I'm having a nightmare of a time trying to find a way to run a hose from my motorcycle crankcase to a catch can/breather. The barbed fitting is a single barb on the crank case and is vary close to the exhaust would need a bend to keep it away from the heat as I keep blowing through hoses do to melting. On top of that the OD of the crank case fitting is 16.80mm on a micrometer or I call it 17mm even and the OD on the fitting for the canister is 8mm I cant find any way to step a hose down from 17mm ID to 8mm ID. Any help would be much appreciated as I basically just shove the smaller hose down the bigger one and call it a day since I burn through them so often.
![เป็นไปได้ไหม - WanMai [Performance Video]](http://i.ytimg.com/vi/Eh5hItD4Mr0/mqdefault.jpg)
Can 801 hose be used with gasoline
And can it be used with Jegs push loc hose fittings
I'm having a nightmare of a time trying to find a way to run a hose from my motorcycle crankcase to a catch can/breather.
The barbed fitting is a single barb on the crank case and is vary close to the exhaust would need a bend to keep it away from the heat as I keep blowing through hoses do to melting.
On top of that the OD of the crank case fitting is 16.80mm on a micrometer or I call it 17mm even and the OD on the fitting for the canister is 8mm I cant find any way to step a hose down from 17mm ID to 8mm ID.
Any help would be much appreciated as I basically just shove the smaller hose down the bigger one and call it a day since I burn through them so often.
Thanks for posting ill be calling to order some, im wanna add a aux cooler on my dodge 2500.
How do you remove them?
sharp knife.