If you could improve one thing about these tubes lights, what would it be? Thanks for watching! 🙏 Time Stamps Materials you'll need - 01:08 How to build these lights - 05:01
After watching a million diy videos, i Went and got some tube covers from home depot today. These are the best option IMO for govee lights since theyre 30mm apart.
If I want to make tubes of 1 or 1'20 meters long, what si the length of the led? How long is that in the video? The link to the tube doesn't work for me. I have govee lights in my studio and are great! What do you mean about 30 mm apart?
Thank you so so much!!!!!! This helped out a ton!!! Used this for my science fair project. My question was how do I make a interactive light show. I looked up videos and this one came up. Worked greatly!!! Thank you so much!
Love this video it's what I've been looking for. I kinda resent the concept of paying more to diffuse the leds than the cost of the lights themselves. Wondering if you can get thinner tubes even hosepipe style ones to make it a little less bulky.
Hi, I secured way to setup 10 led tube together and control them all together with an app , you suggest what / how to link them and control together and what to use for wifi controller and power supply ? Thanks
Pretty good! I wonder about the brightness though. They don't seem bright enough for use in an otherwise well lit environment. If these are the only lights in the scene they may work, but even then I don't think they would put out all that much light. Really good idea for DIY tho!
That may be true. Haven’t tested these in many light situations but I did have my ring light on full brightness and these were still vivid. Any brighter and I’d say they’d be washed out honestly. Thanks so much 🙏
Hey man, great video! I've been looking for something like this! Question though, is it bright enough for backlight like in those streamer vids? Is there a way to make brighter?
It looked like the holes in the caps that came with the tubes were centered. Is there a reason you didn't just use the centered holes so that the lights would be in the middle instead of on one side. Wouldn't that have made the LEDs diffused evenly and not had a back side of the tube?
I think I accidentally did that, I don’t remember at this point my reason 😅 in the end tho, the light was not diffused enough so I ended up pushing the dowel towards the back side into those grooves I made and then it diffused fine. Overall this was mostly an experiment and a learning experience. There are many things I’d do differently for sure
I’m trying to get started with the LED tubes while having zero knowledge of LED specs. I’m wanting to use these tubes for sports videos with a decent amount of slow motion 1/250 or even faster shutter speed. What spec/stat should I be looking at when buying LEDs to know if the refresh rate can handle this shutter speed without flicker?
I sanded the first one off camera because I planned to paint it but also to diffuse the light a bit more. Wanted to make sure both were the same so I still sanded the second one. Can use wax paper but when I tried it, it bled more light than I wanted. The wrap wasn’t perfect and I’m sure there’s way better ways of doing this. I kinda went in blindly and this is what I came up with 😅
Yeah you can and it works okay but it’s not 360° which I could have solved with some soldering etc. but I wanted to try it thins way and I needed them to be brighter
Running them along a dowel and making sure the LEDs are offset properly would have worked too. The chips on my strips have rather long traces which makes them difficult to wind around a dowel like this so if I end up doing a project similar to this, I will have to do as Neon Specter suggested. My strips have 32 LEDs per meter but I know that some LED strips are even more dense. The best solution will highly depend on what kind of strips you have.
@@BuildsWithV it's fine but mine is transparent without the wooden rod and the base is cement, i don't have proper tools so i just do it anyway, it almost cost a thing im mean all parts are scraps
Hey dude i just wanted to ask if you had to guess what is the wattage for the lian li strimer cables as i have a 750w powersupply and the estimated wattage on pc part picker is 518w without the cables so i just wanted to make sure its gonna be safe. also nice vid :)
For the Strimer cables I’m not too sure what they’re estimated at unfortunately. It should be perfectly fine, I have a 750w bronze psu as well and tons of other stuff in my PC without any issues. Upgrading to 850w gold soon to be safe cause I’m putting a 3080 in it, otherwise it’s fine
Yeah back then I tried it but I think I just used too many LEDs cause no matter what I tried I couldn’t get the individual LEDs to not be visible. Ended up using this and it worked but kinda dim. Maybe some day I’ll give this another shot.
Would be beter to use the frosted vinyl as opposed to white. You're losing a lot of light output having an opaque layer. As well, using an led strip that is 60led/m as opposed to 30
Any thoughts on sanding the exterior of the tube vs using vinyl? I wonder how it would compare in brightness to your eyes. Lol Tbh when you finished wrapping it in vinyl I clapped! not at all an easy feat, well done
I actually tried the sanding method and unfortunately the leds were still very visible through it. I tried various grits as well. I also tried the paint method and that works about as good as vinyl but a bit messy. The vinyl gave it a nice texture and overall the beat look with the matte finish. I did try gloss as well and it looked great but too shiny. Basically just settled on matte vinyl and looks great. Thanks so much 🙏 There’s a few small bubbles in the vinyl but 🤫 don’t tell anyone 😂
@@BuildsWithV i appreciate that reply. Just about to get going on a 1.7ft tube with my 144 3.3ft strip folded back to back and hopefully centered in the tube by suspension. That or cutting down and placing the half strips next to each other and taped to one side of the tube. Wanting to use this as a sconce so not too worried about the back side but more concerned brightness... now i'm kinda wondering if 360 light will give me more illumination then back to back
@@jaceace32 I’m honestly not too sure which way would provide the most like honestly. I wanted 360 degree lighting so I can show off the front to the camera and the back can illuminate the background or whatever it is I’m shooting. Since only about 50% of the leds will be facing the front I’d assume laying them down and facing as many as possible towards the front would provide the brightest lighting.
If you could improve one thing about these tubes lights, what would it be? Thanks for watching! 🙏
Time Stamps
Materials you'll need - 01:08
How to build these lights - 05:01
am so damn proud bro 2.05k subs 🥳🥳🥳🥳🥳🥳
@@yoda_playz3060 thanks so much 🙏
Buy diffuser tubes if you can find them; it saves you time.
Make it portable...do a usb instead of a plug
Use electrical tape instead of sticky tape.
Great video! Me and my friends played a drinking game that we take a shot every time he says “basically“ ….aaaaand BASICALLY we’re hammered. lol
Nice! Happy to help 😅
Basically we came for the basics. Great tutorial thorough bro thanks!!
After watching a million diy videos, i Went and got some tube covers from home depot today. These are the best option IMO for govee lights since theyre 30mm apart.
If I want to make tubes of 1 or 1'20 meters long, what si the length of the led? How long is that in the video? The link to the tube doesn't work for me.
I have govee lights in my studio and are great!
What do you mean about 30 mm apart?
Love your idea your genius bro
Thank you so so much!!!!!! This helped out a ton!!! Used this for my science fair project. My question was how do I make a interactive light show. I looked up videos and this one came up. Worked greatly!!! Thank you so much!
Oh wow I never thought anyone would use it for a project like that! That’s so cool, glad I could help 🙏🙌
Love this video it's what I've been looking for. I kinda resent the concept of paying more to diffuse the leds than the cost of the lights themselves. Wondering if you can get thinner tubes even hosepipe style ones to make it a little less bulky.
so BASICALLY this is a tube light tutorial
This whole thing is 🔥!
Thank you 🙏
The back is just another cool effect
Ikr
Good job, next time instead of wrap, use frosted glass spray paint, its absolutely perfect for this job
I was going to but wasn’t sure how well it would spread the light. I think the wrap did it really nicely. Still holding up till today
Basically this is the basics for a basic tube light🗽
This is awesome! Thank you!
Hi, I secured way to setup 10 led tube together and control them all together with an app , you suggest what / how to link them and control together and what to use for wifi controller and power supply ? Thanks
I did the same but 8 feet but I used Wax paper to cover and wooden bases with elbows to pass the cables and remain as a stand
2:25 ws2811 for 12v supply and ws2812b for 5v are the best and cheapest led strips.
Pretty good!
I wonder about the brightness though. They don't seem bright enough for use in an otherwise well lit environment. If these are the only lights in the scene they may work, but even then I don't think they would put out all that much light.
Really good idea for DIY tho!
That may be true. Haven’t tested these in many light situations but I did have my ring light on full brightness and these were still vivid. Any brighter and I’d say they’d be washed out honestly. Thanks so much 🙏
@@BuildsWithV thank YOU for creating this video!
Could you update the description because a few of the items are now not available. Great video tho mate
great vid!
Hey man, great video! I've been looking for something like this! Question though, is it bright enough for backlight like in those streamer vids? Is there a way to make brighter?
why would u buy a clear tube guard and do extra work instead of just buying a white, frosted, or diffuser tube guard?
There were none available at the time. This was just a little experiment for myself
It looked like the holes in the caps that came with the tubes were centered. Is there a reason you didn't just use the centered holes so that the lights would be in the middle instead of on one side. Wouldn't that have made the LEDs diffused evenly and not had a back side of the tube?
I think I accidentally did that, I don’t remember at this point my reason 😅 in the end tho, the light was not diffused enough so I ended up pushing the dowel towards the back side into those grooves I made and then it diffused fine. Overall this was mostly an experiment and a learning experience. There are many things I’d do differently for sure
@@BuildsWithV I wonder if you could add tubes of white baking paper or waxed paper on the inside of the tube to add more diffusion.
Basically Govee Dream Color leds would be perfect for this with a app that doesn't suck
What is the difference in black or white vinyl paper ?
These would be killer if you made a stand for them
I want to do a smallwr scale version of this in my pc, do they generate much heat?
Very cool 👍😎👍
how do you control these if you dont have a smartphone ????
Merry Christmas "V"🎁⛄
Merry Christmas to you too
What r u doing step V. 5:19
👀🤷♂️
Is it 16ft per tube or 32ft per tube of rgb strip
16 he bought 2
Is there any flickering on higher frame rates? ie 60p / 120p with a shutter speed of 1/125 - 1/250
I don’t believe I saw any flickering at 120 but I will check. 240 there was (on my iPhone)
You shouldn't. It uses a DC adapter, so you don't get that 100% NVF modulation at 120 Hz like you do from direct AC.
Yeah I tried 240 again (forgot to get back to you) and still no flickering. So looks great
I’m trying to get started with the LED tubes while having zero knowledge of LED specs. I’m wanting to use these tubes for sports videos with a decent amount of slow motion 1/250 or even faster shutter speed. What spec/stat should I be looking at when buying LEDs to know if the refresh rate can handle this shutter speed without flicker?
Why sand it if you're wrapping in vinyl? Couldn't you also use wax paper?
I sanded the first one off camera because I planned to paint it but also to diffuse the light a bit more. Wanted to make sure both were the same so I still sanded the second one. Can use wax paper but when I tried it, it bled more light than I wanted. The wrap wasn’t perfect and I’m sure there’s way better ways of doing this. I kinda went in blindly and this is what I came up with 😅
Name of tat transperent pipe look like cylindrical
Pretty sure you could have just run a single 4ft line of LEDs on a flat length of wood instead of wrapping 16ft of them around a dowel.
Yeah you can and it works okay but it’s not 360° which I could have solved with some soldering etc. but I wanted to try it thins way and I needed them to be brighter
Running them along a dowel and making sure the LEDs are offset properly would have worked too. The chips on my strips have rather long traces which makes them difficult to wind around a dowel like this so if I end up doing a project similar to this, I will have to do as Neon Specter suggested.
My strips have 32 LEDs per meter but I know that some LED strips are even more dense. The best solution will highly depend on what kind of strips you have.
i watched this after i build my own with old led tube light
Nice! How did yours turn out? What did you do different?
@@BuildsWithV it's fine but mine is transparent without the wooden rod and the base is cement, i don't have proper tools so i just do it anyway, it almost cost a thing im mean all parts are scraps
🔥🔥🔥
Hey dude i just wanted to ask if you had to guess what is the wattage for the lian li strimer cables as i have a 750w powersupply and the estimated wattage on pc part picker is 518w without the cables so i just wanted to make sure its gonna be safe. also nice vid :)
For the Strimer cables I’m not too sure what they’re estimated at unfortunately. It should be perfectly fine, I have a 750w bronze psu as well and tons of other stuff in my PC without any issues. Upgrading to 850w gold soon to be safe cause I’m putting a 3080 in it, otherwise it’s fine
@@BuildsWithV Ok Thanks :)
Nice :)
Thank you! Cheers!
How many ft u need to wrap all the stick 32?
Each stick will take 16 feet
what was the point of sanding it?
Just so the paint can stick better
if this mans watch was on any tighter his fingers would be more blue then the rgb
I saw a similar video but by just covering a fluorescent light with coloured versions of these tubes.
wax paper will let more brightness come out of the tube
Yeah back then I tried it but I think I just used too many LEDs cause no matter what I tried I couldn’t get the individual LEDs to not be visible. Ended up using this and it worked but kinda dim. Maybe some day I’ll give this another shot.
Hi you live in Toronto ?
Hello, I do not. I live near Cleveland, Ohio. Not too far from Toronto tho
what happend to your QL fans
I put them in another PC. Still figuring out what I wanna do with this Pc as far as Fans and all that good stuff.
@@BuildsWithV ah ok nice
"colors are off..." then they are not the best one are they? next!
rainbow lights lol
no colour at all
????????
Basically......dude try another word. You gave me a headache, thanks 🤕
Take some ibuprofen 🤷♂️
omg i can't watch this brutality for long !! worst tutorial ever 🤣
Are you high or sum fam?
Would be beter to use the frosted vinyl as opposed to white. You're losing a lot of light output having an opaque layer. As well, using an led strip that is 60led/m as opposed to 30
can you make them strobe or react to sound?
Any thoughts on sanding the exterior of the tube vs using vinyl? I wonder how it would compare in brightness to your eyes.
Lol Tbh when you finished wrapping it in vinyl I clapped! not at all an easy feat, well done
I actually tried the sanding method and unfortunately the leds were still very visible through it. I tried various grits as well. I also tried the paint method and that works about as good as vinyl but a bit messy. The vinyl gave it a nice texture and overall the beat look with the matte finish. I did try gloss as well and it looked great but too shiny. Basically just settled on matte vinyl and looks great. Thanks so much 🙏 There’s a few small bubbles in the vinyl but 🤫 don’t tell anyone 😂
@@BuildsWithV i appreciate that reply. Just about to get going on a 1.7ft tube with my 144 3.3ft strip folded back to back and hopefully centered in the tube by suspension. That or cutting down and placing the half strips next to each other and taped to one side of the tube. Wanting to use this as a sconce so not too worried about the back side but more concerned brightness... now i'm kinda wondering if 360 light will give me more illumination then back to back
@@jaceace32 I’m honestly not too sure which way would provide the most like honestly. I wanted 360 degree lighting so I can show off the front to the camera and the back can illuminate the background or whatever it is I’m shooting. Since only about 50% of the leds will be facing the front I’d assume laying them down and facing as many as possible towards the front would provide the brightest lighting.
Great job and great video
Thanks so much 🙏
So basically they aren't bright at all..
bro stop crying go buy some grovee lights💀