Heres a personal tip from me: When you change your stirngs dont cut your old ones, aave them. Weve all snapped a high E (or in my case a low E [somehow]) at least once in our lives. Saving your old strings can get you out of a pinch
@@xvor_tex8577 We all knew there's no stairway to Heaven... there's just a ledge, a super thin bridge with Hell under it, and Heaven on the other side.
Muhammad Zulkhairi Mohd Nasir he meant the song stairway to heaven the guy in 3:46 played the same chords of the song but altered it a bit, Because there is a joke from a movie that it’s illegal to play this song on guitar stores, the song called ‘Stairway to heaven’ from Led Zepplin it’s an amazing song you should check it out
@@xvor_tex8577 I know... just thinking about doing some da'wah while talking about music. It's common in my country. "May Allah grants us ease during the day that we have to cross that BRIDGE to Heaven, that is thinner than the first E string!" Amen!
@@kairinase Wrong...there is no "bridge to heaven", and Sheol is beneath us. ויחלם והנה סלם מצב ארצה וראשו מגיע השמימה והנה מלאכי אלהים עלים וירדים בו׃
It's been my experience after over 30+ years of suffering from what | call Obsessive-Compulsive Hyper-Critical Guitar String-Blaming Disorder (OCHCGSBD) that it indeed comes down to Phosphor/Bronze and 80/20. In general, Phosphor/Bronze strings can be considered the "Great Equalizers". On a "modest" guitar (less than $1,000, say) the Phosphor/Bronze can work wonders at helping the instrument sound pleasing. They have a generic sound that can cover over a cheaper guitar's imperfections. Also, it is very true that they last longer than 80/20s. It's when you get up into the high-end of the acoustic guitar world that the 80/20's begin to make more sense. The 80/20s, short-lived though they are, are the strings that make a Martin, a Gibson, an old Westerly Guild F50r, sound completely unlike each other; and completely like themselves. In short, if you want to hear what your guitar really sounds like, use 80/20s.
Thank you, I been playing for decades without taking lessons or learning to read music and I never knew all the differences you showed me here. Thanks again.
Why people dislike these informative detailed videos (1080p/60fps with good camera angles and accurate info)? TH-cam should put a description box within the dislike button, and if you want to dislike a video you cannot do unless you leave 1 to 2 sentences describing the reason or reasons why you dislike the video... This video has no errors; not that I noticed, it's one of those good very well made ones.
Talk to your god. Haha. Problems start there my friend. Not directed at you. But I would say, everybody shouldn't be able to freely procreate, but hey. Freedoms and what not I guess.
Keeping the pack to remind you what is on the guitar is a good idea. Having multiple guitars, it is also a good idea to write the date installed on the pkg.
I got a cheap set of digital calipers off amazon just for this. Now when I buy a used guitar and want to play it right away (if its set up right) I can just out the same guages on until I put heavies on
Have you ever compared them to Ernie Ball Power Slinkys? I've always wanted to try a set of GHS Boomers, so I'm very curious about the tonal differences between the two brands.
Higher tension/ heavier gauge strings are not necessarily louder, but they are always more difficult to play. That means you can't get as many practice hours in with them before fatiguing and/or risking injury. Furthermore, a healthy and effective left hand technique entails an efficiency in effort and tension of the hand. Lower gauge /tension strings are more prone to bend sharp if excessive pressure is exerted, meaning (apart from needing less effort in the first place) it is easier to notice when excessive pressure is being used. These are some reasons why someone might choose lower gauge /tension strings. Try a bunch different sets and see what you like. As a word of warning, many brands do not call their high gauge /tension strings as such, and their range goes from "extra light" to "medium" as a max.
I use a light gauge electric jazz flat wound on my Acoustic guitar. I like playing bar chords and this string gets rid of the zip sound when you change bar chords. It makes it sound much clearer too.
Pro tip if you have a Fender Jazzmaster or Jaguar with the original threaded barrel bridge saddles, flat wound strings are a MUST. Otherwise your strings will jump out of the slots all the time. Flats (I use d'addario chrome 11s) solve that... Mostly. I had to use abrasive cord on the low E saddle off my Jag so it sits down better. Just as an experiment I put flats on my SG, it sounds like a different guitar.. I like it.
I've been using D'Addario Phosphur Bronze .11's for my acoustic and D'addario Nickel Wound .10's on my electric for a decade. Just bought 6 different brands and makes of string for each, to try them all and settle on what works best for me 10 years later. If Tommy Emmanuel says a guitar "gets used to" a particular brand of strings, and you might get a better sound by changing, I believe him.
I still wipe my strings with rubbing alcohol. Back in '74 my teacher commented on how good the guitar sounded. You can't do a lot for fatigue, but dirt & oil can be removed. It just makes the guitar sound better, and goes a long way to enhancing the longevity. -"Mad" Max Speedwell
I also wipe my strings with a lint free cloth but I dampen it very slightly with lemon oil (and keep it in a heavy duty freezer bag in my guitar case).
So helpful, thank you! I love the interviews with people of different preferences, really gives some concrete examples of the practical impact that string gauge choice has on play. Lovely presenter as well :)
Balanced tension sets are starting to catch on. I tried a set fairly similar to my usual hybrid guage light top medium/heavy bottom. The Balanced Tension were that extra bit of comfort though i wish i could get half rounded ones.
I have a tried and tested system. Buy a really big box of strings. Its cheaper and saves you having to think about it. I've tried loads and now buy d'addario 10-46 regular... unless I can get something cheaper in bulk. Find a gauge, buy in bulk. Have fun.
Many stock electric guitars from factories come from the factory with 9-42 gauge. If you plan to increase the gauge you gonna have to reset the guitar...which is Truss Rod adjustment, String Height, Pickup height, Intonation. I play primarily metal and I don't like 9-42. While that gauge is really easy to bend, on fast licks that also have bending my playing becomes sloppy. 10-46 is what I prefer. It has a decent tension and it's enough tension to get rid of the sloppiness and the strings aren't that hard to bend either.
I can recoment Ernie Ball 2222 9-46 strings for all Electric guitars. They last long, the lighter strings are easy to play and the heavyer strings are more fat and sound great for powercords and riffs
It's probably broken, same as mine's 60's Guyatone. It's there but does nothing. Common thing with guitars so old and so cheap. I run it with low tension as well with .010-.046 in C-Standard.
There are Ball End Nylon Strings which make restringing the Classical Guitar a snap and actually it also lets the strings come out of the bridge at a steeper angle over the saddle.
I used 11-54 for years Then i went 10-38 Never changing back especially on single coil. Personally they say it's about feel tho most of the time how the string react and sounded were kind of important when u can handle the heavy set. I still use normal gauge on humbucker tho depends on tuning tho i prefer sticking to the same.... Just went baritone of i ever wanted to go lower anyway.
For my pure acoustic guitars, I normally use Martin Marquis Phosphor Bronze light, 12-54. But, for my acoustic/electrics with magnetic pickups, I use DR Zebra lights, 12-54. The windings of the bass strings alternate between phosphor bronze and nickel. My guitar would have more bass and less treble when plugged in, and still have a decent acoustic sound when unplugged. My electric guitar strings of choice is Ernie Ball Paradigm 10-46.
Great video. I would also add when changing between gauges, give yourself some time to adjust to the new feel of the string gauges as your fingers won't be used to it and will feel uncomfortable for a while
Great video! I finger pick my 1980 Ibanez Blazer in a Mark Knopfler style and use the super crazy thin Gibson 7's. Yes, many will say they lack volume, but that's what the pick-ups are for, eh?
I'm currently using Flatwound Strings on my Jasmine S35 Acoustic Guitar so that I can record with it better and eliminate the string noise. Thomastik Infeld needs to add instructions with their Strings because people could install them properly and avoid string breakage
definitely wished I had known this before trying to tune my guitar to drop B tuning and broke my high e string. Guessing it must have been standard gauge.
I’m a GHS artist. “I only play with the best “ I use the Burnished roller wound nickel , it’s almost a simiflat wind. I use a custom sizing 10/14/18/26/38/50 Heavy at the bottom , med in the mids , light at the top. Best most consistent tone I’ve ever had. 🤠🎸🎶🤟✌️
I like GHS boomers. I've always used nines but the Ibanez jazz guitar I'm playing now came with tens and I loved the way it played and sounded so I'm still using tens on it (but still GHS Boomers). I just put a set of Martin Silk and Bronze (elevens) on my old Framus acoustic and I'm in love but I still want to try a set of La Bella Silk and Steel elevens on it because they've sounded downright magical on every guitar I've heard that used them.
I already have hard calluses but for some reason i really love guage 8 strings.. looking forward to buying Paradigm guage 8 maybe next month because i keep breaking my high e string.. fun fact, i broke 2 sets of guage9 within 3 months.. but when i switched to guage 8 it lasted me half a year before breaking! hahahahaha.. anyway, i have faith in Paradigms.. heck, even slash can't break them.. so hopefully they'll last really long for me. and no i wont switch to a thicker guage because the way i play, i bend the shit out of every guitar i play whether it be mine or not.. i'm practicing to be like a really fast shredder.. and having very light guage strings really helps.
0:32 "Putting acoustic guitar strings on an electric wouldn't sound as good." Oh I beg to differ, it gives a more mellow sound. Really nice, especially on lower tunings.
So, they (acoustic strings) actually work on an electric guitar. I just assumed that acoustic strings didn't have a strong reaction with the pick ups magnets.
@@Reginaldesq I've had acoustic strings on one of my guitars twice and it has a unique tone, nice when playing mellow things and on slightly lower tunings.
☑ Good review ❗ I find d'addario generally all around best for acoustic and archtop electric and classical , I also highly favor Elixir brand for acoustic my main genre ; use 12's on acoustic maybe a shade lighter but never heavier ; use 11's on archtop but never lighter ; play finger style most all the time , arpegiated open chords for accompaniment to vocals , not much bends ❗🥸😊
I use Elixars on everything expect my Les Paul ,if you want an extremely high output try Optima s made in Germany and their 24 kt gold plated highest output I've ever seen and they sound so good with tons of gain (Brian May's string of choice) with a Vox AC 30 they are divine .They last tone wise very well .
i did mount classical on an acoustic by tying a bunch of knots in the end so they would not come through the holes past the pin, it worked, it sounded alright, but i knew deep down it wasnt. :P
I just listened to my guitar tech. I am now in his band and play 11-56 strings after a lifetime of playing 9's. I don't think I can go back. I don't do a lot of huge bends, so the chugga chugga of metal seems to fit me. Even though I am not a metal guitarist by nature.
I was using earnie ball strings for 10 years!!! And i thought it was normal for your fingers to feel like they’re getting cut from sliding, i swithched yesterday to daddario nyxl 10/46 and i could believe that i can just slide mindlessly without my fingers hurting.
Let's see how many people will tell me I'm wrong... I throw D'Addario's EXL 110 on all of my guitars... Fender Jaguar? EXL 110. Fender Jagstang? EXL 110 Yamaha FG-413s? EXL 110. HK S3991? You guessed it! EXL 110. Yeah, those last two are (semi-)acoustic, yes I have heard all the warnings about doing this. You know what I also got? Compliments on my acoustic tone from professional players. Also, I do this for about 8 years now, and NEVER has my acoustics been damaged by doing this! Do with that what you like...
@John I can't say I disagree much with you on that. Not much players tell me the strings themselves suck, and those that do are indeed obsessed with Ernie's. The criticism I was talking about is along the line of "You can't put those strings on an acoustic! Too much tension will make them warp or even break the bridge off!". And like I said, I've never encountered this problem myself. But it is good practice to mind tension in regard to different guitars. And it is true, acoustics are prone to damage due to over-tension. So be careful with those! Electrics are usually more forgiving in that regard. Playability might change, adjustments might be needed but damage is often avoided or easily repairable. Again, that is my experience... I do not 'advise' anyone to put 'electric'-strings on their acoustic guitars, all I'm saying is that I personally have found no real trouble doing so. Keeping tension fairly medium-low shouldn't damage it. The sound might not be to everyone's liking though... Try at your own risk!
What is missing here is a warning for new players that you can't play steel strings on a classical guitar, since they aren't built with that tension in mind. That's especially important for the target audience for this video. The next would be stretching the new strings, so they'll stay in tune. Wiping down the strings makes only sense if you wipe down the side facing the frets as well. If the cloth isn't lint-free, you can loose tone when some of it gets stuck between the string windings. "When do players think it's time for some new strings?" would be a good question, since the string changing intervalls differ a LOT depending on the player. Old strings aren't good for the guitar, nor the ear of the player.
Daddario EJ-16 light gauge Phosphor Bronze .012"-.053" Acoustic strings and Daddario EXL-110 .010"-.046" light gauge Nickel electric strings are the best selling sets ever. Lately though, Daddario has seemed put their money into their various new crappy strings, like their over-priced NYXLs and odd Nickel Bronze Acoustic sets. Not sure why, but I think this was done to combat Ernie Ball's new exotic metal string sets (that also have issues). I've seen a lot of high strings break in the standard Daddario sets lately, which never used to happen, and I install about 25 - 40 sets a week on customer guitars.
I usually use 10s. I bought a PRS SE c24 off a guy and dropped it off at a shop for a setup. Decided to try 9s. Damn it makes a huge difference. It's like playing with rubber bands! I'll stick with the 10s.
I’m kinda new to guitar and I’m trying to bend on my electric strat. Thought it was just me (could be) but now I’m convinced it’s the strings. They aren’t really bending if that makes sense.
hi so i’m pretty new to the whole guitar world so i’m not really sure what strings to get. i play a fender strat and i like to play a lot of indie and alt rock songs, any recommendations on what strings to get?? :)
I don't know about other players but washing my hand just before playing increases the likelihood of cutting the tips of my fingers. Freshly washed hands are very soft. That's just my personal experience. Of course, I don't dig in the garden then play my guitars. Clean hands are a good practice; just wait a while before playing slides or pulls.
So my High E string snapped today and I’m new to guitar. So I just wanted to ask if the strings pack have all the strings like “E,B,G...” or do I choose which one I want?
A single pack of strings will have E A D G B E. You can find packs that come in sets of 3. ALWAYS buy a couple sets of strings in case you snap one. I must have about 5 sets for my double neck because it's always the 4th string (G) that snaps first. Hope this helped
I keep it simple. Whatever strings, the manufacturer of the guitar put on are usually the best ones for that particular instrument after the company put a lot of thought into it. Why reinvent the wheel. My fender came with nines and that’s what I use. They sound great.
Did you mean to say you prefer "light tops, heavy bottoms" for your own playing? I've never heard of anyone using "heavy top low bottoms." Heavy tops would make bending the trebles more difficult, and low tension bottoms would give weaker signal for your distorted lower pitches.
Very informative video sir., thanks for the knowledge... anyway, I am using gauge 8 on my Ybanez S420 electric guitar, is it okay? does it match with my guitar? I need your advice.. thank you in advance.
Don't recommend mediums to someone at a level who doesn't even know what strings they like. They're heavier & require you get your guitar set up for the added tention. Electrics come with 9s, sometimes 10s, stock. Normal acoustics usually always come with 12s stock.
The Austrian company Dr. Thomastik used to make steel strings for classical guitar with a really bright tone, almost like a bell. Bass lines were wrapped with silk and the trebles had a nylon coating. Unfortunately they were discontinued, maybe the price put people off? Almost 50 bucks for a set was a bit much really.
I usually go to Musician's Friend catalog and order lite Gauge acoustic-electric string packs. They used to be 5 set packs for $10.oo. Perfect for electric guitar. You have to sort out the strings, though, cause there are no Individual paper sleeve per string.
You should stick with the size that the guitar manufacturer recommends for your instrument. My son had a twisted neck on his 12 string from using heavy gage. I was able to straighten it, he was lucky. Also stick with the size strings the guitar was set up with. It could change the relief and effect the action and the nut grooves may be too tight. Heavier strings put more stress on an instrument. Telling folks to put whatever size they want is bad advice in my opinion. I mean no harm with this comment and it is nothing personal, I love StewMac, you guys are the best.
WillWilsonII We “real musicians” understand the importance of keeping the bass player in it’s place, through gaslighting, intimidation, ultimatums, and generally bad life guidance. That way the bass player becomes dependent on the love we never provide them. It’s basically why you’re not allowed to pet a service dog, despite its high value and years of training. Don’t be nice to the bass player, or you’ll be sorry; it will become Jaco Pastorius, who didn’t understand his place in the hierarchy until he was killed by a bouncer at a club. On stage, the bass player belongs behind the lead guitarist / singer, to the side of the drummer, who is the house slave of the band.
Well this it's a video about guitar strings and not a bass string video! My advice it's instead of typing about guitar strings, there are so many videos of bass strings and anything about bass topics! You are watching the wrong video if you are a bass player!
Wash your hands before and wipe your strings after playing, is the best advice you can get.
yep, the sweat can also mess up the finish on vintage guitars.
thanks! i was just about to say about the same.
I also use fastfret
You can also clean strings just by using a pencil eraser. It works fine and the strings get back to their brightness.
@Flatus Antiquitous I don't use coated strings.
Really glad this wasn't an advertisement for a certain brand.
Elixir
Ernie Ball: 👁️👄👁️
Heres a personal tip from me:
When you change your stirngs dont cut your old ones, aave them. Weve all snapped a high E (or in my case a low E [somehow]) at least once in our lives. Saving your old strings can get you out of a pinch
I used to splice them when I broke one and the shops were closed.
Good for when your garrote break too sir.
Best review : Elixir first And Elixir in second, third etc. :) th-cam.com/video/aHVGMpnpu_w/w-d-xo.html
the best strings : th-cam.com/video/oWTb9Ze4dZg/w-d-xo.html
ill keep this in mind.
picking up the guitar very soon and im dedicating my time to it because I want to be amazing.
Thank you for having different players giving input on their preferred strings
3:46 when you want to play stairway to heaven but you don’t want to be kicked out of the guitar shop
Ziggy Craft Lol 😂
@@xvor_tex8577 We all knew there's no stairway to Heaven... there's just a ledge, a super thin bridge with Hell under it, and Heaven on the other side.
Muhammad Zulkhairi Mohd Nasir he meant the song stairway to heaven the guy in 3:46 played the same chords of the song but altered it a bit,
Because there is a joke from a movie that it’s illegal to play this song on guitar stores, the song called ‘Stairway to heaven’ from Led Zepplin it’s an amazing song you should check it out
@@xvor_tex8577 I know... just thinking about doing some da'wah while talking about music. It's common in my country.
"May Allah grants us ease during the day that we have to cross that BRIDGE to Heaven, that is thinner than the first E string!" Amen!
@@kairinase
Wrong...there is no "bridge to heaven", and Sheol is beneath us.
ויחלם והנה סלם מצב ארצה וראשו מגיע השמימה והנה מלאכי אלהים עלים וירדים בו׃
i’m somewhat new to guitar and i had no idea strings were such a complex subject omg
Yeah, the change the tone a lot!
Can't go wrong with Ernie Balls for your electric. I prefer 9s.
Same its pretty confusing
i just started last week and i’m fully agree with you 😭😭
@@leiikivlit doesnt even matter that much - you can do anything on any gauge, really. just get some ernie ball 9's
_I usually recommend "Medium" strings_
*0.13 gauge set*
I didn't realize SRV was still alive
Its for acoustic
@@monocyte2210 Like 0.13 electric vs 0.13 acoustic are *so* different...
13s ARE medium on an acoustic guitar. 11 would be "light" and 12 "medium light" according to D'Addario.
can artunç pussy, just use .015 flats.
I play guitar for a living and this is what I found the most confortable (in standard tuning)
Scale 25’5: 9-46 hybrid set
Scale 24’75: 10-46
No matter what your playing ability is from green to pro there is always something to learn from videos like these.
@RDE Lutherie Care to elaborate?
@@maxsilbert He means take advice from a technician not a salesman/shop owner
@@V12509 I understood that, I think I meant to elaborate on the "important stuff" they supposedly left out.
It's been my experience after over 30+ years of suffering from what | call Obsessive-Compulsive Hyper-Critical Guitar String-Blaming Disorder (OCHCGSBD) that it indeed comes down to Phosphor/Bronze and 80/20. In general, Phosphor/Bronze strings can be considered the "Great Equalizers". On a "modest" guitar (less than $1,000, say) the Phosphor/Bronze can work wonders at helping the instrument sound pleasing. They have a generic sound that can cover over a cheaper guitar's imperfections. Also, it is very true that they last longer than 80/20s.
It's when you get up into the high-end of the acoustic guitar world that the 80/20's begin to make more sense. The 80/20s, short-lived though they are, are the strings that make a Martin, a Gibson, an old Westerly Guild F50r, sound completely unlike each other; and completely like themselves.
In short, if you want to hear what your guitar really sounds like, use 80/20s.
Thank you, I been playing for decades without taking lessons or learning to read music and I never knew all the differences you showed me here. Thanks again.
Why people dislike these informative detailed videos (1080p/60fps with good camera angles and accurate info)? TH-cam should put a description box within the dislike button, and if you want to dislike a video you cannot do unless you leave 1 to 2 sentences describing the reason or reasons why you dislike the video... This video has no errors; not that I noticed, it's one of those good very well made ones.
Talk to your god. Haha. Problems start there my friend. Not directed at you. But I would say, everybody shouldn't be able to freely procreate, but hey. Freedoms and what not I guess.
Just ignore the dislikes who cares honestly
@Nickhead87 WHo the hell is going to read the "1 or 2 sentences" when disliking the video lmao
I don't know
I’ve always just used the cheapest string that were on sale lol
🤣
Why are you even here hahaha
It doesn't matter that much as long as you have the right gauge
Steel strings , sounding better.
Im with you brother :')
Keeping the pack to remind you what is on the guitar is a good idea. Having multiple guitars, it is also a good idea to write the date installed on the pkg.
I got a cheap set of digital calipers off amazon just for this. Now when I buy a used guitar and want to play it right away (if its set up right) I can just out the same guages on until I put heavies on
Or just take a pic with your phone
I fell in love with the GHS Boomer 0.11 set. They just ring out like nothing I have ever heard before. "Personal Preference"
I've been using GHS Boomers 10's for years. They're great strings.
Have you ever compared them to Ernie Ball Power Slinkys?
I've always wanted to try a set of GHS Boomers, so I'm very curious about the tonal differences between the two brands.
Higher tension/ heavier gauge strings are not necessarily louder, but they are always more difficult to play. That means you can't get as many practice hours in with them before fatiguing and/or risking injury.
Furthermore, a healthy and effective left hand technique entails an efficiency in effort and tension of the hand. Lower gauge /tension strings are more prone to bend sharp if excessive pressure is exerted, meaning (apart from needing less effort in the first place) it is easier to notice when excessive pressure is being used.
These are some reasons why someone might choose lower gauge /tension strings. Try a bunch different sets and see what you like. As a word of warning, many brands do not call their high gauge /tension strings as such, and their range goes from "extra light" to "medium" as a max.
I use a light gauge electric jazz flat wound on my Acoustic guitar. I like playing bar chords and this string gets rid of the zip sound when you change bar chords. It makes it sound much clearer too.
Interesting. How do they play?
Pro tip if you have a Fender Jazzmaster or Jaguar with the original threaded barrel bridge saddles, flat wound strings are a MUST. Otherwise your strings will jump out of the slots all the time. Flats (I use d'addario chrome 11s) solve that... Mostly. I had to use abrasive cord on the low E saddle off my Jag so it sits down better. Just as an experiment I put flats on my SG, it sounds like a different guitar.. I like it.
I've been using D'Addario Phosphur Bronze .11's for my acoustic and D'addario Nickel Wound .10's on my electric for a decade.
Just bought 6 different brands and makes of string for each, to try them all and settle on what works best for me 10 years later.
If Tommy Emmanuel says a guitar "gets used to" a particular brand of strings, and you might get a better sound by changing, I believe him.
Ernie Ball Power Slinkys...my new favorite gauge
Little bit more thickness but still bendable
I still wipe my strings with rubbing alcohol. Back in '74 my teacher commented
on how good the guitar sounded. You can't do a lot for fatigue, but dirt & oil can
be removed. It just makes the guitar sound better, and goes a long way to
enhancing the longevity.
-"Mad" Max Speedwell
I also wipe my strings with a lint free cloth but I dampen it very slightly with lemon oil (and keep it in a heavy duty freezer bag in my guitar case).
Don Crowder that’s actually a great idea!
So helpful, thank you! I love the interviews with people of different preferences, really gives some concrete examples of the practical impact that string gauge choice has on play. Lovely presenter as well :)
Balanced tension sets are starting to catch on. I tried a set fairly similar to my usual hybrid guage light top medium/heavy bottom. The Balanced Tension were that extra bit of comfort though i wish i could get half rounded ones.
I have a tried and tested system. Buy a really big box of strings. Its cheaper and saves you having to think about it.
I've tried loads and now buy d'addario 10-46 regular... unless I can get something cheaper in bulk.
Find a gauge, buy in bulk.
Have fun.
finally the video ive been looking for. i am relieved. thank you so much.
Glad it helped!
Many stock electric guitars from factories come from the factory with 9-42 gauge. If you plan to increase the gauge you gonna have to reset the guitar...which is Truss Rod adjustment, String Height, Pickup height, Intonation. I play primarily metal and I don't like 9-42. While that gauge is really easy to bend, on fast licks that also have bending my playing becomes sloppy. 10-46 is what I prefer. It has a decent tension and it's enough tension to get rid of the sloppiness and the strings aren't that hard to bend either.
I can recoment Ernie Ball 2222 9-46 strings for all Electric guitars. They last long, the lighter strings are easy to play and the heavyer strings are more fat and sound great for powercords and riffs
2:08
Isn't that a truss rod adjustment head sticking out of the back of the neck? I'm pretty sure my Teisco has the same thing.
It's probably broken, same as mine's 60's Guyatone. It's there but does nothing. Common thing with guitars so old and so cheap. I run it with low tension as well with .010-.046 in C-Standard.
There are Ball End Nylon Strings which make restringing the Classical Guitar a snap and actually it also lets the strings come out of the bridge at a steeper angle over the saddle.
With an electric guitar start with Nines or Tens, then when you get the feel for them and need a replacement set, replace with the same.
I used 11-54 for years
Then i went 10-38
Never changing back especially on single coil.
Personally they say it's about feel tho most of the time how the string react and sounded were kind of important when u can handle the heavy set.
I still use normal gauge on humbucker tho depends on tuning tho i prefer sticking to the same....
Just went baritone of i ever wanted to go lower anyway.
I known your feel bro, i switched from 11-52 to 9-42
For my pure acoustic guitars, I normally use Martin Marquis Phosphor Bronze light, 12-54. But, for my acoustic/electrics with magnetic pickups, I use DR Zebra lights, 12-54. The windings of the bass strings alternate between phosphor bronze and nickel. My guitar would have more bass and less treble when plugged in, and still have a decent acoustic sound when unplugged. My electric guitar strings of choice is Ernie Ball Paradigm 10-46.
Great video. I would also add when changing between gauges, give yourself some time to adjust to the new feel of the string gauges as your fingers won't be used to it and will feel uncomfortable for a while
This is fantastic advice. Thanks! Wish I had seen this years ago.
I like the casual vibe of this video, it makes it more welcoming for guitar players like me who aren't fully well versed on guitar yet 👍👍😁
Great video! I finger pick my 1980 Ibanez Blazer in a Mark Knopfler style and use the super crazy thin Gibson 7's. Yes, many will say they lack volume, but that's what the pick-ups are for, eh?
I'm currently using Flatwound Strings on my Jasmine S35 Acoustic Guitar so that I can record with it better and eliminate the string noise. Thomastik Infeld needs to add instructions with their Strings because people could install them properly and avoid string breakage
Wow that cheeky hidden stairway to heaven in the back during the bit about electric strings
Everything I was looking for in one! Best tutorial video on understanding your strings 💯🔥
definitely wished I had known this before trying to tune my guitar to drop B tuning and broke my high e string. Guessing it must have been standard gauge.
James Sealy lol i just did the same thing thats why im here
This was super helpful and well done. Strong work.
Me watching this after my high e string broke lmaooo
Here here! 😅
Same here 😂
Samee
Same lmao
Same brother 😂
3:46 Stairway To Heaven
I’m a GHS artist. “I only play with the best “
I use the Burnished roller wound nickel , it’s almost a simiflat wind. I use a custom sizing
10/14/18/26/38/50
Heavy at the bottom , med in the mids , light at the top.
Best most consistent tone I’ve ever had.
🤠🎸🎶🤟✌️
Amazing production!!! All so professional!! Very clear
I loved this video. It was awesome.
Thank you so much!
I like GHS boomers. I've always used nines but the Ibanez jazz guitar I'm playing now came with tens and I loved the way it played and sounded so I'm still using tens on it (but still GHS Boomers). I just put a set of Martin Silk and Bronze (elevens) on my old Framus acoustic and I'm in love but I still want to try a set of La Bella Silk and Steel elevens on it because they've sounded downright magical on every guitar I've heard that used them.
I already have hard calluses but for some reason i really love guage 8 strings.. looking forward to buying Paradigm guage 8 maybe next month because i keep breaking my high e string.. fun fact, i broke 2 sets of guage9 within 3 months.. but when i switched to guage 8 it lasted me half a year before breaking! hahahahaha.. anyway, i have faith in Paradigms.. heck, even slash can't break them.. so hopefully they'll last really long for me. and no i wont switch to a thicker guage because the way i play, i bend the shit out of every guitar i play whether it be mine or not.. i'm practicing to be like a really fast shredder.. and having very light guage strings really helps.
0:32
"Putting acoustic guitar strings on an electric wouldn't sound as good."
Oh I beg to differ, it gives a more mellow sound. Really nice, especially on lower tunings.
lol ...
Always that one guy haha
@@captaindelculo1731
You say it like it's a bad thing...
So, they (acoustic strings) actually work on an electric guitar. I just assumed that acoustic strings didn't have a strong reaction with the pick ups magnets.
@@Reginaldesq
I've had acoustic strings on one of my guitars twice and it has a unique tone, nice when playing mellow things and on slightly lower tunings.
Good video and non-biased, very informative.
This was extremely helpful
You remind me of Chris Pratt.
☑ Good review ❗ I find d'addario generally all around best for acoustic and archtop electric and classical , I also highly favor Elixir brand for acoustic my main genre ; use 12's on acoustic maybe a shade lighter but never heavier ; use 11's on archtop but never lighter ; play finger style most all the time , arpegiated open chords for accompaniment to vocals , not much bends ❗🥸😊
2:38 heavy top low bottom? did you mean light top heavy bottom?
I use Elixars on everything expect my Les Paul ,if you want an extremely high output try Optima s made in Germany and their 24 kt gold plated highest output I've ever seen and they sound so good with tons of gain (Brian May's string of choice) with a Vox AC 30 they are divine .They last tone wise very well .
there is a fourth consideration too. I live onboard a boat in sea water. Coated strings sure do help with corrosion issues
Just what I wanted to learn! Thanks! Gonna try the phosphor bronze on my Martin!
i did mount classical on an acoustic by tying a bunch of knots in the end so they would not come through the holes past the pin, it worked, it sounded alright, but i knew deep down it wasnt. :P
I just listened to my guitar tech. I am now in his band and play 11-56 strings after a lifetime of playing 9's. I don't think I can go back. I don't do a lot of huge bends, so the chugga chugga of metal seems to fit me. Even though I am not a metal guitarist by nature.
I was using earnie ball strings for 10 years!!! And i thought it was normal for your fingers to feel like they’re getting cut from sliding, i swithched yesterday to daddario nyxl 10/46 and i could believe that i can just slide mindlessly without my fingers hurting.
This was insanely helpful, thank you!
So glad to hear that!
How Many Strings Does A Guitar Have > > > missinglinkrecords.com/how-many-strings-does-a-guitar-have/
Love the new vids, keep it up.
Let's see how many people will tell me I'm wrong...
I throw D'Addario's EXL 110 on all of my guitars...
Fender Jaguar? EXL 110.
Fender Jagstang? EXL 110
Yamaha FG-413s? EXL 110.
HK S3991? You guessed it! EXL 110.
Yeah, those last two are (semi-)acoustic, yes I have heard all the warnings about doing this. You know what I also got? Compliments on my acoustic tone from professional players. Also, I do this for about 8 years now, and NEVER has my acoustics been damaged by doing this!
Do with that what you like...
@John I can't say I disagree much with you on that. Not much players tell me the strings themselves suck, and those that do are indeed obsessed with Ernie's.
The criticism I was talking about is along the line of "You can't put those strings on an acoustic! Too much tension will make them warp or even break the bridge off!".
And like I said, I've never encountered this problem myself. But it is good practice to mind tension in regard to different guitars. And it is true, acoustics are prone to damage due to over-tension. So be careful with those!
Electrics are usually more forgiving in that regard. Playability might change, adjustments might be needed but damage is often avoided or easily repairable. Again, that is my experience...
I do not 'advise' anyone to put 'electric'-strings on their acoustic guitars, all I'm saying is that I personally have found no real trouble doing so. Keeping tension fairly medium-low shouldn't damage it. The sound might not be to everyone's liking though... Try at your own risk!
What is missing here is a warning for new players that you can't play steel strings on a classical guitar, since they aren't built with that tension in mind. That's especially important for the target audience for this video.
The next would be stretching the new strings, so they'll stay in tune. Wiping down the strings makes only sense if you wipe down the side facing the frets as well. If the cloth isn't lint-free, you can loose tone when some of it gets stuck between the string windings. "When do players think it's time for some new strings?" would be a good question, since the string changing intervalls differ a LOT depending on the player. Old strings aren't good for the guitar, nor the ear of the player.
What woiuld be the best acoustic steel strings for a beginner - something easy on the fingers?
Don’t think we didn’t notice stairway...
I'd play 9s on an electric. I had an epiphone explorer one time with ernie ball 8s. The bends and wide vibrato I could get on it was malmsteen-esque.
Daddario EJ-16 light gauge Phosphor Bronze .012"-.053" Acoustic strings and Daddario EXL-110 .010"-.046" light gauge Nickel electric strings are the best selling sets ever. Lately though, Daddario has seemed put their money into their various new crappy strings, like their over-priced NYXLs and odd Nickel Bronze Acoustic sets. Not sure why, but I think this was done to combat Ernie Ball's new exotic metal string sets (that also have issues). I've seen a lot of high strings break in the standard Daddario sets lately, which never used to happen, and I install about 25 - 40 sets a week on customer guitars.
On Electric I used 10/46 nickel
On acoustic used 12/52 or 12/54 phosphore bronze
I usually use 10s. I bought a PRS SE c24 off a guy and dropped it off at a shop for a setup. Decided to try 9s. Damn it makes a huge difference. It's like playing with rubber bands! I'll stick with the 10s.
I’m kinda new to guitar and I’m trying to bend on my electric strat. Thought it was just me (could be) but now I’m convinced it’s the strings. They aren’t really bending if that makes sense.
Great video very informative
hi so i’m pretty new to the whole guitar world so i’m not really sure what strings to get. i play a fender strat and i like to play a lot of indie and alt rock songs, any recommendations on what strings to get?? :)
Go 11 or 13s
@@brownpunk1794 thank you! i appreciate it :)
@@esperanzavasquez7327 welcome..happy to help..if u have anymore questions let me know..
I don't know about other players but washing my hand just before playing increases the likelihood of cutting the tips of my fingers. Freshly washed hands are very soft. That's just my personal experience. Of course, I don't dig in the garden then play my guitars. Clean hands are a good practice; just wait a while before playing slides or pulls.
Very informative, nice 👍
Very useful info! Thanks
So my High E string snapped today and I’m new to guitar. So I just wanted to ask if the strings pack have all the strings like “E,B,G...” or do I choose which one I want?
A single pack of strings will have E A D G B E. You can find packs that come in sets of 3. ALWAYS buy a couple sets of strings in case you snap one. I must have about 5 sets for my double neck because it's always the 4th string (G) that snaps first. Hope this helped
Coasterdude02149 that really helped thank you so much
Thank you!
What about using a wound G string on an electric?
Less tuning issues- more tension and weaker sound
@@lucianodebenedictis6014 Thanks. Here's something I found. th-cam.com/video/0ekYC4XJJ_w/w-d-xo.html
The string I loathe the most on my double neck...it's ALWAYS the one that snaps.
I keep it simple. Whatever strings, the manufacturer of the guitar put on are usually the best ones for that particular instrument after the company put a lot of thought into it. Why reinvent the wheel. My fender came with nines and that’s what I use. They sound great.
Did you mean to say you prefer "light tops, heavy bottoms" for your own playing? I've never heard of anyone using "heavy top low bottoms." Heavy tops would make bending the trebles more difficult, and low tension bottoms would give weaker signal for your distorted lower pitches.
Pretty sure he meant "light top, heavy bottom" at 2:38.
naah bro he meant heavy top and light bottom
Ernie Ball's skinny top heavy bottom are my fav.
He meant heavy top, light bottom.
Elixir strings are the best guitar strings out there.
I love Elixir strings, they last a long time and always sound great xD
I’m going to third this! Elixir strings are excellent & have a long life span.
The new D'Addario XT's are awesome. I changed from Elixir to the XT's. On my 000 I play the 12-53s 80/20's and on my J15 11-52 Phosphor Bronze.
Yes, I agree, I baught from this shop guitarloversshop.com/
Elixirs are my favorite as well..I use them on my electrics and acoustics.
Very informative video sir., thanks for the knowledge... anyway, I am using gauge 8 on my Ybanez S420 electric guitar, is it okay? does it match with my guitar? I need your advice.. thank you in advance.
It's up to you.
Don't recommend mediums to someone at a level who doesn't even know what strings they like. They're heavier & require you get your guitar set up for the added tention. Electrics come with 9s, sometimes 10s, stock. Normal acoustics usually always come with 12s stock.
The Austrian company Dr. Thomastik used to make steel strings for classical guitar with a really bright tone, almost like a bell. Bass lines were wrapped with silk and the trebles had a nylon coating. Unfortunately they were discontinued, maybe the price put people off? Almost 50 bucks for a set was a bit much really.
Perfect guide - thank you so much.
Extremely helpful
Thank you
I usually go to Musician's Friend catalog and order lite
Gauge acoustic-electric string packs. They used to be
5 set packs for $10.oo. Perfect for electric guitar. You have to sort out the strings, though, cause there are no
Individual paper sleeve per string.
Use Vaseline or some gel moisturizer on pick ups and strings to prevent it from absorbing moisture ..wipe it play gig then again use moisturizer gels
For electric, I like the 9-46 hybrid. For chugga-chugga. But also soft enough for soloing
Nice info, nickel wound Is bad for rust or not??????
You should stick with the size that the guitar manufacturer recommends for your instrument. My son had a twisted neck on his 12 string from using heavy gage. I was able to straighten it, he was lucky. Also stick with the size strings the guitar was set up with. It could change the relief and effect the action and the nut grooves may be too tight. Heavier strings put more stress on an instrument. Telling folks to put whatever size they want is bad advice in my opinion. I mean no harm with this comment and it is nothing personal, I love StewMac, you guys are the best.
Dude really loves his strings @5:40
2:29 what was the thing that she used on her middle finger?
Yo dawg I hope you know a year later but its called a slider I hope this helps
I have a EVH 5150, and of course I use, 9- 42 Ernie Ball, or EVH, depends which one is in stock
Fantastic advice !
Helpful video thanks,
As a bass player I feel unrepresented
WillWilsonII We “real musicians” understand the importance of keeping the bass player in it’s place, through gaslighting, intimidation, ultimatums, and generally bad life guidance. That way the bass player becomes dependent on the love we never provide them.
It’s basically why you’re not allowed to pet a service dog, despite its high value and years of training. Don’t be nice to the bass player, or you’ll be sorry; it will become Jaco Pastorius, who didn’t understand his place in the hierarchy until he was killed by a bouncer at a club.
On stage, the bass player belongs behind the lead guitarist / singer, to the side of the drummer, who is the house slave of the band.
What’s the difference between a bass player and a pizza? A pizza can feed a family of four.
John Ohkuma-Thiel what’s the difference between a bassist and a guitarist? Guitarists only finger their instruments.
Malcolm Young, Cliff Williams and Phil Rudd. AC/DC lasted as long as they did because the rhythm section knew it's rightful place in the world.
Well this it's a video about guitar strings and not a bass string video! My advice it's instead of typing about guitar strings, there are so many videos of bass strings and anything about bass topics! You are watching the wrong video if you are a bass player!