Premo vs Sculpey III
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Check out our curated tool kit: www.backtoeart...
Thank you so much for watching! My daily tutorials are sponsored by our Craft Along Club and viewers like you; please like share and subscribe and feel free to follow me on social media:
Facebook: / back-to-earth-creation...
Instagram: / back_to_earth_creations
Please consider joining our Craft Along Club to participate in our exclusive streams, monthly craft crates, digital downloadable content, and behind the scenes updates! www.backtoeart...
amazon wishlist: a.co/84BBWxX
I wish you had tried to break the skulpey 3 after resin. If it still cracked I wouldn't use it to make orders for customers. Love your videos. Your always so happy.
Yvonne.....Thank you for this comparison. I'm very new to polymer clay and am grateful for this information. I already have a little stash of Sculpey III and was slowly starting to get some Premo. This encourages me to play some more and see what happens. My plan is to make cabochons for bead embroidery, but excited to see what all else I can do. Thanks again!!!
I love folded and rollded😂. Was having an off night. In addition to learning, I got a chuckle. Love the videos.
Thanks for the comparisons. I bake my premo pieces for an hour (at the recommended temp) and that makes them nice and strong. :o)
what temp do you bake them in?
@@cocomoreno5907 I bake Premo between 265-275. I use an oven thermometer to make sure the temp is correct.
My dog sneezed at the same time so when she said bless you I was like 😨😱
The Premo has more plasticizers in it so it’s stronger. I’ve seen some clay artists add Premo to the III to make it stronger. Add some translucent to it, very beautiful effects! 😊
Oh and you can cook the clay in an ice bath which some have said will make it stronger.
My experience lines up with yours. I tend to use Sculpey because it's all our Joann's has and I can use coupons to get it cheaper.
Thank you for this video.. Best.. I mq here u friend from Malaysia country ❤🎉🎉🎉🎉🎉
I'm glad you like it! ❤️😊❤️
I said in my "Polymer clay for beginners" that the only place Sculpey III belongs is the trash can. Not only it breaks right after being baked, but it degrades over time and sometimes might crumble by itself . as for the mica shift appearing or not depends on the angle you cut re. to the angle the mica shifted.
Humidity, temperature while working, toaster oven vs stove oven, baking time and temperature as well as clay age are all contributing factors to brittleness as well as manufactured chemistry ...
@@jameswitte5167 Except that manufactured chemistry trumps everything. You can go by the book in all aspects and Sculpey III will still be brittle and breaking no matter what. Also, "clay age" is a non-factor. Polymer clay doesn't age. At least not by measurable factors at this point. I had worked with polymer clay over 2 decades old and some friends had worked with polymer clay over 3 decades old and it was still perfectly workable if conditioned properly.
They are so beautiful! Thanks for thus video, it helped a lot in deciding what kind of clay to buy!
Very true, in my experience fimo is the best and most firm. Sculpey premo is just as good as fimo, just a little softer so In my opinion premo is good for kids and beginners looking for polymer. But I still prefer fimo, and I love to mix fimo and premo together, sculpey III and premo mixes makes it a little more firm but still sticky and falls apart after baking. Thank you for your video!
Right on, this is great info! Thank you!
That was very interesting and very informative thanks for the video
I love those colors. Wow!
I love snap edits! Good work
ParaWire had such nice things to say about you today!!! Grats on the Artist Spotlight!!
Hi Von, you mentioned in the video that you are happy you have the motor (1:30) hooked up to the pasta machine. I'm wondering what motor it would be and where you picked it up. Thanks Von for all you do.
She has a Makins, and they also make a motor for it. Not sure if this link will work: www.amazon.com/Makins-Professional-Ultimate-Machine-Motor/dp/B001687WM4
Thank you so much for the information. I'll check it out!! Have a great day!!!
Resin is very dangerous, you should use it in mask (3m respirator) and gloves...
for animals those vapours are also dangerous
Just saw your spotlight in the ParaWire email. Awesome and way to go! They used a beautiful pic of you as well.
You have a great video voice
What would happen if you would put premo and Sculpey together? Im down with an experiment 👻
Jennifer Quistgaard I use them mixed all the time!! It’s great, strengthens sculpt iii And. FIMO. Strengthens premo😀.. play with the translucent !! That would be fun experiment for von , do all three in a cross test!!
Would it change the baking times?
Im just starting with clay and found your video and this was very interesting :☺☺ So we could say sculpey III is better for details and premo like for the main piece, right :)
I like the applicator tip on the resin ... The resin should stiffen it up fine ... Especially the idea of resin front and back ... Can you use Sculpeu III as a base for Premo ???
yea I live sculpey 3 for my arthritic hands LOL and im like you, sometimes I get those pesky little air bubbles too.
Where can I purchase the cutters? Thank you great tutorial !
Primo is best for sculpting. It takes and holds details. Sculpy III is good for general use in jewelry making when deep detail isn't vital. I cook according to the new information put out by Sculpy - 300 degrees, not 275. I also bake for not less than 45 minutes, regardless of thickness. Tenting with foil keeps lighter colors from becoming dark during the bake. Many of my early projects were to fragile because I followed the 15 minute/1/4 inch rule. Brittle, brittle, brittle. Totally ashamed to even show or offer those items now. I do a lot of Mica Shift for backgrounds.
i'm starting claying with the inltent to make jewelry. either to sell, or give as presents. i had about 20 bars of sculpey 3 given to me. but, because of it's reviews of being brittle, i don't want to use it. how can i salvage all that clay? i got some sculpey mold maker (i want to do molding too). it says it will soften and recondition clays. then i see, mix with another clay, or add vaseline, or oil, or just use transluscent. but then if my beads are thick, is there chances of it not breaking? all this info on yt is overwhelming. ty if you can help me.
Yvonne how do you keep your leaves from curling when you bake them?
So pretty
Sculpy III and premo have different temps for baking the website dies not recomend mixing them, but if it is an experiment and a small bit,You could try?
Thanks for sharing.
How would you take bubbles out?
Can you mix the Sculpy iii and premo?
Can you brush the resin for thinning effect? and can I use oven to hard them or can I just let air dry?
DO NOT PUT RESIN IN THE OVEN!!!
Does anyone know what this UV “oven” is where the resin was cured? I want one 😅
What if you mix them?
Do you think sculpey 3 is worth buying? I was going to buy a sculpey 3 multi pack but saw a really bad review about how easily it breaks. I want to make some glass items without polymer clay mods on the outside. I also saw that quenching your polymer clay pieces can help make them stronger. Have you tried that and noticed that this helps sculpey 3 be less brittle?
What thickness setting, on the pasta machine, did your final draft of the leaves use?
Rewound and watched the video with my hubby. Found (heard) the answer .... thickest setting. 😘
do you have a video on how you put a motor on your pasta machine??? or did you buy it that way??
hi , it's nice and thank you . But I asking about machine , where can found it?
do you know anything about sculpted bake shop? i have never play with clay to know anything about it and i have some of the bake shop that i would like to work with (play) lol I dont even know how to bake it omg Idk anything about this
Just discovered that my bell has been turned off and it won’t turn back on! 😡Thought I’d tell in case others are having this problem.
Pretty..how do u store them if u have extra pieces
I like the marbling colors too
This is fun. Did you know just how much Parawire loves you? Check out my Patreon messages. HUGS
I hate scupey 3