We have a samsung and have replaced the heating element twice in a month then found some sensors that aren’t all on the element were bad so we replaced them. We snaked the dryer vents out with a tool like you have and our drill , got a ton out. Well the dryer worked great for 3 days and back to not heating up. Guess we will have to buy a new one because it’s not the element or sensors we found. At a loss now
I followed the video perfectly and all went well. Just one thing strange, ohm test checked good on all the prongs on the old heating element after removal and the coil though mostly black was not broken, I did find the plate cracked exactly in the same place as the one in the video. So I went ahead and changed everything that came with the kit, including the Thermal Fuse and the Thermostat. After I thoroughly cleaned the interior I could get to of the dryer, and thoroughly cleaned the lint vent all the way to the roof I reinstalled the complete unit. After installation everything worked perfectly, dryer is heating well as new again. Why it stopped heating when ohm check checked good is still a mystery unless the crack in the plate holding the coils was a factor.
Just want to say THANK YOU! I'm a mom and when my dryer went out I was ready to cryyy (we had our vent cleaned so I knew that wasn't the issue). I found your video and thought okay, this is crazy but I'm going to do it. I DID IT!!!!! I haven't been this proud of myself since childbirth 🤣🤣🤣
Girl power 💪yessss! I know that feeling as I was in the same situation with my washing machine drain pump. It went out and I wanted to cry, but I successfully fixed the pump and have been on fire fixing things ever since. I was a little bit nervous about the dryer as I have only changed the cord and nothing more, but after reading your comment and with the help of this video I have all the confidence in the world that I will be able to accomplish this task. Thanks so much 🙏
Absolutely THE BEST How-To video I've ever seen! I'm a 56-year-old woman, and just finished replacing the heating element on my dryer! If you're not a teacher, Jeff, you missed your calling...Thank you!!!!
I am 61 and would not attempt this but I appreciate the information about the annual cleaning of the vent, the link to the brush, and the information about proper venting. That alone was worthwhile. I know someone who did have a dryer fire.
Thank you so much for your time and effort. You,ve just save me from a big bill. Great video, i followed you step by step, all was clear. Under $40, and less than 2 hours I fixed my Samsung dryer. First time I fixed an appliance by my self. Great thanks.
You sir, have allowed me to fix my dryer within twenty-four hours, and clean out my wall vent like a champ. Didn’t cost but $30 for the entire heating element unit and $18 for the vent brush. You’re a saint and a life-saver; the folks at my local Samsung wanted to charge me $100 just to come out. God knows what they’d charge after parts and the time it took them.
@@daviddenison2097 you can get a replacement on amazon, just look for the parts number on the coil heating metal plate. it's around $25+ depending on shipping
Yay! I did it! I replaced the heating element in my Samsung dryer after suffering for 6 months having to hang clothes outside everyday. Thank you so much! Your video was so clear and precise and I followed it, step by step. I also bought the Klein tools meter you recommended to make sure the other parts weren't failing. I'm over joyed and feeling so accomplished. If this woman can do it, anyone can do it! Just follow Jeff's video and you can't go wrong.
@@juanch2031 My Samsung dryer Model # DV393ETPARA/A1. I purchased the heating element on Amazon from the Brand: DOK Parts Best. I don't know the direct link to it. I also purchased the Klein tools meter recommended in this video. I wanted to check before assembling everything back together. The meter will help you with other projects, too. Seven months later, the dryer is working well. To avoid any mistakes in re-assembly, I took pictures of every part or wire I disconnected. I referred back to the pictures and video with every step. This is by far the best step-by-step video I have seen for this. Thank you Jeff.
Heads up, if you just unscrew the "bottom bracket" that you refer to at 9:26, you don't have to use your "stubby little Phillips" to blind unscrew the bottom bracket. You can keep the bottom bracket in the dryer and remove the heating element's housing. Great video, this was extremely helpful!
I tried this but I couldn't do it on this model without removing the bracket. Is it physically impossible? Seemed like it to me, but maybe a professional could. I agree with his decision to show the process of removing the stand, but definitely good to know you can if you're experienced.
I've never stumbled upon a do it yourself repair video that actually made sense and felt like I could do it, thank you! I was able to fix my dryer myself and felt confident that it was done right. Thank you!
Thank you so much! We noticed our dryer wasn’t heating on Friday morning. I found your video and ordered the part within minutes. It arrived the next day and we were easily able to get it swapped out. No stress, no hassle, no having to wait for someone to come out. Thank you so much!
Thank you, Jeff . Husband and I did it together and it was more of fun , with no frustration at all. Thought we would end up yelling on each other and would mess up somewhere along the way. You were so patient with all your details. Just amazing.Thank you/
great video, no fluff, no auditioning, no bs...just pure info....i couldn't wait to add my comment so doing it while the dryer is still open on the floor, but I know that I am going to save the money for a brand new dryer or an expensive service call by following this video.
My husband and I just replaced the heating element in our dryer. We are beyond grateful for your expertise and willingness to share. The instructions were step by step, detailed, and clear. Thank you.
This video was extremely helpful! Thank you for the detailed step-by-step! My husband watched, re-watched, and paused along the way to a successful ending and a dryer that now works! Because of your easy-to-follow steps, we were able to work as a team and we both learned something new! Thank you for taking the time to make such a helpful guide!
We could not have done this without the help of this video. My husband and I are 70 years old and have always been very resourceful, but this was truly a job that was beyond our skill set. However, with your help we now have a working Samsung dryer that was purchased under 4 years ago. We remodeled in 2017 and purchased 4 brand new appliances. Of them, 3 have had issues and we still do not have the ice maker in our fridge repaired. We will never buy a Samsung appliance again. Thank you so much for putting this video online. The hardest part was loosening the screws and wiring clips. Lol! You are a gem!
I’ve been watching DIY TH-cam videos for 3 years and this is the first one I’ve commented on. That was the best fix it vid I’ve seen. Everything was exactly what I dealt with and I went right thru. I got it all fixed up super fast. Thank you very much!👍👍
Just sending a “high five” to you Jeff for a most comprehensive video that enabled us to disassemble, replace the element (which by the way had the element broken and the metal housing cracked in exactly the same place as the one you showed in the video), clean and reassemble very easily. Great step by step detail with clear camera shots! Thanks!!
In my case the resistance broke exactly on the same spot, with the frame cracked on the same spot, except that there was no obstruction in the exhaust duct that could cause overheating; we clean it regularly. Well, it's been in use for 7 years, so this might be just regular wear. I agree that it must have been designed with that weak spot built in.
Add another to the list that was broken exactly the same way and fixed by simply following your video. Let me just echo everything that Karen and so many others have said! Superb!
Dryer stopped heating, searched and came across this video. Saved us HUNDREDS of dollars. Amazing detail showing how to take the part out, and how to put it back in. Ordered off Amazon witht the part number in the description, and it arrived the next day. Put it in, following this video, and we are back to wearing dry clothes. Cannot thank you enough.
Very helpful! I had trouble fitting the repaired heater enclosure into the round hole at the back after replacing and re-assembling. Kept falling out as I positioned the bracket underneath. Was made easier by attaching the bottom bracket back to the heater enclosure (after sliding the enclosure back into the dryer and reattaching wires) with the single screw on the tab of the enclosure, then positioning everything, and then securing the bracket at the bottom with the screws. Also, the heater enclosure has a tab that has to slide into a slot in the bracket, at least on mine. That threw me for a bit - again easier to attach them back together first, then position and complete the final re-install.
This video really helped me with the same Samsung dryer. Maybe you should make a video on what dryer to buy that doesn't require so much work like this Samsung.
100% the best how to video I have ever watched on you tube my daughter and I just finished this repair and we now have a functioning dryer again and I only spent 25$ for the part. Thank you sir, your video was plain, clear and easy to watch without a lot of BS that some people wanna throw in!
First class TH-cam University how to video ! I cook booked it the whole way and got perfect results the first try. Excellent tutorial Jeff, much appreciated. We subscribed to your channel and look forward to our next project. BTW, there’s an air leak on the shuttle, we’re throwing your contact info their way.
My forever tip I've got as an becoming engineer back in 1976, during studies was, that I always have to think about the one who works on any engine/machine with the screwdriver! I NEVER forgot about that! Had to smile about your brand related comments! But you find these genius everywhere..! Free translation from German wording: "Yesterday I did not know how to spell engineer, today I am one (of these)!"
Excellent video! Your advice was right on. The walkthrough had just enough detail but didn't get bogged down in banter. You described and linked exactly what was necessary for the job. Nice freaking vid! Just saved me a bunch. I think these heating elements are just low quality. My dryer is 4 years old, the vent is only a few feet long and was essentially clear and I clean the lint filter after every load. The plate was cracked on mine too, just like the one you showed. Anyway, thanks!
Glad it helped! On my old Whirlopool DUET dryer, they failed every 2-3 years. Probably don't last any longer unless you clean out all your ducts up tot he roof at least once per year. I get lazy and wait until my wife complains the dryer is not drying the clothes anymore, meaning heat exhaust is not exhausting out, so dryer overheats.
Super helpful video that goes into great detail. My model was slightly different, but the information he gave was a great step by step demo to troubleshoot the issue, and opening up the whole machine. The detail he showed in testing the existing heating element to show the closed and open circuits was great. Found the broken heating element and was able to replace. Greatly appreciated!
This is one of the best DIY videos I have seen! Great detail, you cover basic maintenance and the importance behind it. You rock! Thank you for taking the time to record this.
Hey Jeff! I just replaced the first heating element in my Samsung Dryer about a year and a half ago. The first element lasted about 8 1/2 years. You have to take several parts off to get to the element, but the procedure is very strait forward, as you show in your video. I also cleaned the vent pipe and now it is time for me to do it again. I only have about 6 feet of vent pipe to clean. I also replaced the lint screen at the time because it was torn and allowed bigger chunks of lint to get through. Thanks, Russ
Also one of the many who is beyond grateful for your expertise! This has saved me a bunch! Extremely informative, detailed, and easy to follow! Thank you, Thank you, THANK YOU!
Thanks for making such a detailed, well made video. I appreciate all the little details and reminders you included. It shows your experience, and certainly gives us laymen more confidence to try a repair like this. Keep up the good work.
Absolutely the BEST video I found. You eliminated unecessary steps and saved me hundreds of dollars for a repairman. Keep the great videos coming. Thank you so much.
This worked perfectly! My husband and I just finished repairing the dryer and what a joy it was to turn it on and get heat! We used the link you provided to purchase the heating element gathered up all the tools required and set to work. By far the most difficult part was getting the screws out of the back part of the heating element then putting them back in...more awkward than difficult. You saved us a hefty repair bill as quotes ranged from $220.00 ca to over $300.00 ca. Thanks Jeff!
Following the video, this is perfect, just one point is missing! Add some band-aid to the workplace. All parts are sharp like a Swiss Army knife. Other than that, my wife's one is fixed, so I can use it again! Cheers y'all!
Usually we see a code on the Samsung models (most not all depending if the temp sensor is driven by a circuit board: tS, t5, tC, tO, t0, tE, tE3, tC5, tCS, 1 tC, 1tC5, 1tCS, Extra Low light is blinking. * some units have a fault code that wont allow the dryer to start until the filter or vent is cleared. One has to ask are you getting no heat, low heat at high heat setting, just lo heat etc.- might not be the heating element coil. This is why we use diagnostic steps, basic electronic science and read a wiring schematic. VS most DIYERS and novices * even professionals shoot the parts cannon at the problem see what sticks (which is NOT diagnostic/critical thinking). HINT most wire schematics for dryers are taped behind or behind and inside the top control module (BONUS HINT on refrigerators there taped Behind the front grill, in the center or on the left side. Other common locations are on the left or right side by the condenser, or inside the refrigerator section inside the control panel)). Most show you the error code faults and most show you how to read the faults from there you can TEST the circuits, sensors, heating coils following the wire schematic to determine exact problem. If you cant test it you haven't found the problem. * like Jeff shows. Electric dryers are very simple machines (most are electron hogs) vs gas vs line clothes outside. IF I could recommend any purchase advise to consumers- STAY AWAY from all the sensor gadget features on a dryer (or washer or any appliance) you only need about 4-5 temp settings with todays clothes the rest of the crap manufactures throw on there is just plan nonsense i.e. sanitation settings. Dryer manufacturers use sanitation standards put forth by the National Science Foundation adding more settings and upselling is just marketing BS. Sure manufactures are thinking about a VIRUS sanitation setting.
I worked on a bunch of these and almost evertime the issue ended up being in the board after replacing the element and the thing sky rockets up over 500 degrees when you start it 😳
Thank you for the video tutorial! My Samsung dryer had no problem for over 17 years; I've had GE, Maytag, Speed Queen before and never lasted 2 years. All I do is just regular vent cleaning and my Samsung dryer runs like a new one every year and every time. Cheers!!
This video along with the recommendations saved me from wasting money on buying a new dryer. Every penny counts and spending the money on this kit helped save me money for another project. Thank you!
A lot of time people blame their dryer. Mine was my fault because I did not vacuum out the vent ducts leading up to the roof, so it clogged, and super hot moist air remains in the dryer instead of blowing out the roof.
Same. I replaced mine after 4 years of use. The new one from Amazon lasted 1 year. Fixing it again tomorrow. I take out the drum though. Easy to do and makes it so much easier.
Watch the video once and ordered the part from the link. I was able to install like a pro. No problems. My element look just like yours. It was broken in the same place and had the same crack in the metal plate. We have had our dryer for 6 years and this was the first problem. Thank you for the video!
What sets this video apart from others is the importance of checking electrical continuity of various components involved, not just the heating element. This way you can diagnose the actual problem. Last year I replaced the heating element using this video. This year the heating element has no problem, but the thermal fuse is the culprit. Thanks a lot!
Thanks for the video, my dryer stopped heating so I opened up the dryer and checked the heating element with the Ohm meter and yes, no continuity. I ordered the part and swapped it out. So easy thanks to you.
This video may be 3yrs old… BUT it has blessed me a mother/teacher to fix my dryer and save a great deal of money. Thank you sir for the very informative DIY video!
Repair techs were telling me $150 to $500 but we can't tell you an exact price until we come out which will cost $100 😫 Just repaired the dryer myself for about $30! You're out here doing the Lord's work 😆👍🏽 Thanks!!!
I truly wonder how many people you’ve gotten out of this situation through your video. Thank you for the detailed look and info! Mine had overheated and cracked without any lint in the machine or exhaust.
Truth be told there is to many people trying to do this DIY videos. I think most do it for money or whatever. I want to say that this guy "first video" does way better at explaining everything to do a really job!!! Probably the best I've ever watched. He gives information that can save lives as well. Thank you sir, I think I'll follow your efforts in life. Great job, I will be watching move of what you do and I'm sure learning somethings most overlooked. Dryer fires should never be overlooked!!!
Thank you very much for your help me to save my samsungdryer. My samsungdryer was not working and I do not know what happened. I just watch your video and following your instruction. I did it today and my samsungdryer is working excellent now. Thank you again and I wish you in good health.
Sir, I sincerely cannot thank you enough for this video. I was able to pinpoint the issue, disassemble, replace the heating element (crack in the spring and frame, just like you said there would be), and re-assemble in less than a few hours total time (same day in fact as Amazon sent me the replacement part same day). Thank you so much and please keep putting out content like this!! Who would have thought for less than $30 I could fix my Samsung dryer!?!? You saved me hundreds of dollars!!
This happened at my parents house, so naturally they started shopping for a new dryer! I went there and took a look, sure enough I saw the dryer duct was completely clogged with lint, about 5 years worth. I kid you not, I filled up over half a garbage bag worth of lint. After that, used this video and a few others to replace the heating element and viola! Not only is the dryer working, it’s drying the clothes much quicker than ever before. Thank you!
Thank you for this video. You actually saved us from possibly having a house fire by giving the tips about the lint build up. Your video was so good and detailed I didn’t have any issues replacing the heating coil. Thanks again
Thank you for this video. I purchased the entire unit instead of replacing just the heating element. I was able to take apart and replace it and put it back together with in two hours. Your video so SUPER helpful. Thank you.
Thank you so much for sharing this. I paid $17 and bought the heating element, followed your video to the letter and now my dryer is working better than before. You literally saved me hundreds of dollars.
Jeff, thanks so much for the detailed service video. Was able to get it done the first time around with very little hiccup. My model is a Samsung number DV350AER XAA03. Only differences were the tabs on the front panel were a bit different and not as cumbersome to line up. And the major difference (which was a relief) is that the bracket holding the heater element casing didn’t halve the screws on the back that required the reach behind with the stubby screw driver. The bracket now just has the 2 screws in the front, and slots that the bracket slide into on the base of the machine. Dryer now working like a charm. I have a home warranty that would’ve covered it. But it’s an $85 service fee and a wait time for a service tech. The part cost me only $28 on Amazon and was delivered within 8 hours. Took me only a couple hours of work time in between smoking a brisket outside. Much thanks brother!
Thanks so much for this detailed video! Even though I was looking for an excuse to get rid of the Samsung appliances that came with the house, figured I could try to fix it first to at least finish my laundry. But omg, the lint dust! I vacuumed out the vent in the wall first with my shopvac and it clogged for a sec with the chunks that came out! Glad I watched this video and saved myself a fire. My parents never owned a house, so I had no idea that it was a thing to be aware of. The only thing I wished the video had addressed was how tricky the metal wire connecter tab things connected to the shell of the heating element could be. I figured it out eventually! Thanks again!
Jeff, thanks for this video. Very clear and concise directions. This video helped me a year ago with my in-laws' dryer and now I was able to reference it again for my own.
Definitely the best you tube to change your element. Down to the “tee”. I would advise anyone to watch this if your Samsung dryer is not drying. You the man.
Jeff, Thank you! Best fix-it video I've ever seen and the only one I've commented on. I purchased my heater element via Amazon which was $22. I overnighted it and it cost $38. Every detail of the job is outlined - even how to pull apart the connections which I usually lose patience with and ruin, get angry, cause more repairs and then spend more money. Great video that anyone can follow. I also took apart my vent hose and blew my power blower through it and cleared out the whole line. Agree with the one comment though, you will need some band aids!
Thanks for the video! Thermal fuse went,and it was indeed my own fault. Completely cleaned out the piping all the way to the outside + dryer itself and replaced the thermal fuse and good to go.
Thank you for saving me $$. My warranty just expired two months ago and I was able to repair it myself within three days which is how long it took for the part to arrive from Amazon. Thank you for showing the heating element part number. Made it much easier for me to order.
Thank you so much!! We have not cleaned our exterior vent since we purchased three years ago. Again thank you for your detailed and informative tutorial, I'm glad we didn't have a fire before we knew about the regular maintenance. ❤
I have a slightly newer model Samsung, but this video still helped me out perfectly. I ordered a new part and was able to replace it with minimal issue and my dryer heats again. I will say, one thing to consider is wearing some kind of work gloves. The sheet metal on the inside of the dryer can be very sharp, and if you are a bit clumsy like me, you may get a few cuts from it. Nothing major though! Thank you for making videos like this, saved me from having to buy another dryer.
A HUGE thank you for this! It saved me $300. I also wanted to add I was able to remove those pesky back screws with a socket wrench and phillips attachment.
Jeff!!!! Dude!!! That video was spot on accurate. I watched it twice, took notes the second time so i had a batter idea of what to expect. I vacuumed everything out and took a picture like you suggested of the wires. My model was slightly different than yours. There were three screws along the top front panel. Mainly the Heater element bracket only had two screws in front and had two bent rear tabs down thru the bottom panel. You tip it up and pull out forward to remove that bracket. 'Twas a much better design than the two blind screws. The coil leads were OPEN. The thermistor and thermostat measured correctly. The coil was open on the underside in the same area as yours. Now I will order the replacement and reassemble. I am confident it will be fine afterwards. Thank you again for your awesome video. God bless!!!
THANK YOU!!!!! You made replacing the heating element SO EASY. I got it repaired in about 2 hours, and that includes picking up the part. GOOD NEWS: I have a newer Samsung Steam Dryer and the metal platform that the element casing sits on does not have that back screw!! It has 2 slots that you just slide the back side into! Easy peasy!
Great video. Couldn't have done this with any degree of confidence without it. The heating element looked almost exactly like the one you pulled out in this video, though not as black. What was even better than the video was the link to purchase just the coil and sensors. I was about to drop over $100 on the entire assembly, but the coil itself with sensors was only $30. Thank you so so much!
Thanks to your video I was able to fix my dryer and do some proper maintenance without spending a ton of money! Thank you so much for this PERFECT video!!
The heating element was a hero, and protected the thermal switch! Which is more expensive?? Those guys are not engineers. Engineers, by definition, make things better. Manufactured goods seem to be getting worse in multiple ways this century. That's the problem with our world today, too many designers and not enough engineers! Excellent video!!!
Just completed this fix on my D42H5000. It took me about 2 hours but I'm the least handy person ever. Thank you Jeff, money is real tight for me these days and your video gave me the confidence to try to tackle this myself. With the money I saved I'll be able to afford several more months of the medicines I need. Your content is a literal livesaver. I can't thank you enough.
Best Video ever to fix the problem. Followed it excatly and fixed my dryer issue. It was the heater core. It blew apart about where you showered yours. Got the part from Amazon. $30 and I replaced all the thermostat and core all together. This video really helped me thanks. In a hour or so it's working line new.
@jeffostroff I have had this dryer right at 4 years. It stopped making heat. I youtube the problem. Saw your video and tearing it apart. Sure enough it was the heater core
A big thank you to you sir. I have a similar Samsung dryer which wasn't exactly the same model as this, but was able to test all of the electrical components with the help of this video and determined that the heating element was bad. Ordered a new one, installed it, and it's working well 😎
Maaan! This video helped me fix my dryer! You are a great teacher! After watching your video I feel more confident in fixing other things around my house. You rock sir!!
Thank you so much for patiently providing us step by step instructions on how to fix the dryer heating problem. Your steps were so easy to understand and I was able to fix my dryer, without having to go out and buy a new one.
Thank you for this video! Was able to fix my Samsung dryer in 1 1/2 hours following your video and all for a $30 part. Really appreciate your thoroughness!
Hello! I just wanted to say thank you so much for your video and your patience in explaining it. My dryer wasn’t drying! So I googled and your video came up and I watched and then I said let me see if I can do it on my own and guess what I fixed it thanks to you!!! I feel so proud of myself!! My issue was the thermal fuse not the heating element, I only spent $15 bucks 😁 thank you and keep up the great work!!
Thank you! The whole family has been down with the 'rona for the last few days and the dryer stopped heating. In addition to being sick we have a special-needs kid which means that laundry never stops in our house. Wife was stressing. Can't exactly ask someone to do a service call with a house full of contagious folks. I'm fairly handy but wouldn't have figured out how to approach this repair without your video. Despite being sore all over and semi-feverish I was able to get this thing back up and running in about 24hr, including getting the parts from Amazon. My model (DV210AEW) had a slight difference in the mounting bracket. Instead of two screws in the back, it's two tabs in slots in the bottom of the unit. I was excited at first because I thought I got off easy. Nope. Finally figured out that I had to tilt the dryer up a bit to pry those tabs loose from underneath. I think you're supposed to be able to rock the bracket out but there wasn't enough clearance. I tend to hold mechanical engineers in high esteem, but I must say they could have designed this unit to be a lot simpler to repair. Thanks again.
Awesome video 👏. I had done this fix once before but just used a little vacuum tool to clean the vent. I bought the kit this time and pulled 3 Plastic shopping bags full out of our vent exhaust. Also, your step by step was perfect. The stubby screwdriver was a must. Thanks for making it easier for me to get it done more quickly this time!
Thank you!!! My 10+ year old dryer still followed this video. behind all the fancy new tech, I guess the behind the scenes technology has remained the same. A cheap part off amazon and it’s back up and running!
💲 Samsung Dryer Heating Element DC47-00019A Kit w/Thermostat: amzn.to/2TEJ4kp
💲 Dryer Exhaust Telescopic Periscope Kit Whirlpool 8171587RP: amzn.to/38utZay
💲 Fluke 87-V Digital Multimeter: amzn.to/2LK8etM
💲 Klein Tools MM400 Multimeter, Auto Ranging: amzn.to/38uwucS
💲 Milwaukee, 2415-20, Cordless RA Drill, 12V, 3/8 in. amzn.to/3czTbj9
💲 Milwaukee 2415-21 M12 12V 3/8" Right Angle Drill/Driver Kit amzn.to/38qhm0m
wanted to let you know Pro Appreciation week is coming - March 23
Any good deals you know about?
I haven't had time to look.
We have a samsung and have replaced the heating element twice in a month then found some sensors that aren’t all on the element were bad so we replaced them. We snaked the dryer vents out with a tool like you have and our drill , got a ton out. Well the dryer worked great for 3 days and back to not heating up. Guess we will have to buy a new one because it’s not the element or sensors we found. At a loss now
I followed the video perfectly and all went well. Just one thing strange, ohm test checked good on all the prongs on the old heating element after removal and the coil though mostly black was not broken, I did find the plate cracked exactly in the same place as the one in the video. So I went ahead and changed everything that came with the kit, including the Thermal Fuse and the Thermostat. After I thoroughly cleaned the interior I could get to of the dryer, and thoroughly cleaned the lint vent all the way to the roof I reinstalled the complete unit. After installation everything worked perfectly, dryer is heating well as new again. Why it stopped heating when ohm check checked good is still a mystery unless the crack in the plate holding the coils was a factor.
Just want to say THANK YOU! I'm a mom and when my dryer went out I was ready to cryyy (we had our vent cleaned so I knew that wasn't the issue). I found your video and thought okay, this is crazy but I'm going to do it. I DID IT!!!!! I haven't been this proud of myself since childbirth 🤣🤣🤣
You are so welcome!
I have the same feeling cause I did it awesome video
Lol the end
Ima father and I feel how u feel 😂😂
Girl power 💪yessss!
I know that feeling as I was in the same situation with my washing machine drain pump. It went out and I wanted to cry, but I successfully fixed the pump and have been on fire fixing things ever since. I was a little bit nervous about the dryer as I have only changed the cord and nothing more, but after reading your comment and with the help of this video I have all the confidence in the world that I will be able to accomplish this task. Thanks so much 🙏
Absolutely THE BEST How-To video I've ever seen! I'm a 56-year-old woman, and just finished replacing the heating element on my dryer! If you're not a teacher, Jeff, you missed your calling...Thank you!!!!
Thanks Ann, glad you liked it and Glad it helped!
I just can't thank you enough! I'm a 56 year old little lady and I repaired my dryer for $23! Your video was perfect!
Awesome, glad to hear you were bale to fix this yourself!
56 year old Honey Bear...
I am 61 and would not attempt this but I appreciate the information about the annual cleaning of the vent, the link to the brush, and the information about proper venting. That alone was worthwhile. I know someone who did have a dryer fire.
Thank you so much for your time and effort.
You,ve just save me from a big bill.
Great video, i followed you step by step, all was clear. Under $40, and less than 2 hours I fixed my Samsung dryer.
First time I fixed an appliance by my self.
Great thanks.
You sir, have allowed me to fix my dryer within twenty-four hours, and clean out my wall vent like a champ. Didn’t cost but $30 for the entire heating element unit and $18 for the vent brush. You’re a saint and a life-saver; the folks at my local Samsung wanted to charge me $100 just to come out. God knows what they’d charge after parts and the time it took them.
Thanks, I'm glad you liked it!
Honest person will charge $200 , dishonest $500
Where did you find parts???
@@daviddenison2097 you can get a replacement on amazon, just look for the parts number on the coil heating metal plate. it's around $25+ depending on shipping
@@jerkel Hi love one. U R right except the one I saw is $245. Is there knock off brands I missed?
Yay! I did it! I replaced the heating element in my Samsung dryer after suffering for 6 months having to hang clothes outside everyday. Thank you so much! Your video was so clear and precise and I followed it, step by step. I also bought the Klein tools meter you recommended to make sure the other parts weren't failing. I'm over joyed and feeling so accomplished. If this woman can do it, anyone can do it! Just follow Jeff's video and you can't go wrong.
Awesome Yolanda, congratulations on getting that done yourself.
What is your model dryer. How you order thanks
@@juanch2031 My Samsung dryer Model # DV393ETPARA/A1. I purchased the heating element on Amazon from the Brand: DOK Parts Best. I don't know the direct link to it. I also purchased the Klein tools meter recommended in this video. I wanted to check before assembling everything back together. The meter will help you with other projects, too. Seven months later, the dryer is working well. To avoid any mistakes in re-assembly, I took pictures of every part or wire I disconnected. I referred back to the pictures and video with every step. This is by far the best step-by-step video I have seen for this. Thank you Jeff.
I'm about to try this. I'm a grandmother. But I think I can do it, Yolanda! It is worth a try. :)
Yolanda, is your dryer not generating heat at all? or there is still little heat generated before you fix it
Heads up, if you just unscrew the "bottom bracket" that you refer to at 9:26, you don't have to use your "stubby little Phillips" to blind unscrew the bottom bracket. You can keep the bottom bracket in the dryer and remove the heating element's housing.
Great video, this was extremely helpful!
That's fine you can get the heater loose but there's no way to get the heater out with that stand in place.
I tried this but I couldn't do it on this model without removing the bracket. Is it physically impossible? Seemed like it to me, but maybe a professional could. I agree with his decision to show the process of removing the stand, but definitely good to know you can if you're experienced.
I've never stumbled upon a do it yourself repair video that actually made sense and felt like I could do it, thank you! I was able to fix my dryer myself and felt confident that it was done right. Thank you!
Glad it helped
Thank you so much! We noticed our dryer wasn’t heating on Friday morning. I found your video and ordered the part within minutes. It arrived the next day and we were easily able to get it swapped out. No stress, no hassle, no having to wait for someone to come out. Thank you so much!
Glad it helped Kristen, and thank you so much for the $4.99 $SuperThanks!
Thank you, Jeff . Husband and I did it together and it was more of fun , with no frustration at all. Thought we would end up yelling on each other and would mess up somewhere along the way. You were so patient with all your details. Just amazing.Thank you/
great video, no fluff, no auditioning, no bs...just pure info....i couldn't wait to add my comment so doing it while the dryer is still open on the floor, but I know that I am going to save the money for a brand new dryer or an expensive service call by following this video.
Glad it was helpful!
My husband and I just replaced the heating element in our dryer. We are beyond grateful for your expertise and willingness to share. The instructions were step by step, detailed, and clear. Thank you.
That is awesome!
This video was extremely helpful! Thank you for the detailed step-by-step! My husband watched, re-watched, and paused along the way to a successful ending and a dryer that now works! Because of your easy-to-follow steps, we were able to work as a team and we both learned something new! Thank you for taking the time to make such a helpful guide!
Amy, is your dryer not generate heat at all? or there is still little heat generated before you fix it
We could not have done this without the help of this video. My husband and I are 70 years old and have always been very resourceful, but this was truly a job that was beyond our skill set. However, with your help we now have a working Samsung dryer that was purchased under 4 years ago. We remodeled in 2017 and purchased 4 brand new appliances. Of them, 3 have had issues and we still do not have the ice maker in our fridge repaired. We will never buy a Samsung appliance again. Thank you so much for putting this video online. The hardest part was loosening the screws and wiring clips. Lol! You are a gem!
Glad to help, and congrats on fixing that yourself!
I have a Kenmore dryer, which is made by Samsung and this tutorial was amazingly helpful😊. Thank you so much, you saved me a ton of money !
I’ve been watching DIY TH-cam videos for 3 years and this is the first one I’ve commented on. That was the best fix it vid I’ve seen. Everything was exactly what I dealt with and I went right thru. I got it all fixed up super fast. Thank you very much!👍👍
Glad it helped Kevin!
You are a great teacher. Thanks to you, no cuts on my hands, & no curse words. My dryer is FIXED.
Glad to help Mike!
Just sending a “high five” to you Jeff for a most comprehensive video that enabled us to disassemble, replace the element (which by the way had the element broken and the metal housing cracked in exactly the same place as the one you showed in the video), clean and reassemble very easily. Great step by step detail with clear camera shots! Thanks!!
Yes! Helped another one! Thanks for watching Karen!
Probably engineered to break.......buy, buy, buy.
In my case the resistance broke exactly on the same spot, with the frame cracked on the same spot, except that there was no obstruction in the exhaust duct that could cause overheating; we clean it regularly. Well, it's been in use for 7 years, so this might be just regular wear. I agree that it must have been designed with that weak spot built in.
@@jeffostroff Just repaired mine thanks to your video and it was also broken in the exact same spot. Thanks for the amazing video!!!
Add another to the list that was broken exactly the same way and fixed by simply following your video. Let me just echo everything that Karen and so many others have said! Superb!
Dryer stopped heating, searched and came across this video. Saved us HUNDREDS of dollars. Amazing detail showing how to take the part out, and how to put it back in. Ordered off Amazon witht the part number in the description, and it arrived the next day. Put it in, following this video, and we are back to wearing dry clothes. Cannot thank you enough.
Sir;
I now feel confident enough to attempt to repair my dryer. The amount of detail that you put into this video really made a difference.
Thank you.
Awesome glad to help
Very helpful! I had trouble fitting the repaired heater enclosure into the round hole at the back after replacing and re-assembling. Kept falling out as I positioned the bracket underneath. Was made easier by attaching the bottom bracket back to the heater enclosure (after sliding the enclosure back into the dryer and reattaching wires) with the single screw on the tab of the enclosure, then positioning everything, and then securing the bracket at the bottom with the screws. Also, the heater enclosure has a tab that has to slide into a slot in the bracket, at least on mine. That threw me for a bit - again easier to attach them back together first, then position and complete the final re-install.
This video really helped me with the same Samsung dryer. Maybe you should make a video on what dryer to buy that doesn't require so much work like this Samsung.
They all do. My old Whirlpool DUET same thing.
Best darn DIY vid I have seen in my 54 years! Thanks Jeff!
Wow, thanks!
A MILLION THANK YOUS !!! Today I got to fix my dryer and my mom couldn’t be any more happier !!! Thank you so much !!!!!!!!!
Glad to help Lorenzio and thanks for watching.
100% the best how to video I have ever watched on you tube my daughter and I just finished this repair and we now have a functioning dryer again and I only spent 25$ for the part. Thank you sir, your video was plain, clear and easy to watch without a lot of BS that some people wanna throw in!
First class TH-cam University how to video ! I cook booked it the whole way and got perfect results the first try. Excellent tutorial Jeff, much appreciated. We subscribed to your channel and look forward to our next project. BTW, there’s an air leak on the shuttle, we’re throwing your contact info their way.
I'd love for NASA to call me!
My forever tip I've got as an becoming engineer back in 1976, during studies was, that I always have to think about the one who works on any engine/machine with the screwdriver! I NEVER forgot about that! Had to smile about your brand related comments! But you find these genius everywhere..! Free translation from German wording: "Yesterday I did not know how to spell engineer, today I am one (of these)!"
Maybe these machines were not designed by engineers, but rather some people from marketing left over after the engineering team was laid off.
@@jeffostroff Good answer!
I think they make it as hard as they can to encourage the use of servicepeople. There'd be almost no need for them if everything was easy to fix!
Excellent video! Your advice was right on. The walkthrough had just enough detail but didn't get bogged down in banter. You described and linked exactly what was necessary for the job. Nice freaking vid! Just saved me a bunch. I think these heating elements are just low quality. My dryer is 4 years old, the vent is only a few feet long and was essentially clear and I clean the lint filter after every load. The plate was cracked on mine too, just like the one you showed. Anyway, thanks!
Glad it helped! On my old Whirlopool DUET dryer, they failed every 2-3 years. Probably don't last any longer unless you clean out all your ducts up tot he roof at least once per year. I get lazy and wait until my wife complains the dryer is not drying the clothes anymore, meaning heat exhaust is not exhausting out, so dryer overheats.
In less than 24 hours, this video helped me take apart my dryer, find the problem and fix it. 10/10 good sir. I owe you more than my views!
THANK YOU!!!! I was able to fix my dryer MYSELF!!! Never have fixed any appliance before! My teenage boys now know they have a FIX IT Mom!! LOL
Super helpful video that goes into great detail. My model was slightly different, but the information he gave was a great step by step demo to troubleshoot the issue, and opening up the whole machine. The detail he showed in testing the existing heating element to show the closed and open circuits was great. Found the broken heating element and was able to replace. Greatly appreciated!
Great to hear Gavin!
This is one of the best DIY videos I have seen! Great detail, you cover basic maintenance and the importance behind it. You rock! Thank you for taking the time to record this.
Wow, thank you!
Hey Jeff! I just replaced the first heating element in my Samsung Dryer about a year and a half ago. The first element lasted about 8 1/2 years. You have to take several parts off to get to the element, but the procedure is very strait forward, as you show in your video. I also cleaned the vent pipe and now it is time for me to do it again. I only have about 6 feet of vent pipe to clean. I also replaced the lint screen at the time because it was torn and allowed bigger chunks of lint to get through. Thanks, Russ
Yes, keeping those pipes clean is the key to a long and healthy heating element lifespan.
After searching on multiple channels, your comments, safety tips and filming were on point, thanks a bunch, best of kind.
Awesome, thank you!
Also one of the many who is beyond grateful for your expertise! This has saved me a bunch! Extremely informative, detailed, and easy to follow! Thank you, Thank you, THANK YOU!
This was just perfect. Showed exactly what I needed to do an exactly which part was the issue. Thank you
You're welcome! Jay!
Thanks Jeff. I was about to call Samsung service and do an expensive repair before watching your video. Could complete the repair under $25.
Holy cow, I'm getting 3 to 5 people day telling me the same thing, there must be a boatload of these Samsungs failing out there.
@@jeffostroff these things suck .. i know 2 ppl with the same issue.
Thanks for making such a detailed, well made video. I appreciate all the little details and reminders you included. It shows your experience, and certainly gives us laymen more confidence to try a repair like this. Keep up the good work.
Glad it was helpful! thanks for watching Steven!
Absolutely the BEST video I found. You eliminated unecessary steps and saved me hundreds of dollars for a repairman. Keep the great videos coming. Thank you so much.
You're welcome Jim!
This worked perfectly! My husband and I just finished repairing the dryer and what a joy it was to turn it on and get heat! We used the link you provided to purchase the heating element gathered up all the tools required and set to work. By far the most difficult part was getting the screws out of the back part of the heating element then putting them back in...more awkward than difficult. You saved us a hefty repair bill as quotes ranged from $220.00 ca to over $300.00 ca. Thanks Jeff!
Way to go Glad it worked!
Following the video, this is perfect, just one point is missing! Add some band-aid to the workplace. All parts are sharp like a Swiss Army knife. Other than that, my wife's one is fixed, so I can use it again! Cheers y'all!
Awesome, glad to help Patrik!
I second that! Got a few cuts myself throughout this repair
Yes! You will definitely be cut lol...thx for the video!
Usually we see a code on the Samsung models (most not all depending if the temp sensor is driven by a circuit board: tS, t5, tC, tO, t0, tE, tE3, tC5, tCS, 1 tC, 1tC5, 1tCS, Extra Low light is blinking. * some units have a fault code that wont allow the dryer to start until the filter or vent is cleared.
One has to ask are you getting no heat, low heat at high heat setting, just lo heat etc.- might not be the heating element coil. This is why we use diagnostic steps, basic electronic science and read a wiring schematic. VS most DIYERS and novices * even professionals shoot the parts cannon at the problem see what sticks (which is NOT diagnostic/critical thinking). HINT most wire schematics for dryers are taped behind or behind and inside the top control module (BONUS HINT on refrigerators there taped Behind the front grill, in the center or on the left side. Other common locations are on the left or right side by the condenser, or inside the refrigerator section inside the control panel)). Most show you the error code faults and most show you how to read the faults from there you can TEST the circuits, sensors, heating coils following the wire schematic to determine exact problem. If you cant test it you haven't found the problem. * like Jeff shows.
Electric dryers are very simple machines (most are electron hogs) vs gas vs line clothes outside.
IF I could recommend any purchase advise to consumers- STAY AWAY from all the sensor gadget features on a dryer (or washer or any appliance) you only need about 4-5 temp settings with todays clothes the rest of the crap manufactures throw on there is just plan nonsense i.e. sanitation settings. Dryer manufacturers use sanitation standards put forth by the National Science Foundation adding more settings and upselling is just marketing BS. Sure manufactures are thinking about a VIRUS sanitation setting.
The washer is smart and talks the app, but surprising the dryer does not, and no error codes appeared either which was surprising.
when should you see the error codes? upon start up? paused? is there a trick to get them to display?
@@garymccall9573 start up there should be a code display. Whats going on with your dryer?
@@proanswers it starts and runs but doesn't heat up. No codes on start up.
Very helpful. I was able to TS the issue and found the heating element to be “open”. Thanks!
Great to hear! Did you replace it and get it working again?
jeffostroff part is coming in from Amazon sometime today.
@@jeffostroff 0Ip
@@jeffostroff w57
I worked on a bunch of these and almost evertime the issue ended up being in the board after replacing the element and the thing sky rockets up over 500 degrees when you start it 😳
Thank you for the video tutorial! My Samsung dryer had no problem for over 17 years; I've had GE, Maytag, Speed Queen before and never lasted 2 years. All I do is just regular vent cleaning and my Samsung dryer runs like a new one every year and every time. Cheers!!
Great to hear!
This video along with the recommendations saved me from wasting money on buying a new dryer. Every penny counts and spending the money on this kit helped save me money for another project. Thank you!
Not all heroes wear capes... that's all I have to say. Thank you 1000x
Thanks Nicholas!
Perfect! Saved me tons of time man
Glad it helped!
Looks like I’ll be replacing mine again it was just replaced last year. Samsung needs to do something about this.
A lot of time people blame their dryer. Mine was my fault because I did not vacuum out the vent ducts leading up to the roof, so it clogged, and super hot moist air remains in the dryer instead of blowing out the roof.
Same. I replaced mine after 4 years of use. The new one from Amazon lasted 1 year. Fixing it again tomorrow. I take out the drum though. Easy to do and makes it so much easier.
Watch the video once and ordered the part from the link. I was able to install like a pro. No problems. My element look just like yours. It was broken in the same place and had the same crack in the metal plate. We have had our dryer for 6 years and this was the first problem. Thank you for the video!
Awesome Roy!
Thank you for this video! I felt like a pro, saved money, and didn't have to air dry my clothes for weeks or months while waiting for an actual pro.
What sets this video apart from others is the importance of checking electrical continuity of various components involved, not just the heating element. This way you can diagnose the actual problem. Last year I replaced the heating element using this video. This year the heating element has no problem, but the thermal fuse is the culprit. Thanks a lot!
The cheap heating element is probably the problem that I’d blowing out the fuse.
Thanks for the video, my dryer stopped heating so I opened up the dryer and checked the heating element with the Ohm meter and yes, no continuity. I ordered the part and swapped it out. So easy thanks to you.
Glad it helped Rene!
This video may be 3yrs old… BUT it has blessed me a mother/teacher to fix my dryer and save a great deal of money. Thank you sir for the very informative DIY video!
I did it!!! Thank you so much for your step by step instruction. My first small appliance repair! Another mom, very grateful and proud of myself!
Repair techs were telling me $150 to $500 but we can't tell you an exact price until we come out which will cost $100 😫 Just repaired the dryer myself for about $30! You're out here doing the Lord's work 😆👍🏽 Thanks!!!
I truly wonder how many people you’ve gotten out of this situation through your video. Thank you for the detailed look and info! Mine had overheated and cracked without any lint in the machine or exhaust.
I get about 5 people every day who comment how this video helped them, glad I uploaded it
Truth be told there is to many people trying to do this DIY videos. I think most do it for money or whatever. I want to say that this guy "first video" does way better at explaining everything to do a really job!!! Probably the best I've ever watched. He gives information that can save lives as well. Thank you sir, I think I'll follow your efforts in life. Great job, I will be watching move of what you do and I'm sure learning somethings most overlooked. Dryer fires should never be overlooked!!!
Thank you very much for your help me to save my samsungdryer. My samsungdryer was not working and I do not know what happened. I just watch your video and following your instruction. I did it today and my samsungdryer is working excellent now. Thank you again and I wish you in good health.
Sir, I sincerely cannot thank you enough for this video. I was able to pinpoint the issue, disassemble, replace the heating element (crack in the spring and frame, just like you said there would be), and re-assemble in less than a few hours total time (same day in fact as Amazon sent me the replacement part same day). Thank you so much and please keep putting out content like this!! Who would have thought for less than $30 I could fix my Samsung dryer!?!? You saved me hundreds of dollars!!
Glad it helped
This happened at my parents house, so naturally they started shopping for a new dryer! I went there and took a look, sure enough I saw the dryer duct was completely clogged with lint, about 5 years worth. I kid you not, I filled up over half a garbage bag worth of lint. After that, used this video and a few others to replace the heating element and viola! Not only is the dryer working, it’s drying the clothes much quicker than ever before.
Thank you!
Thank you for this video. You actually saved us from possibly having a house fire by giving the tips about the lint build up. Your video was so good and detailed I didn’t have any issues replacing the heating coil. Thanks again
Thank you for this video. I purchased the entire unit instead of replacing just the heating element. I was able to take apart and replace it and put it back together with in two hours. Your video so SUPER helpful. Thank you.
Great job James!
Thank you so much for sharing this. I paid $17 and bought the heating element, followed your video to the letter and now my dryer is working better than before. You literally saved me hundreds of dollars.
Glad it helped! Cha ching!
Jeff, thanks so much for the detailed service video. Was able to get it done the first time around with very little hiccup. My model is a Samsung number DV350AER XAA03.
Only differences were the tabs on the front panel were a bit different and not as cumbersome to line up. And the major difference (which was a relief) is that the bracket holding the heater element casing didn’t halve the screws on the back that required the reach behind with the stubby screw driver. The bracket now just has the 2 screws in the front, and slots that the bracket slide into on the base of the machine.
Dryer now working like a charm. I have a home warranty that would’ve covered it. But it’s an $85 service fee and a wait time for a service tech. The part cost me only $28 on Amazon and was delivered within 8 hours. Took me only a couple hours of work time in between smoking a brisket outside.
Much thanks brother!
Thank thank thank you!!! None of the other videos showed this exact model! I really appreciate you making this video! It was so easy to fix!
Glad I could help Debbie
Thanks so much for this detailed video! Even though I was looking for an excuse to get rid of the Samsung appliances that came with the house, figured I could try to fix it first to at least finish my laundry.
But omg, the lint dust! I vacuumed out the vent in the wall first with my shopvac and it clogged for a sec with the chunks that came out! Glad I watched this video and saved myself a fire. My parents never owned a house, so I had no idea that it was a thing to be aware of.
The only thing I wished the video had addressed was how tricky the metal wire connecter tab things connected to the shell of the heating element could be. I figured it out eventually!
Thanks again!
Jeff, thanks for this video. Very clear and concise directions. This video helped me a year ago with my in-laws' dryer and now I was able to reference it again for my own.
I'm so glad the video was helpful to you not once, but twice!
Definitely the best you tube to change your element. Down to the “tee”. I would advise anyone to watch this if your Samsung dryer is not drying. You the man.
Thanks so much Jerry!
Jeff, Thank you! Best fix-it video I've ever seen and the only one I've commented on. I purchased my heater element via Amazon which was $22. I overnighted it and it cost $38. Every detail of the job is outlined - even how to pull apart the connections which I usually lose patience with and ruin, get angry, cause more repairs and then spend more money. Great video that anyone can follow. I also took apart my vent hose and blew my power blower through it and cleared out the whole line. Agree with the one comment though, you will need some band aids!
Awesome Kenneth, glad you were able to make this repair!
Did this with my husband now we feel like we can conquer the world. Thank you so much!!! Saved us lots of money
Thanks for the video! Thermal fuse went,and it was indeed my own fault. Completely cleaned out the piping all the way to the outside + dryer itself and replaced the thermal fuse and good to go.
Thank you for saving me $$. My warranty just expired two months ago and I was able to repair it myself within three days which is how long it took for the part to arrive from Amazon. Thank you for showing the heating element part number. Made it much easier for me to order.
Great to hear!
Thank you, sir! We followed right along with this video and were successful! $35 for parts and a little elbow grease and it is fixed.
Way to go Erin!
Thank you so much!! We have not cleaned our exterior vent since we purchased three years ago. Again thank you for your detailed and informative tutorial, I'm glad we didn't have a fire before we knew about the regular maintenance. ❤
I have a slightly newer model Samsung, but this video still helped me out perfectly. I ordered a new part and was able to replace it with minimal issue and my dryer heats again. I will say, one thing to consider is wearing some kind of work gloves. The sheet metal on the inside of the dryer can be very sharp, and if you are a bit clumsy like me, you may get a few cuts from it. Nothing major though! Thank you for making videos like this, saved me from having to buy another dryer.
A HUGE thank you for this! It saved me $300. I also wanted to add I was able to remove those pesky back screws with a socket wrench and phillips attachment.
Jeff!!!! Dude!!! That video was spot on accurate. I watched it twice, took notes the second time so i had a batter idea of what to expect. I vacuumed everything out and took a picture like you suggested of the wires. My model was slightly different than yours. There were three screws along the top front panel. Mainly the Heater element bracket only had two screws in front and had two bent rear tabs down thru the bottom panel. You tip it up and pull out forward to remove that bracket. 'Twas a much better design than the two blind screws. The coil leads were OPEN. The thermistor and thermostat measured correctly. The coil was open on the underside in the same area as yours. Now I will order the replacement and reassemble. I am confident it will be fine afterwards. Thank you again for your awesome video. God bless!!!
Glad it worked William
THANK YOU!!!!! You made replacing the heating element SO EASY. I got it repaired in about 2 hours, and that includes picking up the part. GOOD NEWS: I have a newer Samsung Steam Dryer and the metal platform that the element casing sits on does not have that back screw!! It has 2 slots that you just slide the back side into! Easy peasy!
Great video. Couldn't have done this with any degree of confidence without it. The heating element looked almost exactly like the one you pulled out in this video, though not as black. What was even better than the video was the link to purchase just the coil and sensors. I was about to drop over $100 on the entire assembly, but the coil itself with sensors was only $30. Thank you so so much!
Glad to help Brad, and yes that kit is a lifesaver of savings
Thanks to your video I was able to fix my dryer and do some proper maintenance without spending a ton of money! Thank you so much for this PERFECT video!!
Thanks so much for your #4.99 $superThanks!
The heating element was a hero, and protected the thermal switch! Which is more expensive??
Those guys are not engineers. Engineers, by definition, make things better. Manufactured goods seem to be getting worse in multiple ways this century. That's the problem with our world today, too many designers and not enough engineers!
Excellent video!!!
Luckily, price is low, about $25 for the heating element with the $5 thermistor and $5 thermostat parts
Just completed this fix on my D42H5000. It took me about 2 hours but I'm the least handy person ever. Thank you Jeff, money is real tight for me these days and your video gave me the confidence to try to tackle this myself. With the money I saved I'll be able to afford several more months of the medicines I need. Your content is a literal livesaver. I can't thank you enough.
Thanks, I'm glad you liked it!
Great video. All the instructions and everything worked perfectly, and fix my dryer with less than an hour and a half of work.
That is awesome Gary glad to hear it worked for you
Best Video ever to fix the problem. Followed it excatly and fixed my dryer issue. It was the heater core. It blew apart about where you showered yours. Got the part from Amazon. $30 and I replaced all the thermostat and core all together. This video really helped me thanks. In a hour or so it's working line new.
Yup, I just had to do this dryer again last month, the heater core this time had only lasted 1 1/2 years
@jeffostroff I have had this dryer right at 4 years. It stopped making heat. I youtube the problem. Saw your video and tearing it apart. Sure enough it was the heater core
A big thank you to you sir. I have a similar Samsung dryer which wasn't exactly the same model as this, but was able to test all of the electrical components with the help of this video and determined that the heating element was bad. Ordered a new one, installed it, and it's working well 😎
Glad I could help David!
Maaan! This video helped me fix my dryer! You are a great teacher! After watching your video I feel more confident in fixing other things around my house. You rock sir!!
Great to hear!
Thank you so much for patiently providing us step by step instructions on how to fix the dryer heating problem.
Your steps were so easy to understand and I was able to fix my dryer, without having to go out and buy a new one.
Great to hear Rosshan!
Thank you so much! I was able to repair my 10-year old dryer for 40$! Very informative video and I am immensely grateful for your expertise.
Awesome Raphael
Your guide and link to the parts needed saved me hundreds on a new dryer! Thank you so very much!
Glad it helped!
Thanks a million. I saved my heater by following each of the steps you described. It's now heating pretty well. Even a woman could do it. 😉
Glad it helped Chantal!
Thank you for this video! Was able to fix my Samsung dryer in 1 1/2 hours following your video and all for a $30 part. Really appreciate your thoroughness!
Way to go Alexander glad to hear you were successful and thanks for watching my video
Hello! I just wanted to say thank you so much for your video and your patience in explaining it. My dryer wasn’t drying! So I googled and your video came up and I watched and then I said let me see if I can do it on my own and guess what I fixed it thanks to you!!! I feel so proud of myself!! My issue was the thermal fuse not the heating element, I only spent $15 bucks 😁 thank you and keep up the great work!!
Thanks to your video, I was able to complete our dryer repair successfully!
Thank you! The whole family has been down with the 'rona for the last few days and the dryer stopped heating. In addition to being sick we have a special-needs kid which means that laundry never stops in our house. Wife was stressing. Can't exactly ask someone to do a service call with a house full of contagious folks.
I'm fairly handy but wouldn't have figured out how to approach this repair without your video. Despite being sore all over and semi-feverish I was able to get this thing back up and running in about 24hr, including getting the parts from Amazon.
My model (DV210AEW) had a slight difference in the mounting bracket. Instead of two screws in the back, it's two tabs in slots in the bottom of the unit. I was excited at first because I thought I got off easy. Nope. Finally figured out that I had to tilt the dryer up a bit to pry those tabs loose from underneath. I think you're supposed to be able to rock the bracket out but there wasn't enough clearance.
I tend to hold mechanical engineers in high esteem, but I must say they could have designed this unit to be a lot simpler to repair.
Thanks again.
Awesome video 👏. I had done this fix once before but just used a little vacuum tool to clean the vent. I bought the kit this time and pulled 3 Plastic shopping bags full out of our vent exhaust. Also, your step by step was perfect. The stubby screwdriver was a must. Thanks for making it easier for me to get it done more quickly this time!
Nice work!
Just wanted to say huge thanks as well! Was able to get in and swap out the heating element. Great savings by being able to do it myself!
Great to hear Joshua
Thank you!!! My 10+ year old dryer still followed this video. behind all the fancy new tech, I guess the behind the scenes technology has remained the same. A cheap part off amazon and it’s back up and running!
I had my dryer quit heating and this video helped me fix it. Every step was just right. Thanks so much!
You're welcome Jimmy
We bought a used set which lost heat very quickly after purchase. You saved us a boatload, AND we had a fun project to do together. Thank you!