ฝัง
- เผยแพร่เมื่อ 12 มิ.ย. 2023
- I will be installing a set of StopTech slotted rotors and brake pads along with science of speed brake lines.
Products used in this video:
* Science of Speed Stainless steel brake lines.
www.scienceofspeed.com/index....
* Stoptech rotors and pads
www.buybrakes.com/stoptech-93... - ยานยนต์และพาหนะ
killin it! stay after it!
Thanks!
Great video! What are your wheel specs? J and ET, thanks
Thanks! I've made a video on the wheel specs here.
th-cam.com/video/F5Y_8bFRFP0/w-d-xo.html
Any chance you will do a comparison video OEM vs Stoptech brakes? 😁
I think that's gonna be hard since it's a bit subjective to each person's preference. My stock rotors and pads were getting faded so the brake was really soft. After replacing it with new rotors and pads it definitely bites more. You can go with new stock rotors and pads and will notice a better feel. Heck, just a set of new pads alone will make the brake feel better. The stock calipers do a pretty good job so that's why I kept it and didn't opt for BBK. Also adding new stainless steel brake line will make the brake feel firmer since it doesn't flex as much as the rubber brake line.
Hey man im coming from the vid where you put subs into your accord im doing the same and im stuck on the LOC part, do you remember how you connected it to your rear speakers? And what color wires you tapped into
Hey, the LOC should have 2 sets of wires, one for left speaker and one for the right speaker. I don't remember which color goes to which, but if there's a black wire coming from the speaker then connect to the black wire from the LOC.
Here is a diagram of the connection.
docs.google.com/drawings/d/1GxBs1Vg9YztS0a3x2Ilaf7KfesrXv3O_NyMBLBHZfnU/edit?usp=drivesdk
@@ducducgoose thank you!, one other thing the lead wire to the add a circut is so that the amp turns on and off with the car if im correct, instead of connecting it to the fuse box under the steering wheel couldn't I just connect it to a switch to turn them on and off
@@bobthesmurf6689the add-a-circuit is for convenience, some people connect it to the accessory slot so when they turn on the car it turns on the amp. You certainly can install a switch, but then you have to make sure you turn on the switch each time you start the car.
Hi, great video! Could please let me know what is that spray you used? What is the code? Thanks!!
This is the paint that I used.
www.autozone.com/paint-and-body/brake-caliper-paint/p/vht-cast-aluminum-brake-caliper-spray-paint-11oz/419011_0_0?cmpid=LIA:US:EN:AD:NL:1000000:PBD:19486091213&&CATARGETID=120054150001288829&CADevice=m&gclid=Cj0KCQjw1_SkBhDwARIsANbGpFuSY8wMf92SJNKTMDnugM5YKoyXbmiyPEW_ibVMfhIKSTQfpyke24MaAhNsEALw_wcB&gclsrc=aw.ds
Ty!!!!!!!!
Hey man. Any updates on the brakes upgrade? The brakes hoses do they make any difference? Cheers
Hey! The brakes feels a lot firmer, but only once you get it to temperature. As for the brake line, I didn't feel much of a difference. You can probably stick with the OEM brake lines.
@@ducducgoose thanks for the update and for the videos. Some of my improvements on the S2000 were based solely on your videos. Cheers
@@montecristo8624 great to hear that and thank you for watching!
what Stoptech rotors and pads did you get?
I bought the rotors and pads here
www.buybrakes.com/stoptech-934.40069-street-disc-brake-rotor-and-pad-kit-slotted-4-wheel-set
I got OEM brand new but have them 3 coats of high temp paint....got some brake lines to install....this video is very very helpful...as usual. Cheers.
@@montecristo8624 yup 3 coats of the high temp caliper paint and that should do it. This was a long project since I had such a hard time removing those screws from the rotors lol.
@@ducducgoose , for removing the tyres I bought a set of JIS screw drivers which are used by Japanese engineering. They fit correctly for Honda screws. That's a Japanese standard screw driver
@@montecristo8624 that's what I used in my video as well. But it didn't do much so I brought out the impact screwdriver and that did the trick.