lane! Can’t wait to see how she goes in slushy stuff! Pretty sure I know what’s gonna happen!
This mod will help any two stage snowblower achieve betterer performance for sure. Did it to my old 5.5 hp Yard Man and made a huge difference! Like he said take different size bites and see where she performs best then your good to go! My mod has been five years running with self tapping sheet metal screws and tire sidewalls. Holding up fine!
Got it from a Nieghbor that moved away in trade for some work on his truck and 300 bucks. Hadn’t really looked at the thing closely but new it threw snow further than mine! Lol! live and learn! It is like new. One thing I’d like to fix is the low idle. Whenever it’s warm and I turn the engine speed down it won’t go all the way to idle. I feel like the dial might break . Is there a way to fix this issue. More folks have to be having this issue??? Thanks
Customer is still using it and very happy with it. Remeber to just use the low gears don't go to higher gears so you don't run the risk of snapping the plastic console
I have some 3/16 thick rubber conveyor belting, do you think it would work for this modification? Also have you had any issue with the sheet metal screws stripping out over time? Suppose you could always bolt on later if they did.
I had someone use 1/2” thick rubber and said it works great but won’t know how well until snow falls. I have had ZERO issues with sheet metal screws. My ariens are 5-6 years with impeller mod and still holding up well with commercial use 🔧🦅🤙🏻🇺🇸 This year due to WUFLU I can’t get the Mudflaps (MF) I have been using for years. I had to switch to a different supplier. The flap is thicker and I like it! Issue with the new and thicker MF, is on some machines the impeller is made of plastic and on those I have to NUT and Bolt it Thanks for the view and comment, hopefully you subscribed to my channel and keep me updated on your project 🔧🤙🏻🇺🇸🦅
This will solve the slushy problem and extend belt life. Your belt is slipping off bc it is stretched/worn. Try and adjust the tensioner or just replace the belt. Thanks for the view and comment, hopefully you subscribed to my channel 🔧🤙🏻🇺🇸🦅
Do you have (or know of) a video on removing the impeller for the Husqvarna 224/227? As I was looking at the impeller to make this mod I realized the fins were barely hanging on. But I can’t seem to break the nut on the impeller pulley wheel. I’ve been turning counter clockwise but am starting to round the nut. It’s not supposed to go clockwise is it? Thanks
Question: I have been getting objects wedge between my impeller and bucket and it damages the bearing on this husqvarna. Now the bearing doesn't seat tight into the housing. Not sure the housing is worn. If the bearing doesn't sit tight in housing the auger shaft will have play. I fould thing as I tighten the pulley it would pull the auger shaft tight so the bearing doesn't slip out. Have you seen this issue?
That’s great! I don’t like play at all. There has to be some tolerance but I wish it was a little tighter! Thanks for the view and comment, hopefully you subscribed to my channel 🤙🏻🦅🇺🇸🔧
Looking for advise on how to replace the impeller on my Husqvarna st224 snowblower. I sucked in a big rock from my gravel driveway and it’s bent beyond repair
I’m really sorry to hear that! Surprised the sheer pins on the impeller didn’t break to protect the impeller. Pick up basic tool set with metric and standard sockets and wrenches, hammer and a few punches. If you have a jack stand…use it support the console part/frame where the motor is mounted. Get Jack stand into place Split machine is half (make sure all your cables and chute is disconnected first). You will have the auger housing by itself now. Remove the big auger pulley…so it should be the bearing and shaft. Remove the bolts on the side of each auger housing. See if the whole ASM slides in and out. If it does pull it out…remove sheer pins…slide impeller off. Get wire wheel or brush and clean the shaft. COVER IT IN ANTISEIZE…install new impeller and reverse the process to install. Both my wife and I have Covid…if you get a point where you need help send us a message on Instagram and we can do a live video chat to walk you through where you are stuck Thanks for the view and comment, hopefully you subscribed to my channel 🤙🏻🦅🔧🇺🇸
George Drake Yes, BUT you will greatly reduce the risk if you follow my regiment. Part of my maintenance on the machine is cover in oil before being put away, before snow hits and just before I use it. Reward outweighs the risk in this case. This machine is made by AYP. Machine will fall apart before the impeller does. Thanks for the view and comment. Hopefully you subscribed to my channel.
@@richardcabitto5108 it beats shoveling...what issues are you having? Let’s work through it... Thanks for the view and comment, hopefully you subscribed to my channel 🔧🤙🏻🇺🇸🦅
No real issues except I did not realize this model does not provide the levers to unlock hubs to make turning it around much easier than ganking it about! Really messed up my back on the first snow here a month ago ! I was freaking out! Lol! Nothing I can do about though. Had an old yard man with 5.5 horse Tecumseh with the pin on the axle you could switch spots with for positive traction or open differential action! It was given to me and I loved it ! Especially after I did the impeller mod! Used it for years and gave it away a couple months ago when I got this one! Dang it. I’m going to do the mod to this one but sure wished I had realized drive/steering issues before buying this one but agreed, it is better than shoveling! Cheers and merry Christmas! Thanks for helping all of us yolkheads out here!
@@richardcabitto5108 if your willing to learn, I’m willing to teach! Where did you buy your machine from? They didn’t have a display model? Glad our paths crossed..through my channel, you can score a snowblower with power steering and cheap and sell yours! Hopefully you end up with cash in your pocket when it’s all done! Love the impeller mod! 🇺🇸🤙🏻🦅🔧
Thank you! Husqvarna still makes these machines. You can buy brandy Spanky new or get one second hand! There is nothing special about this machine...very similar to Troy Bilts and Craftsman’s just a different color. Even a Cub Cadet! Thanks for the view and comment, hopefully you subscribed to my channel 🤙🏻🇺🇸🔧🦅
It’s going to rust! Believe me, just use the self tappers and DO NOT FORGET coat the machine with some sort of lube before you blow! Don’t think...just do it and THANK ME LATER! Thanks for the view and comment, hopefully you subscribed to my channel 🤙🏻🇺🇸🦅🦅
Thanks Man! NICE SNOW BLOWER :) Dip stick maybe a small yellow knob that is twisted dirtectly onto the block. Let me know if that helps or if it doesn't! here is a link to a tune-up HOW TO that including changing the oil thanks for the view and comment, hopefully you subscribed to my channel th-cam.com/video/lePPd1ZU1Gw/w-d-xo.html
Absolutely and is a game changer! I wouldn’t own a snow blower with out this mod! It is a night and day difference. If you go through my channel you will see the following makes with this mod in action... Ariens Toro Lawnboy Snow Tek Craftsman Poulan Thanks for the view and comment, hopefully you subscribed to my channel.
@@pattayperformance ok,i must check your other videos.I have got canadiana snowblower with Honda gx140 engine.Old and shit Tecumseh engine goes broken and I have old terrain virbra engine,Honda.I am using blower with Honda about 4 winter and its one pull start engine.Greetings from Santa Claus hometown, Finland!
Where we live we get heavy wet snow where your stock machine is useless and belches out snow if you don’t get it before the rain hits. Besides...ever heard of Tim Allen? Thanks for the view and comment, hopefully you subscribed to my channel 🔧🇺🇸🤙🏻🦅
@@pattayperformance i seen it done on older blower but most newer ones do not need it i got the same blower as you do its 3 years old just adjust the belt and cable yearly and it works great
I have a question to anyone who owns one of these or knows why my GEAR 80T DRIVEN sprocket keep separating and then my snow blower no longer drives! It is a bit of a pain in the ass to get into and place it back together for another 20minutes of throwing and then its off again so frustrating. Please if anyone knows reply to me and you will be forever loved lol!
That sprocket should be held in place by a pin,bolt,clip. Some of the are a keyway...have you checked your parts break down and compared to what’s actually on your machine? Thanks for the view and comment, hopefully you subscribed to my channel 🤙🏻🦅🔧🇺🇸
@@pattayperformance I most certainly have subscribed =) tyvm for replying so quick! I have reviewed the manual they gave me and its all there. Its a 2 pc sprocket and the top half is the one walking off not the bottom. I wish I could post pics here lol.
Please don't leave a gap. If you properly maintain your machine this will NEVER be an issue. Thanks for the view and comment, hopefully you subscribed to my channel!
I agree, there is no reason to leave so much overlap of the rubber material. Two mm gap is more than sufficient to get the job done without tearing off the inner paint on auger wall. Additionally, there are silicone sprays with teflon and other sprays that help prevent the snow from sticking to the auger and moving parts. Preventative maintenance means don't cause future issues that need further maintenance due to improper installation in the first place
@@kcstereo I will continue to disagree, you leave a gap you are defeating the purpose the purpose of the modification. Here we are year 6 with Commercial Used and Abused Ariens with the Impeller modification done right and zero issues. They are all still chuckers and no rust. Even with out the impeller modification you should be coating the inside of the machine with oil based spray...even Pam will do. You can try ceramic coating but to me the effort isn’t worth the results. You hit the nail right on the head! Preventative maintenance is key...since you own such a cheaply made machine it’s more important than ever to address scrapes and scratches before they turn to rust...rust turns to rot. Thanks for the view and comment, hopefully you subscribed to my channel 🦅🤙🏻🔧🇺🇸
This is how u brake belts faster u do not have it hanging over the edge ur suppose to have it just touching the wall of the impeller spot so it dont drag a ton but does the same job just better and it dont brake plastic in the cold and other stuff cut them the right way 0 hanging over the edge
Thanks for stopping by but you are in correct. Have plenty of machines out there to prove it. Belts Bearings Gear Boxes are good to go. I don’t use thick rubber…the type I use is just perfect where it’s spring which increases snow throw distance. If you go to thick YOU may run into issues. I’ve been using the same thickness for the past 8 years 🔧🦅🇺🇸🤙🏻
@@pattayperformance i only said it for ppl who go on amazon get a impeller kit and set it up like that cause im sure u know how alot of the world is these days the kits on amazon aint thin its super ridget and if they do the same thing they will brake stuff now if they use small mud flaps its ok still should be abit closer but its mainly for if anyone who stombles on the video amd thinks its the same as the amazon kit they dont brake their stuff im fully awear that stuff will only be annoying smacking everything but all impeller mods will make the belt or belts work abit harder cause there is extra drag it didnt have
@@pattayperformance i havent tryed any cause to me a extra couple feet aint that important iv never had ice or anything im a impeller yet iv been going thru all kinda slush and stuff for years so far but anyone who wants to thats fine with me everyone is different i was hoping ud have a video of it before and after tho cause i have the same blower and wouldnt mind seeing the difference in heavier snow
I'm on my wife's iMac and I hear it perfectly clear and my volume settings aren't all the way up. I also just watched a snippet of it on my iPhone with no issues as well. Please check your device settings. Thanks for the view and comment and hopeflly you subscribed to my channel!
Jeff Dishaw What are you trying to do and why? Your question doesn’t pertain to my video so therefore I can’t accurately answer it. Thanks for the view and comment, hopefully you subscribed to my channel
Excellent. I was entertaining the same idea to more effectively discharge small rocks that will grind away in the gap between the impeller and housing. Discharging wet snow would be a bonus.
Did you do the mod? If yes how do you like it?
Heck ya! Just did this mod to my new St224! Throws snow at least ten feet farther down the lane! Can’t wait to see how she goes in slushy stuff! Pretty sure I know what’s gonna happen!
Best bang for you buck mod to any machine!
This mod will help any two stage snowblower achieve betterer performance for sure. Did it to my old 5.5 hp Yard Man and made a huge difference! Like he said take different size bites and see where she performs best then your good to go! My mod has been five years running with self tapping sheet metal screws and tire sidewalls. Holding up fine!
Got it from a Nieghbor that moved away in trade for some work on his truck and 300 bucks. Hadn’t really looked at the thing closely but new it threw snow further than mine! Lol! live and learn! It is like new. One thing I’d like to fix is the low idle. Whenever it’s warm and I turn the engine speed down it won’t go all the way to idle. I feel like the dial might break . Is there a way to fix this issue. More folks have to be having this issue??? Thanks
I see this video was posted a while ago but figure i worth asking if you are still using the same machine and how it held up
Customer is still using it and very happy with it. Remeber to just use the low gears don't go to higher gears so you don't run the risk of snapping the plastic console
I have some 3/16 thick rubber conveyor belting, do you think it would work for this modification? Also have you had any issue with the sheet metal screws stripping out over time? Suppose you could always bolt on later if they did.
I had someone use 1/2” thick rubber and said it works great but won’t know how well until snow falls.
I have had ZERO issues with sheet metal screws. My ariens are 5-6 years with impeller mod and still holding up well with commercial use 🔧🦅🤙🏻🇺🇸
This year due to WUFLU I can’t get the Mudflaps (MF) I have been using for years. I had to switch to a different supplier. The flap is thicker and I like it! Issue with the new and thicker MF, is on some machines the impeller is made of plastic and on those I have to NUT and Bolt it
Thanks for the view and comment, hopefully you subscribed to my channel and keep me updated on your project 🔧🤙🏻🇺🇸🦅
Thanks for the video and the great idea...I have the 227 and am constantly clearing slushy snow out. Is that what caused my drive belt to slip off?
This will solve the slushy problem and extend belt life. Your belt is slipping off bc it is stretched/worn. Try and adjust the tensioner or just replace the belt.
Thanks for the view and comment, hopefully you subscribed to my channel 🔧🤙🏻🇺🇸🦅
Do you have (or know of) a video on removing the impeller for the Husqvarna 224/227? As I was looking at the impeller to make this mod I realized the fins were barely hanging on. But I can’t seem to break the nut on the impeller pulley wheel. I’ve been turning counter clockwise but am starting to round the nut. It’s not supposed to go clockwise is it? Thanks
@@christopherhallam1507 are you on Instagram? You don’t need to remove the impeller to mod it.
@@pattayperformance thanks for the reply...need to replace it because the fins are cracked and separating from the hub
@@christopherhallam1507 send me photo! Are you on Instagram?
Question: I have been getting objects wedge between my impeller and bucket and it damages the bearing on this husqvarna. Now the bearing doesn't seat tight into the housing. Not sure the housing is worn. If the bearing doesn't sit tight in housing the auger shaft will have play. I fould thing as I tighten the pulley it would pull the auger shaft tight so the bearing doesn't slip out. Have you seen this issue?
No but I would add a brace to auger gear box to the housing.
Great video, I was wondering if the propeller play was normal, but your does the same thing @ the 25min mark.
That’s great! I don’t like play at all. There has to be some tolerance but I wish it was a little tighter!
Thanks for the view and comment, hopefully you subscribed to my channel 🤙🏻🦅🇺🇸🔧
Looking for advise on how to replace the impeller on my Husqvarna st224 snowblower. I sucked in a big rock from my gravel driveway and it’s bent beyond repair
I’m really sorry to hear that! Surprised the sheer pins on the impeller didn’t break to protect the impeller.
Pick up basic tool set with metric and standard sockets and wrenches, hammer and a few punches.
If you have a jack stand…use it support the console part/frame where the motor is mounted.
Get Jack stand into place
Split machine is half (make sure all your cables and chute is disconnected first).
You will have the auger housing by itself now. Remove the big auger pulley…so it should be the bearing and shaft. Remove the bolts on the side of each auger housing. See if the whole ASM slides in and out. If it does pull it out…remove sheer pins…slide impeller off. Get wire wheel or brush and clean the shaft. COVER IT IN ANTISEIZE…install new impeller and reverse the process to install.
Both my wife and I have Covid…if you get a point where you need help send us a message on Instagram and we can do a live video chat to walk you through where you are stuck
Thanks for the view and comment, hopefully you subscribed to my channel 🤙🏻🦅🔧🇺🇸
@@pattayperformance thanks so much for the input,,,, I’ll give it a shot this weekend and let you know how I make out
Over time it rusts out from drilling them hole in augur and then you have buy new parts to fix it
George Drake
Yes, BUT you will greatly reduce the risk if you follow my regiment. Part of my maintenance on the machine is cover in oil before being put away, before snow hits and just before I use it.
Reward outweighs the risk in this case. This machine is made by AYP. Machine will fall apart before the impeller does.
Thanks for the view and comment. Hopefully you subscribed to my channel.
@@pattayperformance Just bought one and agree POS!
@@richardcabitto5108 it beats shoveling...what issues are you having? Let’s work through it...
Thanks for the view and comment, hopefully you subscribed to my channel 🔧🤙🏻🇺🇸🦅
No real issues except I did not realize this model does not provide the levers to unlock hubs to make turning it around much easier than ganking it about! Really messed up my back on the first snow here a month ago ! I was freaking out! Lol! Nothing I can do about though. Had an old yard man with 5.5 horse Tecumseh with the pin on the axle you could switch spots with for positive traction or open differential action! It was given to me and I loved it ! Especially after I did the impeller mod! Used it for years and gave it away a couple months ago when I got this one! Dang it. I’m going to do the mod to this one but sure wished I had realized drive/steering issues before buying this one but agreed, it is better than shoveling! Cheers and merry Christmas! Thanks for helping all of us yolkheads out here!
@@richardcabitto5108 if your willing to learn, I’m willing to teach! Where did you buy your machine from? They didn’t have a display model?
Glad our paths crossed..through my channel, you can score a snowblower with power steering and cheap and sell yours! Hopefully you end up with cash in your pocket when it’s all done!
Love the impeller mod! 🇺🇸🤙🏻🦅🔧
Great Vid, what's the model /year
I'm lookin for a ST224P,
Cant find one
Thank you! Husqvarna still makes these machines. You can buy brandy Spanky new or get one second hand! There is nothing special about this machine...very similar to Troy Bilts and Craftsman’s just a different color. Even a Cub Cadet!
Thanks for the view and comment, hopefully you subscribed to my channel 🤙🏻🇺🇸🔧🦅
Yah all the same for the last few years. Just make sure you get the upgraded one with steering assistance!
Think I may do this but I would take a bit more time and use stainless materials with locking nuts. Just saying ;)
It’s going to rust! Believe me, just use the self tappers and DO NOT FORGET coat the machine with some sort of lube before you blow!
Don’t think...just do it and THANK ME LATER!
Thanks for the view and comment, hopefully you subscribed to my channel 🤙🏻🇺🇸🦅🦅
Nice video bro. But I have the same snowblower and I have a problem, I don’t have the stick for the change oil , y see your machine don’t have one to
Thanks Man! NICE SNOW BLOWER :) Dip stick maybe a small yellow knob that is twisted dirtectly onto the block. Let me know if that helps or if it doesn't!
here is a link to a tune-up HOW TO that including changing the oil
thanks for the view and comment, hopefully you subscribed to my channel
th-cam.com/video/lePPd1ZU1Gw/w-d-xo.html
Great video, thanks for sharing
Let me know how much you enjoy it!
Thanks for the view and comment, hopefully you subscribed to my channel.
Are you tested this project in snow?Engine sounds like,"go on knees"
Absolutely and is a game changer! I wouldn’t own a snow blower with out this mod! It is a night and day difference.
If you go through my channel you will see the following makes with this mod in action...
Ariens
Toro
Lawnboy
Snow Tek
Craftsman
Poulan
Thanks for the view and comment, hopefully you subscribed to my channel.
@@pattayperformance ok,i must check your other videos.I have got canadiana snowblower with Honda gx140 engine.Old and shit Tecumseh engine goes broken and I have old terrain virbra engine,Honda.I am using blower with Honda about 4 winter and its one pull start engine.Greetings from Santa Claus hometown, Finland!
I got the same snowblower why would you need to do all that as it shoots the snow 30 to 40 feet with out doing that you may just need a new belt
Where we live we get heavy wet snow where your stock machine is useless and belches out snow if you don’t get it before the rain hits.
Besides...ever heard of Tim Allen?
Thanks for the view and comment, hopefully you subscribed to my channel 🔧🇺🇸🤙🏻🦅
I did i work on small engines snowblower and lawn equipment iam up here in canada lot heavy wet snow here
@@georgedrake1430 that’s awesome! Modify it and thank me later! I have numerous videos showing increased performance! 🤙🏻🇺🇸🦅🔧
@@pattayperformance i seen it done on older blower but most newer ones do not need it i got the same blower as you do its 3 years old just adjust the belt and cable yearly and it works great
@@georgedrake1430 That's fantastic!
I have a question to anyone who owns one of these or knows why my GEAR 80T DRIVEN sprocket keep separating and then my snow blower no longer drives! It is a bit of a pain in the ass to get into and place it back together for another 20minutes of throwing and then its off again so frustrating. Please if anyone knows reply to me and you will be forever loved lol!
That sprocket should be held in place by a pin,bolt,clip. Some of the are a keyway...have you checked your parts break down and compared to what’s actually on your machine?
Thanks for the view and comment, hopefully you subscribed to my channel 🤙🏻🦅🔧🇺🇸
@@pattayperformance I most certainly have subscribed =) tyvm for replying so quick! I have reviewed the manual they gave me and its all there. Its a 2 pc sprocket and the top half is the one walking off not the bottom. I wish I could post pics here lol.
@@KianaShalix are you on Instagram or Facebook?
@@pattayperformance ok we have an instagram now lol Kianashalix
Still supposed to leave a gap ....your going to rip all the paint off the inside of the drum .
1MM OR Even 2mm between the wall and rubber ...
Please don't leave a gap. If you properly maintain your machine this will NEVER be an issue.
Thanks for the view and comment, hopefully you subscribed to my channel!
I agree, there is no reason to leave so much overlap of the rubber material. Two mm gap is more than sufficient to get the job done without tearing off the inner paint on auger wall. Additionally, there are silicone sprays with teflon and other sprays that help prevent the snow from sticking to the auger and moving parts. Preventative maintenance means don't cause future issues that need further maintenance due to improper installation in the first place
@@kcstereo
I will continue to disagree, you leave a gap you are defeating the purpose the purpose of the modification. Here we are year 6 with Commercial Used and Abused Ariens with the Impeller modification done right and zero issues. They are all still chuckers and no rust. Even with out the impeller modification you should be coating the inside of the machine with oil based spray...even Pam will do. You can try ceramic coating but to me the effort isn’t worth the results.
You hit the nail right on the head!
Preventative maintenance is key...since you own such a cheaply made machine it’s more important than ever to address scrapes and scratches before they turn to rust...rust turns to rot.
Thanks for the view and comment, hopefully you subscribed to my channel 🦅🤙🏻🔧🇺🇸
@@pattayperformance I'm glad we can agree to disagree
@@kcstereo Happy New Year! I enjoyed our exchange and looking forward to more. Together we learn🦅🤙🏻🇺🇸🔧
About to pick one up for $500. Still has the plastic on it
Flip it and buy an ariens
How bad is it?
@@jerryoverfelt2043
th-cam.com/video/GkOYcqlascU/w-d-xo.html
@@jerryoverfelt2043
th-cam.com/video/znnRqCA7kWQ/w-d-xo.html
This is how u brake belts faster u do not have it hanging over the edge ur suppose to have it just touching the wall of the impeller spot so it dont drag a ton but does the same job just better and it dont brake plastic in the cold and other stuff cut them the right way 0 hanging over the edge
Thanks for stopping by but you are in correct.
Have plenty of machines out there to prove it.
Belts
Bearings
Gear Boxes are good to go. I don’t use thick rubber…the type I use is just perfect where it’s spring which increases snow throw distance.
If you go to thick YOU may run into issues. I’ve been using the same thickness for the past 8 years 🔧🦅🇺🇸🤙🏻
@@pattayperformance i only said it for ppl who go on amazon get a impeller kit and set it up like that cause im sure u know how alot of the world is these days the kits on amazon aint thin its super ridget and if they do the same thing they will brake stuff now if they use small mud flaps its ok still should be abit closer but its mainly for if anyone who stombles on the video amd thinks its the same as the amazon kit they dont brake their stuff im fully awear that stuff will only be annoying smacking everything but all impeller mods will make the belt or belts work abit harder cause there is extra drag it didnt have
@@RCman9291 I encourage people to make their own. Impeller kits on Amazon are JUNK
@@pattayperformance i havent tryed any cause to me a extra couple feet aint that important iv never had ice or anything im a impeller yet iv been going thru all kinda slush and stuff for years so far but anyone who wants to thats fine with me everyone is different i was hoping ud have a video of it before and after tho cause i have the same blower and wouldnt mind seeing the difference in heavier snow
I can't hear you.
I'm on my wife's iMac and I hear it perfectly clear and my volume settings aren't all the way up. I also just watched a snippet of it on my iPhone with no issues as well. Please check your device settings. Thanks for the view and comment and hopeflly you subscribed to my channel!
@@pattayperformance when you take your two side bolts off of each side of your propeller how do you get that whole unit the slide out
Jeff Dishaw
What are you trying to do and why? Your question doesn’t pertain to my video so therefore I can’t accurately answer it.
Thanks for the view and comment, hopefully you subscribed to my channel
@@pattayperformance I'm trying to get my impeller out
Jeff Dishaw
You need to split the machine in half. Remove the Auger pulley and bearing. Also unbolt the Auger shaft on each side of the chute