Winner of giveaway is @beresbennet11 for proof: th-cam.com/users/shortsn4PaOBuihQs !! Giveaway entries is closing in approximately 2 hours. Not going to be on PC for a bit but I will be making a short video with proof of me noting down all names BEFORE the 7th day and spinning a wheel so can't be accused of rigging or nothing, will link it in this comment when done. I know I could use a TH-cam random comment picker or just a random number generator off of the amount of comments that exist but I reckon wheel would be cooler 🤑
Usually that means an issue with logic, do you mind contacting me through Discord since you'd be able to share images through that? My username on there is "tupisupi" without the quotation marks.
i like all the effort for all theese complex buildings but... i have yet to find actual practical setup for autounloading wood and rocks, then autoprocessing it and autoloading it back for sale without anything falling off or getting stuck. is there some kind of tutorial for something like that?
Yeah this unfortunately seems to be the case, I haven't seen any either. It's much more boring and harder from my experience to create good unloaders than loaders/processing machines. Splitting items evenly between trailers and such is quite difficult without any good detectors or reliable counters.
I would double check all measurements, check that the pulse clock is working and whether the interactors bounding box is actually hitting the switch on the alignment conveyor.
Great video mate. :) But maybe this could be replicable for hybrid wood ore setup? Perhaps the timing function could be rigged to also distribute evenly during loading? User: Plasmamagic
Definitely could I just want an all in one system where you can throw full trees with branches and it'll process everything for you so I'm waiting for them to revamp bandsaws.
For me, the storage drawer (the one where the car passes) dropped ores below the system. I know I may have an issue with logic but I can't find where it could be :(
@Pichoun_ Do you mind contacting me through Discord if you have that as its easier to share images and communicate. My username on there is "tupisupi" without the quotation marks. Otherwise give me your Roblox username and I'll try to join and check it out whenever our times match up.
I would recommend double checking the logic part of the system as based off what you are describing it seems that your pulse clock is working but it doesn't cycle back around so look at the latter components of the system and the wires returning.
@@KevinHasFound You remove some logistics, forge and refiner. Basically only have the same amount of columns of logic equal to your machine count so 6 forges and 6 refiners would have 6 columns of logic.
Idk if i messed something up but i swear everything is right and it only displays 1 pixel for like under a second, is this build broken or could i be doing something cus idk what to check either (V.1.74.0)
Do you mind contacting me via Discord so you can share media, my username on there is "tupisupi" without the quotation marks. I could also join you ingame whenever you are available.
I love Lumber tycoon type of game and oaklands is similar to it its just the Players playing it is too low and minding that my progress in the game will be waste since players only 400 - 1k
I use Autohotkey with the following script, replace Xbutton2 with the key you want to use to start the macro: Toggle := false Xbutton2:: Toggle := !Toggle if (Toggle) SetTimer, AutoClick, 10 ; Starts the timer with 100ms intervals else SetTimer, AutoClick, Off ; Stops the timer return AutoClick: Click return
I don't unfortunately have any. I'm waiting for bugs to get fixed before I start designing one because of the item auto anchoring being such a major issue.
I recommend reading these, first is a link to the github issue report, second is a link to a message in the games Discord server by someone ranting about it: github.com/typical-developers/oaklands-feedback/issues/221 discord.com/channels/865737627712749579/1230305347126956095/1313178241422332035
W editing... so entertaining to just watch any kind of stuff from ya ❤also whats the secret for all data cash 👀player market or grinding ? Also for the milestone special: since you a technician how about challenging yourself in building, and build something special for 500 subs DARK_ARCADER
Thank you I really appreciate that 🫶 I got most of my cash from abusing badly priced resources and trading. I will consider that building challenge for 500 subscribers!
Winner of giveaway is @beresbennet11 for proof: th-cam.com/users/shortsn4PaOBuihQs !!
Giveaway entries is closing in approximately 2 hours.
Not going to be on PC for a bit but I will be making a short video with proof of me noting down all names BEFORE the 7th day and spinning a wheel so can't be accused of rigging or nothing, will link it in this comment when done. I know I could use a TH-cam random comment picker or just a random number generator off of the amount of comments that exist but I reckon wheel would be cooler 🤑
Can i have 1m..
Amazing❤.Cant wait for wood processing system!!
Ayeee this is awesome, great content brother!
I've been waiting so long for FR9, gj
Much appreciated! Thank you for the SVGs 🤑🙏
I want to build it but dont have the motivation to play oaklands.
same
0:15 was clean 😮💨
Good luck everyone,
VeryBigVirus
well well well finally after all this time there is a ore processer :)
YESSSS!! this is peak right here
manduck07
OMFG ITS HERE
W tutorial
SquidOfStorms
Nice
ZOMBIESPROI
This thing is CRAZY
Indeed is 🤑🤑 Can't wait to see what'd be possible for a wood processing setup when they improve bandsaws.
Little bit laggy but i so love it its real best ore procesing things.
You are a genius
I got a stroke looking at the amount of forges and refiners
Sorry 😭😭
Another video of setups, sweet, sounds promising.
CHEFHUNTER43
Yo man need tis so much
Bratorsortnal user
W tutorial (M4nne)
Nice
BellerooP
this is actually the best one yet!
terayuki0843
This is amazing
Ro8111
I need that
kolorowyziom
For me the materials sometimes just appear in the front box or the middle. It usually works just its annoying.
Usually that means an issue with logic, do you mind contacting me through Discord since you'd be able to share images through that? My username on there is "tupisupi" without the quotation marks.
i like all the effort for all theese complex buildings but... i have yet to find actual practical setup for autounloading wood and rocks, then autoprocessing it and autoloading it back for sale without anything falling off or getting stuck. is there some kind of tutorial for something like that?
Yeah this unfortunately seems to be the case, I haven't seen any either. It's much more boring and harder from my experience to create good unloaders than loaders/processing machines. Splitting items evenly between trailers and such is quite difficult without any good detectors or reliable counters.
@tupisupi sorry for late reply. they could fix it by adding placable sell point but that would probably be too OP
Oke I have to do this 😂
i used the machine but the rocks stayed there and did not move into the alignment conveyors
I would double check all measurements, check that the pulse clock is working and whether the interactors bounding box is actually hitting the switch on the alignment conveyor.
what the sigma
Great video mate. :) But maybe this could be replicable for hybrid wood ore setup? Perhaps the timing function could be rigged to also distribute evenly during loading?
User: Plasmamagic
Definitely could I just want an all in one system where you can throw full trees with branches and it'll process everything for you so I'm waiting for them to revamp bandsaws.
ttkill123 this is peak
For me, the storage drawer (the one where the car passes) dropped ores below the system. I know I may have an issue with logic but I can't find where it could be :(
@Pichoun_ Do you mind contacting me through Discord if you have that as its easier to share images and communicate. My username on there is "tupisupi" without the quotation marks. Otherwise give me your Roblox username and I'll try to join and check it out whenever our times match up.
Great content bro and marry Christmas ❤
User:StaticRuthless
homemmalvadomuito
Is there going to be a tutorial to make a Unloader for it, just asking
Not 100% sure but unlikely.
Very nice
User: Greydeator
bro thank you so much this made me so gay thank you tupistupi this completely made me gay
Hi, My lcd isnt staying on when i flip the switch
I would recommend double checking the logic part of the system as based off what you are describing it seems that your pulse clock is working but it doesn't cycle back around so look at the latter components of the system and the wires returning.
Does this work with less forger and refiners? Like instead of 12, can I do 6 instead?
Yes it does, can be scaled from 2 to up to 76 refiners and forges if you start rotating them and placing at an angle.
@tupisupido I have to change the logics a bit or just straight up remove the forger and refiner?
@@KevinHasFound You remove some logistics, forge and refiner. Basically only have the same amount of columns of logic equal to your machine count so 6 forges and 6 refiners would have 6 columns of logic.
Update: it worked and I decided to remove the 2nd collider and it worked just fine for me.
Need The fastest press machine
My pear video has a pretty good and a simple one but maybe sometime in the future if I feel like it!
storage not works...
Make sure that the storage drawer isn't locked.
@tupisupi nwm ıts just ım stupıdo :D
@archybalt6153 Happens sometimes :DD Don't worry about it
DnioPlayz_YT (Display is Nameless)
I love this keep up the great work
Can u use this design also with less refiners and forges? cuz i don`t have 790k cash in game xD
Yes its basically scalable up to 12 refiners/forges, I should have mentioned that in the video.
I have a question do you know of a good automatic unloader and loader for pre and wood
I unfortunately don't, you could look at my hybrid one for inspiration but I wouldn't recommend building a 1:1 replica of that.
how do you make the noclip storage drawer? im confused
He used a collider found in Alan’s logic
Idk if i messed something up but i swear everything is right and it only displays 1 pixel for like under a second, is this build broken or could i be doing something cus idk what to check either (V.1.74.0)
Do you mind contacting me via Discord so you can share media, my username on there is "tupisupi" without the quotation marks. I could also join you ingame whenever you are available.
Does this still work after they tried to nerf drawers to refineries?
Yeah cuz they reverted/cancelled that change
Is there a way that i can make it like 2 forges and refiners?
Yeah, this can be scaled anywhere from 2 to 72 or 76 machines, I can't remember the exact count. You'd just need less logic and alignment coneyors.
So -10 of all logic execpt for num interfaces LCD and blocker?
Same thing with conveyors 2?
Acutally nvm
Ima just make my own version of this
make one for wood please 🙏
I'm waiting for a bandsaw revamp and items auto anchoring mid air bug to be fixed.
i was here
Good luck for everyone!
beresbenett11
Hey you won the giveaway th-cam.com/users/shortsn4PaOBuihQs, when are you available to claim?
🤑
I love Lumber tycoon type of game and oaklands is similar to it
its just the Players playing it is too low and minding that my progress in the game will be waste since
players only 400 - 1k
I will build this for sure. And which autoclicker do you use?
(My nick: erino7689 )
I use Autohotkey with the following script, replace Xbutton2 with the key you want to use to start the macro:
Toggle := false
Xbutton2::
Toggle := !Toggle
if (Toggle)
SetTimer, AutoClick, 10 ; Starts the timer with 100ms intervals
else
SetTimer, AutoClick, Off ; Stops the timer
return
AutoClick:
Click
return
hi
W build and i would be greatful to win so i hope i can Vulxingxbl
thanks tupisupi (i got banned from the discord for trolling someone lol)
Rip 😭
is there any good unloaders to this and if there is can you please put the title and the platform in the comments 😅😅
I don't unfortunately have any. I'm waiting for bugs to get fixed before I start designing one because of the item auto anchoring being such a major issue.
ok thx for the info could you update us when u make one or the update gets fixed?@tupisupi
Hopefully yeah 🙏
@tupisupi Wdym auto anchoring btw?
I recommend reading these, first is a link to the github issue report, second is a link to a message in the games Discord server by someone ranting about it:
github.com/typical-developers/oaklands-feedback/issues/221
discord.com/channels/865737627712749579/1230305347126956095/1313178241422332035
Imtrucks4life
or just use a refinery and forge on a line of conveyors so it doesnt cost 3 million and 4 hours to make for only a minute time save
Bu- but my 200% more expensive and only 10% faster factory is... is WAY cooler 😭
tupi can you build me this? ill pay you
Not sure atm, I will think about this. If I do I'll prolly make an #oakmarket post in the games Discord server where I'll offer my services.
Not watching allat
Awesome video dude! Im def gonna build this when i have enough money! user = coolkwakie
W editing... so entertaining to just watch any kind of stuff from ya ❤also whats the secret for all data cash 👀player market or grinding ?
Also for the milestone special: since you a technician how about challenging yourself in building, and build something special for 500 subs
DARK_ARCADER
Thank you I really appreciate that 🫶 I got most of my cash from abusing badly priced resources and trading. I will consider that building challenge for 500 subscribers!
user: DLEGuis @LK_Chimpin, cool build bro
The_tomahwk
ayee
keeyan_bts137
W VID! I APPRECIATE IT. (my user is x_Lvke)
Im 100% building this username: kroblox19_yt
Nice
ZOMBIESPROI
Nice
ZOMBIESPROI
Nice
ZOMBIESPROI
Nice
ZOMBIESPROI
Nice
ZOMBIESPROI
Nice
ZOMBIESPROI
Nice
ZOMBIESPROI
Nice
ZOMBIESPROI
Nice
ZOMBIESPROI
Yeah buddy ur disqualified for commenting 10 times ☠️