Creality Falcon2 Pro - FULLY ENCLOSED Laser Cutter and Engraver
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Get your own Falcon2 Pro Here: fpfdesigns.com...
Use code "FNPALL10" for 15% off
USB-C Right Angle Cable: amzn.to/3xPkrJF
USB over Network Cable Adapter: amzn.to/3W5da2x
fpfdesigns.com/
/ @falconlaserofficial
• 3D Printed Fume Extrac...
• 3D Printed DRO Mount f...
• 3D Printed Drawer Orga...
• 3D Printed TPU Gasket ...
Outro music is "Quantum" by "Vapora", used with explicit permission from the artist. • Quantum
New videos published every Friday, featuring a new 3D printed functional object, how I use it, and design considerations.
Any designs depicted in this video is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License or other non-commercial license.
store.creality...
22W：FALP22W 40W：FALP40W
creality
falcon
review
enclosed
safe
gaskets
cork
thick wood
FDA
compliant
dxf
lightburn
air assist
USB extender
ethernet
fpf
functional
print
friday
Ive just ordered mine based on this video, Thank you for great content
The health risk is the adhesive resins used in plywood veneers! Ah a video that drives a Functional Print yes yes ;)
The 40w version has a "precision" button that turns off half of the diodes, so there wouldn't be any need to purchase a separate laser unit and swap them out.
Interesting! I wasn't aware of that. I wonder why they include the 1.6w with the 40w then. .
@@FunctionalPrintFridaymaybe I misheard what you said on the video, but I assumed you were just talking about needing to swap between 22W and 40W if you bought the 40W. 1.6W would be what, one diode? If you needed that, you'd need it whether you got the 22W or the 40W right?
The 1w laser is for very fine detail engraving, which will give you finer results than the 40w with half the diodes enabled. (Obviously depends on what you're trying to do)
I think your camera calibration is a bit off. If you look at the video in the lightburn docs for camera calibration, it fully corrects for the fisheye effect and the edges appear straight after calibration.
Thought so do, but went through it 3 times and got really high "scores" from lightburn during the calibration. Couldn't quite get rid of it at the edges.
gotta stay with wecreat, its alittle bit cheaper
Vvorp Vvrorp spotted
lol
i see many advertise things not actually work xD but who believe advertise. it will cut 30mm. wait its advertise maybe more passes lol
25:55 calibration not perfect or it was diff thick. make sense? even perfect calibration it make sense it not correct, but its correct on bottom face of part. if that how it was calibrated. pretty sure calibration not perfect and not warp camera. lazy people xD
Create a rack and pinion bar to put over the slats to hold them steady.
Mines in the post. should arrive this coming week. Quite excited
Hi again, FPF. I just received my right angle USB-C plug from Amazon, which seemed like a very good suggestion, and am also considering ordering the junction box (2) you're recommending. However, I am currently hung up on a problem of receiving an annoying error message and I cannot seem to find a solution. I'm wondering if the addition of the J-box will add to the problem or perhaps help to make it go away.
I've experienced just the first taste of my operational unit, but have not had any success in conquering aforementioned roadblock problem, so I've not been able to move forward because of that, but also becz of trying to complete my main task of rebuilding my customer's Citabria wing set.
BTW, my error message is "There was a problem sending data to the laser. System may be busy or paused”.
Any possible insight or comment?
NICE set of metal lathe tools, btw. I've inherited my Dad's smaller Smithy Granite and enjoy (mostly) teaching myself about its use.
Cheers!
thx! I have not seen that problem, but the j-box is definitely not going to solve it. If after a power cycle it's not resolved, try another USB port on your PC. If that doesn't resolve it, I'd contact Creality for help.
Many of the DJI top tech guys, founded Bambu and appear to be raising the 3d printer bar above all others. (Similar to what DJI did in the drone market).
Will be interesting to see if a similar leader emerges in the Laser Cutting/Engraving/CNC space.
BTW, I understand Bambu's P1S or X1C are FDM printers (hot glue guns) that support PT, PLA, ABS and carbon fiber material.. but what kind of materials are used in the higher-resolution SLS/SLA (resin+uv) printers? Which is better for automotive applications where strength and heat resistance is needed.
As an absolute newbie to this realm, I enjoyed the video, although I'm really in need of the entire missing portion of how to interact from start to finish with the computer interface. That's where my biggest challenge is as I try to progress with my 40W setup.
I'm getting bits and pieces of what's involved, but I need to buy the book titled Creality Computer Interface for Dummies which would very completely describe every little detail between the step of (1) Setting Up Your Falcon and (3) Actually Pressing the Go Button.
Nice review! What kind of cut speeds were you able get on 1/4" wood?
FLM - Functional Lasercut Monday ?
Is there any way to "cut" 35um copper on printed circuit boards... If not directly maybe with blackening or something? This would be game changing for my area of interest.
at 22w, I don't think it's practical, but there are higher wattage diode machines on the horizon. More to come :)
After learning Klipper and it's web interface(and building a voron eventually), it's disappointing that a machine like this doesn't at least have wifi and a decent web interface. Needing multiple USB connections is inconvenient.
Thanks for the review!
I thought the same thing at first, but then I think it wouldn't work with Lightburn. I think Lightburn is very limited with ethernet compatability.
I know this isn't about the video but I'm always struck how much you and @Attoparsec sound very similar to each other. Until I saw what you looked like I was harbouring real suspicions you were the same person. 😂
nope, but just checked out his channel and sub'd, thx!
He looks like a younger more handsome Nicolas Cage ♥
Just ordered mine, does it come with lightburn or do I have to buy it ?
Have to buy it separate. I think they figure anyone upgrading from another laser will already have it and don't want to jack up the cost for everyone to include it.
Great video, I purchased the 40w unit, I was wondering does this come with a free version of Light Burn or do you have to pay for it?
Not included. I'm still on the free trial, but I'll be getting it. It's a once and done license (not a subscription), which is nice at least.
@@FunctionalPrintFriday If it is designed to only work with light burn then it should come with it, especially for that price!
Great video I’m buying one
come back and let us know how you like it. I really think they killed it with the design/enclosure
Would this etch anything on metal?
On stainless, yes. For other metals, you'd need to use the laser marking spray.
I love your voice❤❤❤
thx
Just ordered mine this morning and this video made me very happy with my purchase!
did you get it yet? What do you think? I don't use mine as often as my 3d printers, but it never misses a beat. When I need it, it just works.
@@FunctionalPrintFriday yes! Came Tuesday. My thoughts th-cam.com/video/w4WDy_V8hig/w-d-xo.htmlfeature=shared