I burn out approximately 12 hours if the tube is large. If the tube is small 6 hours. The size of the tube adjusts the item you want to cast. Approximately 1 cm from the item
Thank you. If I understood correctly, in the previous comment, you wrote that it takes 20 minutes, for burn out proces for this ring from video, or it takes just to get wax out?
approx 20 minutes for 1 inch tube size if the tube is bigger the time will be longer the heat should be gradual the first 5 minutes 50 - 100 c The important thing is that the tube temperature is above 500 degrees Celsius
Terimakasih ilmunya sangat bermanfaat 👍👍
Cantik mas. Terbaik 😊😊😊😊
Can you tell me the approximate duration of burn out proces? And approximate size of plaster? Thanks
I burn out approximately 12 hours if the tube is large. If the tube is small 6 hours. The size of the tube adjusts the item you want to cast. Approximately 1 cm from the item
Thank you. If I understood correctly, in the previous comment, you wrote that it takes 20 minutes, for burn out proces for this ring from video, or it takes just to get wax out?
untuk vakum daya hisapnya berapa?
57 L / m
Vacum cmpresor brp pk bang..?
1/4 hp bos. . .
Yang putih cairan apa bang..?
Itu plaster atau gip seperti semen
Bisa pakai JPL atau ORO plaster
@@JNDjewelers thnk bang🙏
how long it take you to burn out the wax from the tube? Thanks!
approx 20 minutes for 1 inch tube size if the tube is bigger the time will be longer the heat should be gradual the first 5 minutes 50 - 100 c The important thing is that the tube temperature is above 500 degrees Celsius
Thank
What is the solution name? Why solution was bubbling?
JPL (jewelry plaster limited)
Why bubling ? because I use a vacuum chamber to remove the air in the tube
Bubbling solution in cap not plaster .?
Used for cleaning the ring
@@dzmecanic5157 in cup and plaster to
@@dzmecanic5157 H2o2 and potasium