If you're broke don't spend more on frame sliders just fit 54mm skateboard wheels. I'm looking to buy this bike in the new year in the storm fluo colour scheme.
Looks awesome. I'm getting the same exhaust installed next week. I did put in a DNA high flow air filter. And even with that filter alone I noticed much better response in the throttle.
2020 MT owner here, love mine. Just ordered the Brogue kit on mine too, can't wait to take mine out this year and rip through some gears with the Akra TI.
Timsmotorcyclediary. Thanks for the comment! Good point, stainless steel lines would make the braking even better. Way less fluid expansion in the steel lines versus braided.
The handlebar mirrors with bionic headlight looks sick on your bike! I put them on mine as well. Every MTO7 needs handlebar end mirrors in my opinion, very nice build 👌
You need to get a flash for fuel injector cut off. When you turn disable the cut off, the engine is still fed a little fuel when off the throttle so you don’t get the hard engine braking, allows you to coast!
I have ask a few questions about the bar end mirrors.. 1) do they get in the way of throttle, clutching,braking? 2) are they better than stock mirrors and if so,why? 3) if I cannot find these same ones, is there a different pair(s) you would recommend? Thanks for the very informative video. I'm in my mid-late 50's and this is my first motorcycle. I have the same exact one.... ....Ride Safe
1. No they do not get in the way of any of that. 2. They are worse than the stock mirrors. They are smaller. I always check mirrors and physically look. I’m never dependent on them so I’m okay with the size. 3. Pretty much any 7/8 bar end mirror will work or ones that clamp on the existing bar ends. You might need to use a spaced to get it to clamp tight but they’re are hundreds of different options. I got a bunch of videos on this thing now and other mod installation. Wether you mod it or not the bike will be great
Bro I am this fucking guy…. Same bike, akra exhaust, gloss version of his helmet, and the red visor😑💜 except I have an ecu flash! Oh and same mirror, same turn signals, same tail light! Except I have a custom plate tuck! I’m going to make a video of it lol
I don’t have frame sliders yet but I do have spool sliders on the rear axle and they are womet tech from tst industries. I’ll probably be getting my frame sliders from them as well. Thanks for the comment man! Peace ✌️
@@BradTheBuilderChannel FT ECU and 2wdw for the tune. Just plug bike into computer and install the flash. Also it only like 3-4 wires you have to plug into the ECU. Plus down the road you can do a quickshifter upgrade with it.
I have the 2021 XSR 700. Can't find a power commander 5 here in Canada for the 2021 model. They are all 2020 and under. What's the difference? And you're right. I am scared to add up how much it costs for the mods I did so far. But love my bike. Just found you channel. Will be watching. 👍
Robbie I’m not sure on exact differences but what I would recommend is reaching out to them and asking them. They’re customer service is great. Yeah is expensive but what an experience it is to ride man. Thanks for checking out the channel much appreciated. Peace!
Jason, Its not a perfect match but its close enough for people to not notice. I unfortunetly do not have the packaging anymore so im not sure. If i figure it out soon ill let you know.
There is an option. Not sure on the name but it’s around $400 and is more involved. Sending it in is the cheapest route and most allow you to send it back in to get new flashes for free.
@@Avio1717 I know how hard this is to believe but I do not. That's about to change though. I got big stuff in store for future vids. An Instagram account will be made channel specific and I will make a post on youtube when it's all set. I also may be renaming the channel for easier searching both on IG and youtube.
Filosofo, thanks for the comment and visiting the channel. I designed it and 3d printed it out. I might get set up soon to be able to sell them though.
Do you have a file for the windshield yet?! It’s amazing really want to put one on my bike . I would be open to buying the file off you to get one printed for me :)
Bazza thanks for the comment. Thank you very much! I designed the pieces myself so I do have the file. As of now I’m not distributing because it violates the integrity of Yamaha logo if I was to distribute. I’m working on a way to contact them to get permission or a third party to produce it legally. A lot of people like it and I’m working on making it better. You will be the first to know if/when I start to distribute.
I’ve got it installed on my bike. I have a great tutorial on how to install the power commander v to the 2021 model. How to take the plastics off and everything. Also yes and no. The machine will auto adjust but with a full free flowing exhaust it doesn’t adjust quite enough. Prolonged use without a flash tune or power commander which alters fuel delivery, may result in the chance of burnt exhaust valves and premature engine wear. Thanks for visiting the channel.
I guess if you are going to keep the bike for more than five years then spend the money on the exhaust. However if you trade in your bike after 3 years you won't get more money for the mods you have spent your money on..thats why my bike is stock.
Power commander is a piggyback system to the existing equipment and can be removed from the bike returning it to stock. ECU flash is a manual change to the software in the ecu that has more flexibility with adjustments but is much harder to retrun to stock. ECU flashes are harder to troubleshoot in case of an issue. Power commander can be taken off to see if an issue resolves.
On such a good design there is no need for extras. MT 07 logo on front looks blocky or flat and doesnt go with the design language at all. Putting some safety stuff and protection is neccesary
Hi is this exhaust Road legal and does it affect warranty. This is the race option which i like better than the titanium road option. I want to buy one for my 2021 Tracer 7 which i believe is the same fitment. Can you be done by the police for this exhaust or does it affect warranty etc.
Akrapovic states it meets decibel restrictions with the DB killer left in. No cat in this exhaust means it does not meet emission restrictions. If you live in a country that checks emissions regularly chances are you will get in trouble yes. However, in the states, this is a very unlikely scenario. I talked to a state trooper about this very issue and an aftermarket exhaust is the last thing they are worried about. Display your plate, ride responsibly, have the proper lighting on your bike, and be insured. Talked to the dealer and how warranties work is unless the issue is directly traced to the aftermarket part, it is covered under warranty.
Dude is killing it. Even got the freaking mic
Stay tuned. More vids coming at you for mods and updates. Thanks for the comment David!
If you're broke don't spend more on frame sliders just fit 54mm skateboard wheels. I'm looking to buy this bike in the new year in the storm fluo colour scheme.
That’s a good one will have to look into it
@Shailesh yes I've had it for 6 months now. Videos on my channel.
Looks awesome. I'm getting the same exhaust installed next week. I did put in a DNA high flow air filter. And even with that filter alone I noticed much better response in the throttle.
2020 MT owner here, love mine.
Just ordered the Brogue kit on mine too, can't wait to take mine out this year and rip through some gears with the Akra TI.
Heck yeah I’m so excited for this riding season. Many videos to come when the snow melts
The mod I had done that I enjoy the most is steel-braided brake lines. Night and day difference.
Timsmotorcyclediary. Thanks for the comment! Good point, stainless steel lines would make the braking even better. Way less fluid expansion in the steel lines versus braided.
The handlebar mirrors with bionic headlight looks sick on your bike! I put them on mine as well. Every MTO7 needs handlebar end mirrors in my opinion, very nice build 👌
Loved the video! What jacket is that?! Looks sick & matches the bike perfectly!
It’s the alpinestars GP plus R. It’s got the orange accent to match the wheels. Very nice jacket
You need to get a flash for fuel injector cut off. When you turn disable the cut off, the engine is still fed a little fuel when off the throttle so you don’t get the hard engine braking, allows you to coast!
just keep the throttle open slightly if you dont want engine braking? 🤨 the effect is the same - feed the engine more fuel to continue riding
I have ask a few questions about the bar end mirrors..
1) do they get in the way of throttle, clutching,braking?
2) are they better than stock mirrors and if so,why?
3) if I cannot find these same ones, is there a different pair(s) you would recommend?
Thanks for the very informative video. I'm in my mid-late 50's and this is my first motorcycle. I have the same exact one....
....Ride Safe
1. No they do not get in the way of any of that.
2. They are worse than the stock mirrors. They are smaller. I always check mirrors and physically look. I’m never dependent on them so I’m okay with the size.
3. Pretty much any 7/8 bar end mirror will work or ones that clamp on the existing bar ends. You might need to use a spaced to get it to clamp tight but they’re are hundreds of different options.
I got a bunch of videos on this thing now and other mod installation. Wether you mod it or not the bike will be great
I'm trynna be this guy, even got a second job to see it through. Wish me luck.
Bro I am this fucking guy…. Same bike, akra exhaust, gloss version of his helmet, and the red visor😑💜 except I have an ecu flash! Oh and same mirror, same turn signals, same tail light! Except I have a custom plate tuck! I’m going to make a video of it lol
@@TypicalMT then there will be three of us in maybe a year or less. 🚲🚀
@@joshwolden2929 hell yeah twinning cubed!
Don't buy a new MT07 get it used and save your money, i bought my MT07 for 5 grand with 5800k miles on it ,
@@boris2997 money might not be an issue to that gentleman! Let him do as he pleases🤷🏽♂️
looks mint , btw do you have sliders ? , if not what do you have in mind ?
I don’t have frame sliders yet but I do have spool sliders on the rear axle and they are womet tech from tst industries. I’ll probably be getting my frame sliders from them as well. Thanks for the comment man! Peace ✌️
just got a 2022 waiting on the title and while i wait i cant stop buying parts hahah
Buen video 👍
One of the flashing kits for this bike is so much more worth it than a power commander imo
Which company did you use?
@@BradTheBuilderChannel FT ECU and 2wdw for the tune. Just plug bike into computer and install the flash. Also it only like 3-4 wires you have to plug into the ECU. Plus down the road you can do a quickshifter upgrade with it.
@@milodudeful thanks for the info! I might try that at some point too.
@@BradTheBuilderChannel Also has something with a bigger O2 sensor that'll auto tune the bike
Can I buy a rear brake reservoir bracket from you? Would love to remove the passenger pegs but can’t the way that reservoir mounts. Thanks!
I have the 2021 XSR 700. Can't find a power commander 5 here in Canada for the 2021 model. They are all 2020 and under. What's the difference? And you're right. I am scared to add up how much it costs for the mods I did so far. But love my bike. Just found you channel. Will be watching. 👍
Robbie I’m not sure on exact differences but what I would recommend is reaching out to them and asking them. They’re customer service is great. Yeah is expensive but what an experience it is to ride man. Thanks for checking out the channel much appreciated. Peace!
Looks sweet. Haven't used cricut before, what vinyl/color did you buy to match the bike color? Can you please post a link. Thx!
Jason, Its not a perfect match but its close enough for people to not notice. I unfortunetly do not have the packaging anymore so im not sure. If i figure it out soon ill let you know.
Where is the STG file for the MT Logo on the front windscreen?
I designed and own the file. I have not yet made it public. Thanks for visiting the channel
My nephew has a 3D printer. I’d love to have the file for that “windscreen”
is there a way to flash the stock ecu at home?
There is an option. Not sure on the name but it’s around $400 and is more involved. Sending it in is the cheapest route and most allow you to send it back in to get new flashes for free.
I know it's an old Vid, but the link to bar end mirrors doesn't work. Anyone got a link for the same style please? They look awesome. Nice bike.
where did you buy the blue wheels and tank stickers?
I made them with a cricket vinyl printer. Since it's the Yamaha name I am not able to distribute them either. I really wish I could for you guys.
@@BradTheBuilderChannel do you have ig?
@@Avio1717 I know how hard this is to believe but I do not. That's about to change though. I got big stuff in store for future vids. An Instagram account will be made channel specific and I will make a post on youtube when it's all set. I also may be renaming the channel for easier searching both on IG and youtube.
can you tell please where you got that windshield from??
Filosofo, thanks for the comment and visiting the channel. I designed it and 3d printed it out. I might get set up soon to be able to sell them though.
if you use your kick stand like that and ride in the rain it will rust away
Do you have a file for the windshield yet?! It’s amazing really want to put one on my bike . I would be open to buying the file off you to get one printed for me :)
Bazza thanks for the comment. Thank you very much! I designed the pieces myself so I do have the file. As of now I’m not distributing because it violates the integrity of Yamaha logo if I was to distribute. I’m working on a way to contact them to get permission or a third party to produce it legally. A lot of people like it and I’m working on making it better. You will be the first to know if/when I start to distribute.
Where i can buy the Mt07 3D symbol?? Love it🔥
hello have you mounted Dynojet Power Commander 5 or do not need
I’ve got it installed on my bike. I have a great tutorial on how to install the power commander v to the 2021 model. How to take the plastics off and everything. Also yes and no. The machine will auto adjust but with a full free flowing exhaust it doesn’t adjust quite enough. Prolonged use without a flash tune or power commander which alters fuel delivery, may result in the chance of burnt exhaust valves and premature engine wear. Thanks for visiting the channel.
What size did you do Yamaha stickers
Never use the kickstand like that regularly. That'll damage the kickstand.
so Beautifull motorbike. I love Motorbike my friend
What about airbox mods filter ect..
beautiful
what is your height
I guess if you are going to keep the bike for more than five years then spend the money on the exhaust. However if you trade in your bike after 3 years you won't get more money for the mods you have spent your money on..thats why my bike is stock.
Any idea what the difference is between a power commander and just getting the ECU flashed?
Power commander is a piggyback system to the existing equipment and can be removed from the bike returning it to stock. ECU flash is a manual change to the software in the ecu that has more flexibility with adjustments but is much harder to retrun to stock. ECU flashes are harder to troubleshoot in case of an issue. Power commander can be taken off to see if an issue resolves.
Stop the music when you talk!
Where You geht the Yamaha Stickers ?
Thanks for visiting the channel Max. The stickers I made with a cricket and vinyl.
@@BradTheBuilderChannel ok
On such a good design there is no need for extras. MT 07 logo on front looks blocky or flat and doesnt go with the design language at all. Putting some safety stuff and protection is neccesary
You do you I’ll do me
@@BradTheBuilderChannel I am just saying. No hard feelings
@@DominikV235 all good 👍
You should’ve just get a ECU flash instead of the power commander. Nice bike bro
ECU flash is not out for the 2021 model just yet :D
Hi is this exhaust Road legal and does it affect warranty. This is the race option which i like better than the titanium road option. I want to buy one for my 2021 Tracer 7 which i believe is the same fitment. Can you be done by the police for this exhaust or does it affect warranty etc.
Akrapovic states it meets decibel restrictions with the DB killer left in. No cat in this exhaust means it does not meet emission restrictions. If you live in a country that checks emissions regularly chances are you will get in trouble yes. However, in the states, this is a very unlikely scenario. I talked to a state trooper about this very issue and an aftermarket exhaust is the last thing they are worried about. Display your plate, ride responsibly, have the proper lighting on your bike, and be insured. Talked to the dealer and how warranties work is unless the issue is directly traced to the aftermarket part, it is covered under warranty.
@@BradTheBuilderChannel thanks buddy. Sounds awesome. I live in the UK. Will speak to my local dealer. 👍👍
You paid $8399 out the door? So the motorcycle was $6500?
ha $6500 I wish $8399 is with taxes, dealer fees, and license included. Buy used!! 2021s used will be hard to find currently howeverr
Just buy an MT-09 instead of throwing $ at a beginner bike.🤷🏻♂️