GREAT VIDEO!!!I stumbled on this 4 months ago on ebay and took a chance and bought it.I put it on several auction cars that were guinea pigs, to see how the application was.I then put it on my 05' CRV 3 months ago.Still going strong, I put 2 coats on it also.Nothing sticks, easy as hell to clean. And a super slick surface....I HIGHLY RECOMMEND!
I use these cheap coatings for plastic trim, fender wells, etc. on budget detail packages that prioritize durability and have been nothing but impressed. But I still had never applied it on paint. I finally decided to coat half the hood of my daily driver out of curiosity.. That was 11 months ago, and protection is still 95% intact! I still don't use it on paint professionally, but I wouldn't be afraid to. I use my own suede towels, blocks and low pile microfiber towels to apply and remove. But everything else about the product applies and performs almost as well as high end coatings. Applying coatings is like painting, it is allll in the preparation. If you decon. properly (strip wash, iron remover and/or clay) and machine or even hand polish (use a pure polish free of fillers and sealants), and use a proper surface prep solvent before application, you're going to be successful. You can't assign blame to any protection product if you don't give it the proper surface to bond to. Long term durability on paint I still cannot say past the 12 months. I'm seeing about 8 to 10 months on black plastic trim before the color starts to fade, which is very impressive. For the money, you cannot go wrong. A great way to ease into the semipro level of coating paint protection with very little money invested.. 👍👌✌
Just found this video while looking for something to show to a friend how to apply the MR-FIX coating. I applied this to my car almost 2 years ago (21 months) and it's still working. Not as good as when 1st applied, but still at around 80% of when 1st applied, the "beads" are smaller and take a little longer to go. As an example when new water either ran off completely or made large beads, which ran off as soon as the car started to move , now the beads are smaller and more of them, takes around 1-2 minutes driving then all clear again. Truely an absolute bargain. Would I apply this to a brand new luxury car? YES without any hesitation.
Maybe you could "refresh" the coating by spraying some spray coating on? I just got a spray coating thought it was ceramic coating but after application it works pretty nice as well, the site says last between 3~6 months so maybe you could use it to maintain your coating every season or so. Just spray on surface, spread with sponge, and wipe off with cloth. No caking or anything.
Awesome video, man! Thank you for doing this for all of us. I know firsthand the time and effort involved in making,shooting, and editing these types of 10min videos and it’s great you did. I’m sold on the coating and before this I was on the fence
9H is not bad at all, mine lasted close to 3 months where I live in California its always sunny so that's probably why it lasted longer and I have my cars garaged. You can also tell that it crystalizes when you apply 3rd layer to it which is good because it will protect your car paint against minor scratches. I would recommend this product.
I ordered this for my motorcycle. Its so dusty where i live so i thought I'd give it a try. Great video. Explains the F upped directions that came with it. Ebay $8, 2 bottles.
Thanks a lot for the video. I am a car detailer and I was looking for a nice coating and cheaper at same time and this will do the job without breaking your pocket. The explanation and the demonstrations worth more than thousand words. And yes I would like to see if you leave an untreated part after a rainy day leave the water to dry out exposed to the sun and see if the treated part will leave some water marks or not. That will be great, or another demonstration could be if you have some mud splashed on the treated paint and that mud dried out so how will that be. It will be amazing to check those situations with this coating. Thanks in advance.
Nice video and breakdown of the application steps and your overview. But I’d strongly recommend that no one apply any ceramic coating outdoors where the vehicle is exposed to airborne contaminants.
This is probably crazy but I am literally applying this product to my Tesla right now. 130k car! I’m going to upload a video of the whole process including clay barring, buffing, & Applying it. I bought three bottles for $60 and it seems to be a little newer version than yours but I’m going to put all three bottles on. We’ll see how it goes thanks for the video. And keep an eye out for mine in about a week.
If you use 3 bottles on one car you're doing it wrong. Thin lines, do 2 coats. You won't even use 1 full bottle on your tesla. Let me know how it goes!
ThoseDetailingDudes OK thanks for the advice. I just read on Amazon one guy said he had to do like three coats to get it to really beed. I’ve still got to run my buffer over the car with finishing compound which is what I’m doing right now then clean it with alcohol and I’ll get to applying it. Do you think it is safe to use on the glass? Or the chrome?
Tesla Freak yes safe on glass, unsure about chrome. I think 3 coats is overkill, but do 1, buff then wait 1 hour, do the next, then buff. Remember no water or saturation for 24-48 hours. No soap or chemicals for 7 days.
@@scorpiojuan1966 He did a fine job. Covered all the main points. Application was decent at best but it clearly worked...I'd also blame the cloth he was using. But it clearly worked fine...
What you should have done is your initial tests with water and all. But then do a follow up video where you follow the instructions to the letter and not even get it wet for 3 days just to see if it makes a difference. Then, its been over a year, do a follow up and let us know if this car is still repelling dirt and water.
The crazy thing is I get over 9 months of water beading from a sealant like wolfgangs With proper prep. Adding a wax on top of that after it cures I can probably hit the yr mark. I'm at 11 months on one application and the car still is a breeze to wash and dry because of the hydrophobic properties left on the car. Now with that said, this is actually looking to be easier to put on and buff out.
Very good video! Took me ages to find a proper genuine instruction step by step guide like this. Still lots of questions which i cant find an answer to. What about glass? In those ads it looks like its been applied to the windshield as well. Chrome or plastic parts? Then can you re use the sponge?
I put this on my Porsche, and it is doing very well so far. I'll let you know latter on if it keeps preforming as it is now. I bought another type ceramic coating similar to this one to test on my other car called Shine Armor quick coat for $19.99, it will be interesting to compare both.
Thank you, that was very helpful. I was trying to determine whether or not I should apply it to my Audit Q5, but I think you answer that. I will be looking at your other videos. Thanks again.
Bought this product from China. Had a gt350 mustang shipped to the UK. So apprehensive. How many applications do you think to an average car. May try it out on a Guinea pig car before mine. But thanks for a great demonstration though.
I have bought some and I read the instructions and it said don’t touch with water or dust for 24 hours, did this work very long after putting water on it so soon?
I did a comparison between this stuff and the F-11 and have to say the F-11 is better all the way around. Easier to apply with not so many steps and feels much slicker once applied. I am very disappointed in the 9H but it won't go to waste as I'll just use it up on my pick up and daily driver.
Hi dude, nice video, I have 2 questions tho : 1) Will it work on plastic fairings, like on sport motorbikes for example ? 2) Is it mandatory to wipe it after having it applied ? Isn't the protection going to last longer if the product is not wipped ? Thanks !
I have a question, some videos show they spray water in the cloth before the 9H Nano drops, others do no spray water. Need to be wet the applicator cloth or no.
I've been detailing cars since 1997 it's not a bad product but if you take care of your vehicle applying the proper wax high-speed Orbiter machine I think you get better results.
I am interested in getting a ceramic coating on my 1992 Camaro Z28. I have some questions if I may: 1. Do they also put it on the windows and mirrors? 2. I currently use TOPCOAT F11 and LOVE IT.. But which the shine remains, the slickness does disappear until re-touched up or apply water and buff dry.. It looks like it will cost me around $2000+ cdn to 2-step paint correct, and applying a cermaic coating: SLICKNESS remains the entire time or is it like F11 where the shine is there but the slickness dissipates and either re-add more F11 or wipe with water and dry to get it back.. There is a local shop here in Vancouver BC Canada that will do it for $2,000cdn Local shops quote: From $2000 Wash and decontamination Up to two stages of paint correction/polishing 4 layers of Ceramic Pro 9H Glass Shield 1 layer of Ceramic Pro Light Ceramic Pro Wheel and Caliper Ceramic Pro Rain front 3 windows I am in a LOT of car shows both IN and OUT and I always want the car's slick paint surface to be there as part of the showing of the car.. As a result, I am very curious if the SLICKNESS always remains there or do I have to touch up with some type of detail replenish product?
Would i be better off applying it using a microfibre cloth? And also if i was, claybar and polish then apply without the alcohol prior will this be fine? Thanks
Random question but what does it smell like? I've purchased a couple of bottles but don't think much of the seal on them! Mine smells like mint but did harden after dripping it on the my work desk,
Curious how it would differ if you washed, claybar entire car...the waxed one side and 9h nano coated the other? Yeah, any coating is going to look better than an unwahed unclaybarred controlled competitor
Hi, good basic video, interested in long term results, as i do have this product, and am lining up my 1989 Honda Legend Coupe for a coating !!!! all comments welcome.
Is polishing necessary before Ceramic Coat. Seems like I can clean and coat the car myself but polishing is out of my skillset. Should I get a detailer to polish the car and then apply it?
+summit sharma in an ideal world you would do at least a 1 step polish before a ceramic coating. But you can probably get away with alcohol wipe and coat
You've done weel on your video. I bought this one nearly a month ago, but until I watch this video Im hesitant to use. I bought it as I have some scratches in my car, could this coating will take off the scratch as well? thanks
Nice video I think it would have been better if you had your car reversed onto your drive as it looks like it's on a little bit of a slop. But good video nice tips I've got this product at home
You wrap the towel around the sponge. It's OK on glass, including the windscreen but not on the drivers side, when using wipers it makes a mist on the screen as the blade passes, it clears instantly but still not desirable.
Hey man, could you give me the link of the product that you bought? Because yours seems to work. I bought it from a random seller on eBay, but the product did not really work, I tried applying it on a mirror, to test the product, but it did not work, the product does not get dry and has the aspect of oil in the mirror, blurring the image on the mirror. After 3 weeks I cleaned it with a towel paper and all the product was removed. PS: my product did not even come in a box like yours, it came in a plastic bag. Thanks
The one where it’s on my Facebook newsfeed, which is I think is the same stuff, same name everything, charges $19.99 and says it last’s 2-5 years....I have a hard time believing that. You said you wouldn’t put it on a Shelby, why not? Is it because it’s too soon to tell? I have a Toyota Avalon which isn’t saying a whole lot but I’m keeping it for the long haul, so I’m wanting to apply something that’s gong to protect and last. Can you do another test in about 6 months. Thank’s
Hey great video, I recently received one as well however i didn't receive any written information on how to use...can you post on how to use, from cradle to grave so to speak...
Anton Pierre the application is the same as any other ceramic coating. Try finding videos on other coatings being applied and follow their steps. Hope this helps thanks for the comment.
Thanks for this the instructions also say something about water making it harden and you are saposed to wipe it with a damp microfiber towel after. Not really sure what else is in the process. Any thoughts?
First of all you are supposed to use the little applicator thin sponge side to apply the formula then the small towels to buff it out after a few minutes of curing time.
GREAT VIDEO!!!I stumbled on this 4 months ago on ebay and took a chance and bought it.I put it on several auction cars that were guinea pigs, to see how the application was.I then put it on my 05' CRV 3 months ago.Still going strong, I put 2 coats on it also.Nothing sticks, easy as hell to clean. And a super slick surface....I HIGHLY RECOMMEND!
+Jeffrey Carson heck yeah! Thanks for the comment!
drTT Photography all products are different. This one specifically said apply to a moist towel
Jeffrey Carson how much did you use on 1 car?
Hey, how long does it last now?
I use these cheap coatings for plastic trim, fender wells, etc. on budget detail packages that prioritize durability and have been nothing but impressed. But I still had never applied it on paint. I finally decided to coat half the hood of my daily driver out of curiosity..
That was 11 months ago, and protection is still 95% intact! I still don't use it on paint professionally, but I wouldn't be afraid to.
I use my own suede towels, blocks and low pile microfiber towels to apply and remove. But everything else about the product applies and performs almost as well as high end coatings.
Applying coatings is like painting, it is allll in the preparation. If you decon. properly (strip wash, iron remover and/or clay) and machine or even hand polish (use a pure polish free of fillers and sealants), and use a proper surface prep solvent before application, you're going to be successful. You can't assign blame to any protection product if you don't give it the proper surface to bond to.
Long term durability on paint I still cannot say past the 12 months. I'm seeing about 8 to 10 months on black plastic trim before the color starts to fade, which is very impressive.
For the money, you cannot go wrong. A great way to ease into the semipro level of coating paint protection with very little money invested.. 👍👌✌
Just found this video while looking for something to show to a friend how to apply the MR-FIX coating.
I applied this to my car almost 2 years ago (21 months) and it's still working.
Not as good as when 1st applied, but still at around 80% of when 1st applied, the "beads" are smaller and take a little longer to go.
As an example when new water either ran off completely or made large beads, which ran off as soon as the car started to move , now the beads are smaller and more of them, takes around 1-2 minutes driving then all clear again.
Truely an absolute bargain.
Would I apply this to a brand new luxury car? YES without any hesitation.
Gordon Bennett thanks for the comment it helps me the step to do it
pls share how many coat do u put
Maybe you could "refresh" the coating by spraying some spray coating on? I just got a spray coating thought it was ceramic coating but after application it works pretty nice as well, the site says last between 3~6 months so maybe you could use it to maintain your coating every season or so. Just spray on surface, spread with sponge, and wipe off with cloth. No caking or anything.
Awesome video, man! Thank you for doing this for all of us. I know firsthand the time and effort involved in making,shooting, and editing these types of 10min videos and it’s great you did. I’m sold on the coating and before this I was on the fence
9H is not bad at all, mine lasted close to 3 months where I live in California its always sunny so that's probably why it lasted longer and I have my cars garaged. You can also tell that it crystalizes when you apply 3rd layer to it which is good because it will protect your car paint against minor scratches. I would recommend this product.
Thanks Bud. Did try on my Q7 all over the result was awesome. Wish I could have uploaded the pics.
I ordered this for my motorcycle. Its so dusty where i live so i thought I'd give it a try. Great video. Explains the F upped directions that came with it. Ebay $8, 2 bottles.
This is the first video i found! Excellent ! Greetings from the Netherlands! Nice GTO Dude!... Thanks for this cool video.
Thanks a lot for the video. I am a car detailer and I was looking for a nice coating and cheaper at same time and this will do the job without breaking your pocket. The explanation and the demonstrations worth more than thousand words. And yes I would like to see if you leave an untreated part after a rainy day leave the water to dry out exposed to the sun and see if the treated part will leave some water marks or not. That will be great, or another demonstration could be if you have some mud splashed on the treated paint and that mud dried out so how will that be. It will be amazing to check those situations with this coating. Thanks in advance.
Angel Yerovi thanks for the comment! Did you see my updated video and my coating giveaway?
Just did my headlight and tailight. Thank for the instructions
Nice video and breakdown of the application steps and your overview. But I’d strongly recommend that no one apply any ceramic coating outdoors where the vehicle is exposed to airborne contaminants.
That’s a nice looking Holden Monaro there son, you can thank Australians for building that and sending it to you with a chev badge on it.
Pontiac* gto*
@@johnmandude1 That is what you Americans call it. Produced in Australia for many years Holden Monaro. Now you have the facts.
I have used this product on my saab900 saab 93
And BMW series 1
And a vauxhall mokka I found it really good
i like that trial and error attitude. Right on. Thanks. for the video. Good job.
+Tim Marx thanks Tim! I appreciate the support! Makes me happy
This is probably crazy but I am literally applying this product to my Tesla right now. 130k car! I’m going to upload a video of the whole process including clay barring, buffing, & Applying it. I bought three bottles for $60 and it seems to be a little newer version than yours but I’m going to put all three bottles on. We’ll see how it goes thanks for the video. And keep an eye out for mine in about a week.
If you use 3 bottles on one car you're doing it wrong. Thin lines, do 2 coats. You won't even use 1 full bottle on your tesla. Let me know how it goes!
ThoseDetailingDudes OK thanks for the advice. I just read on Amazon one guy said he had to do like three coats to get it to really beed. I’ve still got to run my buffer over the car with finishing compound which is what I’m doing right now then clean it with alcohol and I’ll get to applying it. Do you think it is safe to use on the glass? Or the chrome?
Tesla Freak yes safe on glass, unsure about chrome. I think 3 coats is overkill, but do 1, buff then wait 1 hour, do the next, then buff. Remember no water or saturation for 24-48 hours. No soap or chemicals for 7 days.
ThoseDetailingDudes Gotcha thank you for your help I will keep you updated
Tesla Freak have you done if yet mate?
I've used it, works great, easy to apply, and works.....
Hi I was checking back with you on the ceramic coating video you did. How long did it last? Please let me know . Thanks Bobbie
its on his channel, go to the channel page and search "fix"
Sorry but look at other videos. This guy has no idea what hes doing. Good effort but all wrong. Seriously look at other videos before you make a mess.
@@scorpiojuan1966 He did a fine job. Covered all the main points. Application was decent at best but it clearly worked...I'd also blame the cloth he was using. But it clearly worked fine...
Thanks for trying to demo this product for all of us.
The intro is just amazing saying no ones applied and I’ll be applying to my vehicle 😎
What you should have done is your initial tests with water and all. But then do a follow up video where you follow the instructions to the letter and not even get it wet for 3 days just to see if it makes a difference.
Then, its been over a year, do a follow up and let us know if this car is still repelling dirt and water.
After polishing did you wipe out the out with some rubbing alcohol? To remove any grease or oil from your polishing ?
The crazy thing is I get over 9 months of water beading from a sealant like wolfgangs With proper prep. Adding a wax on top of that after it cures I can probably hit the yr mark. I'm at 11 months on one application and the car still is a breeze to wash and dry because of the hydrophobic properties left on the car. Now with that said, this is actually looking to be easier to put on and buff out.
I put it on my car just on a year ago. Still working 90% or better. I haven't had to wax and washing is easier.
Awesome..tks for the video..I just bought some and I'm iffy about putting it on my R1...
Very good video! Took me ages to find a proper genuine instruction step by step guide like this. Still lots of questions which i cant find an answer to. What about glass? In those ads it looks like its been applied to the windshield as well. Chrome or plastic parts? Then can you re use the sponge?
I put this on my Porsche, and it is doing very well so far. I'll let you know latter on if it keeps preforming as it is now. I bought another type ceramic coating similar to this one to test on my other car called Shine Armor quick coat for $19.99, it will be interesting to compare both.
So which one do you prefer??
You said that the hand towels for the applicator are garbage. What kind of towel did you use instead?
Thank you, that was very helpful. I was trying to determine whether or not I should apply it to my Audit Q5, but I think you answer that. I will be looking at your other videos. Thanks again.
Bought this product from China. Had a gt350 mustang shipped to the UK. So apprehensive. How many applications do you think to an average car. May try it out on a Guinea pig car before mine. But thanks for a great demonstration though.
I have bought some and I read the instructions and it said don’t touch with water or dust for 24 hours, did this work very long after putting water on it so soon?
I did a comparison between this stuff and the F-11 and have to say the F-11 is better all the way around. Easier to apply with not so many steps and feels much slicker once applied. I am very disappointed in the 9H but it won't go to waste as I'll just use it up on my pick up and daily driver.
Great video mate. Bought some of this on a whim. May just yet use it on my Porsche 😀
Hi dude, nice video, I have 2 questions tho :
1) Will it work on plastic fairings, like on sport motorbikes for example ?
2) Is it mandatory to wipe it after having it applied ? Isn't the protection going to last longer if the product is not wipped ?
Thanks !
Absolutely! after 5-10 minutes depending on climate you need to wipe it off gently with a microfiber cloth not to remove completely..
I have a question, some videos show they spray water in the cloth before the 9H Nano drops, others do no spray water. Need to be wet the applicator cloth or no.
no water
Mr.fix instructions in the box, says wet the cloth and spray The paint with water.
@@brightopener that's right, very confusing.
spray the applicator cloth with water, and a little mist on the car
How did you whipe it off? Wet rag??
Great vid actually showing what's gonna happen with mud!
Did you use the whole bottle on just what we saw or was there more left
I've been detailing cars since 1997 it's not a bad product but if you take care of your vehicle applying the proper wax high-speed Orbiter machine I think you get better results.
I am interested in getting a ceramic coating on my 1992 Camaro Z28. I have some questions if I may:
1. Do they also put it on the windows and mirrors?
2. I currently use TOPCOAT F11 and LOVE IT.. But which the shine remains, the slickness does disappear until re-touched up or apply water and buff dry.. It looks like it will cost me around $2000+ cdn to 2-step paint correct, and applying a cermaic coating:
SLICKNESS remains the entire time or is it like F11 where the shine is there but the slickness dissipates and either re-add more F11 or wipe with water and dry to get it back.. There is a local shop here in Vancouver BC Canada that will do it for $2,000cdn
Local shops quote: From $2000
Wash and decontamination
Up to two stages of paint correction/polishing
4 layers of Ceramic Pro 9H Glass Shield
1 layer of Ceramic Pro Light
Ceramic Pro Wheel and Caliper
Ceramic Pro Rain front 3 windows
I am in a LOT of car shows both IN and OUT and I always want the car's slick paint surface to be there as part of the showing of the car.. As a result, I am very curious if the SLICKNESS always remains there or do I have to touch up with some type of detail replenish product?
+Paul Lodge this is not the coating for you. This isn't comparable to a $2000 detail.
can u provide a link to this from ali express? I dont wnt a fake mr fix one which are being sold everywhere.
can I use it on color sticker film?
Good video mate. Would love to see monthly updates on this product.
Would i be better off applying it using a microfibre cloth?
And also if i was, claybar and polish then apply without the alcohol prior will this be fine?
Thanks
Can I put hyrdophobic wax on the other day after I apply ceramic coating?
Would this product work on a clear plastic screen; something to remove visible scratches?
How long did it last?
Random question but what does it smell like? I've purchased a couple of bottles but don't think much of the seal on them! Mine smells like mint but did harden after dripping it on the my work desk,
it had a strong smell almost like alcohol, and yes it will harden and crystalize when it's out of the bottle or stored in hot or cold environments
Can this be applied on tinted windows to block UV rays. Instead of buying ceramic window tint. Which can be expensive!
no, totally different things
Curious how it would differ if you washed, claybar entire car...the waxed one side and 9h nano coated the other? Yeah, any coating is going to look better than an unwahed unclaybarred controlled competitor
Hi, good basic video, interested in long term results, as i do have this product, and am lining up my 1989 Honda Legend Coupe for a coating !!!! all comments welcome.
Does this product eliminate prior scratches?
No it doesn’t
Question I have applied this on my car. How can you remove this to use another ceramic coating on the car?
polish
Is polishing necessary before Ceramic Coat. Seems like I can clean and coat the car myself but polishing is out of my skillset. Should I get a detailer to polish the car and then apply it?
+summit sharma in an ideal world you would do at least a 1 step polish before a ceramic coating. But you can probably get away with alcohol wipe and coat
Cool thanks ... is 1 bottle enough to do entire car?
William De La Pena yes it’s plenty
Nice video nice coating... Durability? What do you think?
I used your basic instructions. Thank you for the video.
Buy online here
www.ebay.com/itm/323052948292
EBay???? Go to AliExpress and get it for a fraction of that cost.
You've done weel on your video. I bought this one nearly a month ago, but until I watch this video Im hesitant to use. I bought it as I have some scratches in my car, could this coating will take off the scratch as well? thanks
Tess O'Brien no it will not take the scratches off
so how long it stand??
Nice video I think it would have been better if you had your car reversed onto your drive as it looks like it's on a little bit of a slop. But good video nice tips I've got this product at home
Great video, in the UK and have been waiting to see if this is a good product or not. Thanks.
Hi. . . Do you have some update on the longevity of this product?
Its garbage
@@leschar1 how many months did it last?
How many layer can i apply for this?
Please i need.to know how many time you leave the coat on the surfaces before remove it
I must apply under to sun light ? This kind sualy dont appilied under to sunlight ?
I wouldn't have applied it to the windshield and I think you apply it with the paper just the sponge.
You wrap the towel around the sponge. It's OK on glass, including the windscreen but not on the drivers side, when using wipers it makes a mist on the screen as the blade passes, it clears instantly but still not desirable.
I would be afraid to put it on my brand new car (on the paint), but I would use it on rims maybe or tail/headlights...
hi guys, iv used this on my car,it was cool weather and it didnt setits cloudy and peeling,,any tips on removal or remedy? thamks
What should i use to remove it? Because i screwed up preiously. Now my car looks awful
Mentis Ng machine polish
great video. its ok to do more than one coat? thanks
Dennis Allen yes! People recommend 2 coats. Please like and subscribe
Hey man, could you give me the link of the product that you bought? Because yours seems to work.
I bought it from a random seller on eBay, but the product did not really work, I tried applying it on a mirror, to test the product, but it did not work, the product does not get dry and has the aspect of oil in the mirror, blurring the image on the mirror. After 3 weeks I cleaned it with a towel paper and all the product was removed.
PS: my product did not even come in a box like yours, it came in a plastic bag.
Thanks
It’s all junk now
@@leschar1 There is no good Mr Fix anymore?
The one where it’s on my Facebook newsfeed, which is I think is the same stuff, same name everything, charges $19.99 and says it last’s 2-5 years....I have a hard time believing that. You said you wouldn’t put it on a Shelby, why not? Is it because it’s too soon to tell? I have a Toyota Avalon which isn’t saying a whole lot but I’m keeping it for the long haul, so I’m wanting to apply something that’s gong to protect and last. Can you do another test in about 6 months. Thank’s
Is 30-50ml enough for a whole car?
30 should be enough for 2 coats on a average car.
Hi there, you said before you put Mrfix coating, wash , clay bar and polish. What do I do for polish? Is this polish like waxing? Thx
You need to polish with a buffer machine and a compound. Waxing is something different
bought this so keen to see what happens after time :-)
So, what happened? ;) Are you satisfied?
Hey great video, I recently received one as well however i didn't receive any written information on how to use...can you post on how to use, from cradle to grave so to speak...
Anton Pierre the application is the same as any other ceramic coating. Try finding videos on other coatings being applied and follow their steps. Hope this helps thanks for the comment.
Hey man, how is it doing so far? Does it still work? Could you do a video on how it is now? Thanks!
I used this ceramic but naw it too bad please how can I remove it? After 7 months
ako deno polish it off
ThoseDetailingDudes someone says it cannot removed by polish. Is it true?
@@akodenoheriri695 not true it will come off with a polisher
Can u give updates every day for the full year to show how it does as a daily driver?
+Brandon Daily that's the plan!
Did u apply it using water??
Great vid bro!! When you were talking about the application steps, what do you mean by “claybarred” it?
Brandon Apostol so before you can apply the product you want to wash, claybar, polish, wipe with alcohol and then apply.
I'd u dont know what clay barring a vehicle is please dont put on a ceramic coating on your car. Go watch beginner detailing videos.
I'mma use this on my bicycle lol, I wanna see if it's gonna help it stay brand new
Thanks for this the instructions also say something about water making it harden and you are saposed to wipe it with a damp microfiber towel after. Not really sure what else is in the process. Any thoughts?
Can you wax the car first before you apply the ceramic coating?
You need the ceramic to bond to the paint and the paint only. So short answer no.
If you do waxing , probably alcohol cleaning would be necessary.
First of all you are supposed to use the little applicator thin sponge side to apply the formula then the small towels to buff it out after a few minutes of curing time.
Where are the scratches? Before and after?
Thank you for taking the time to do this.
Hi, do you did the hardened test?
Great video.
Not in direct sunlight dude. And u do this for a living ? Just saying
good video !!
I have a question, first you have to polish the vehicle ...and then apply this ceramic coating ????thanks..
klaudio Moreno yes you want to clay bar, polish, then wipe with alcohol before applying.
ThoseDetailingDudes what kind of alcohol bro?
ThoseDetailingDudes You mean I can’t just wash it then apply it?
@@leschar1 sorry for my ignorance, but what do you mean with waxing the vehicle and then wipe it off with alcohol.
@@juniorarroyo7120 idk what you mean by waxing the vehicle before...? But you wipe with alcohol to remove any oils or waxes on the surface.
Thanks for the video. It helps decide if I should use this product or not.
Good video,very useful. Thank you brother
how many bottles are required to double coat the full Sedan ?
Dj Hash one bottle should do the trick. Don't forget to like and subscribe:)
Dj Hash 5 buckets will do
How many bottles do I need to coat a Dodge Durango 2011?
Christian Moreno 1 bottle!
1 bottle 2 coats?
Chevelle mustang gt?
How much quantity is needed for a sedan car?
Talha Tayyab one bottle. But buy a better product.
ThoseDetailingDudes can you recomend one for me
Talha Tayyab cquartz or gtechnic
ThoseDetailingDudes thanks appreciatiated
Hi. How many bottles to use in one car?
you need i bottle for a sedan if you want a double coat buy 2 bottles
Can you upload the link to buy it?
thanks!
THanks for providing this video, its great.
did you end up posting a video in 6 months?
no it's only been 2 months. next video should be out soon.
Thanks, i just realised when i looked at the date it was posted. So after 2 months, hows it going?
All the coating have to avoid water in first three days after your first coating. Then, you can have your second coating after 7 days.
+Chris Huang second coating 1 hour after the first. Avoid soap or other chemicals for 1 week.