How does the green gas work vs. Co2 ? Does it use cartridges ? Sorry, new to airsoft. I purchased this to help practice my Steel Challenge matches with .22LR pistols. This is getting delivered tomorrow. Im excited. Thanks. Great video man.
Green gas works similarly to a refilling a butane lighter if you are familiar with that. You hold the can on top and inject the gas downwards into the magazine. Don't inject it sideways or upwards. Green gas is also a little bit lower pressure than co2 and is affected by temperature. If it is really cold, the Green gas is not going to be happy and you'll have to warm up the magazine by holding it in your hand or pocket or armpit or something.
Seems upgrade of aap01 maybe? how about the hammer? it's not steal right? and how about shooting feeling? also same with aap01? I'm kind of full auto lover. so far it seems very same with aap01
It's using the same system to keep compatibility with upgrade and replacement parts. But it's made by a different manufacturer and is a licensed replica of a real pistol. They also have made a few improvements.
Hi I just bought the Cthulhu gun and I tried to put the hpa mag I set up from my AAP but it doesn’t stay on the Cthulhu so I just used my green gas g series mags
It looks nice but has too many weird parts on the lower like the slidecatch or safety that can't be easily replaced(AAP01 is fully compatible with G18 hammer internals and have tons of aftermarket parts) (I know, stock AAP01 sucks but its one of the best airsoft pistol platforms, fully CTM its a beast)
The aap-01 also has parts that are "weird", the safety bar on a normal aap-01 is not easily replaceable as well as the slidecatch on the normal aap-01. CTM is a garbage company, stay away from them
Thank you for posting such informational videos. It's nice to have another contender in the G18 spectrum. I did however find it difficult to listen to the dialogue in the video once I noticed all the "ums". Saying "um" less while speaking is something I'm improving. I suggest you to consider trying as well, with all due respect, appreciation, and constructive criticism in mind.
![In Depth Look at the Lancer Tactical Cthulhu [A Tandemkross Licensed Replica]](http://i.ytimg.com/vi/Pm8k2q0DqzA/mqdefault.jpg)
If you have any questions, leave them here in the comments section and I will answer them
Hey man love your videos! Trying to grow myself. How’s the hammer looking? Stronger then stock aap?
@StupidAirsoft. I don't have any long term use with this one, but it is different manufacturer from the aap01, so hopefully the hammer holds up.
@@Wyhaq when you get a chance you should try and stick a small magnet to it and see if it’s steel!
where can i buy one?
does it take co2?
Very thorough review guy, thanks a lot!
I tried to make sure I got everything.
Thanks for the breakdown man, looks like a good buy and this convinced me
No rail?
It comes included with a rail. I'm just not using it right now.
@@Wyhaqdo you know where I could get a bottom rail for the Cthulhu since it only comes with a top one?
Hey im sort of nee to building these up, how do I adjust the triggers travel?
Does it take AAP-01 Mags ? Nice video btw
Yes, pretty much any glock style magazine
Yes, Glock style magazines work including extended magazines without any modifications. I have 2 and they fit perfectly
would it be compatible with existing TDC hop units, or would you need drilling and such?
You would need to drill a hole like on the normal aap01. But it would be real easy, it's polymer receiver
Does the lower pictanny rail segment from a AAP 01 fit on this so you can mount a flashlight?
When you were showing the bottom grips how did you take off that tab
the barrel shroud on the real one looks much nicer but still a cool gun. ive been wanting an aap01 for a while but i think ill go with the cthulhu
How does the green gas work vs. Co2 ? Does it use cartridges ?
Sorry, new to airsoft. I purchased this to help practice my Steel Challenge matches with .22LR pistols.
This is getting delivered tomorrow. Im excited.
Thanks. Great video man.
Green gas works similarly to a refilling a butane lighter if you are familiar with that. You hold the can on top and inject the gas downwards into the magazine. Don't inject it sideways or upwards.
Green gas is also a little bit lower pressure than co2 and is affected by temperature. If it is really cold, the Green gas is not going to be happy and you'll have to warm up the magazine by holding it in your hand or pocket or armpit or something.
Would you make a video going over maintenance of this by any chance? Specifically where to apply the lubricant and what not
I have a couple problems with mine first the safety won’t work and also the it’s stuck in full auto even if I flick the switch
does tti glock mag fits?
Quick question can it run doom?
what is with magwells? did aap onces fit on the lower fom the cthulhu?
What holster is this gun compatible with? looks great TBH
What type of rail is that like the exact measurements or is there somewhere I can find it.
Does it have steel internals ?
What bbs does it use??
Seems upgrade of aap01 maybe? how about the hammer? it's not steal right? and how about shooting feeling? also same with aap01? I'm kind of full auto lover. so far it seems very same with aap01
do the cthulu mags work on the aap01? gas efficiency, lockback, all that?
It looks like a rebranded AAP-01
It's using the same system to keep compatibility with upgrade and replacement parts. But it's made by a different manufacturer and is a licensed replica of a real pistol. They also have made a few improvements.
what alan key size do i need for the rear sights
Hi I just bought the Cthulhu gun and I tried to put the hpa mag I set up from my AAP but it doesn’t stay on the Cthulhu so I just used my green gas g series mags
Was it a primary adapter or tapp adapter
The real question is. How much do they want it for?.
It's very reasonable. About 150
@@Wyhaq Now that’s deal!, especially all the specs included.
155 dollars in their web
It’s like 145$
so its an aap-01?
Pretty much
Basically but it comes with a ton of CNC externals that would usually run you an extra $100 essentially
Do you think the Cthulhu will fit with the ctm tax Fuku 2 skeleton upper and handle?
I'm not sure, it probably will. I'm never going to test it though, ctm is a bad company.
It looks nice but has too many weird parts on the lower like the slidecatch or safety that can't be easily replaced(AAP01 is fully compatible with G18 hammer internals and have tons of aftermarket parts) (I know, stock AAP01 sucks but its one of the best airsoft pistol platforms, fully CTM its a beast)
The aap-01 also has parts that are "weird", the safety bar on a normal aap-01 is not easily replaceable as well as the slidecatch on the normal aap-01. CTM is a garbage company, stay away from them
@@Wyhaq What internals do you recomend for AAP? cowcow ones? (im building a second AAP atm :D)
How does the hop up work? If it’s like the WE galaxy I’m out, that system is trash.
This one is the same hopup as the aap-01. Much better than the we galaxy. Easy to adjust and many aftermarket options
Thank you for posting such informational videos. It's nice to have another contender in the G18 spectrum.
I did however find it difficult to listen to the dialogue in the video once I noticed all the "ums". Saying "um" less while speaking is something I'm improving. I suggest you to consider trying as well, with all due respect, appreciation, and constructive criticism in mind.
I am well aware. You have no idea how many umms I cut. This was the minimum ammount of umms without being too choppy. I am working on it
How many time ms did he say umm 😂 great vid tho
Could you use scripted dialogue and edit out the amount of times you say “uhm”?
I have tried to do scripts before. It's worse
Personaly i think its absolutely hideous.
It's a replica of a competition gun
When you were showing the bottom grips how did you take off that tab