If your copy remote flashes before it is programmed, it has a previous code in its memory. To clear the code, hold the top two buttons down & the LED will flash. Keep the left button down then release & push the right button 3 times. The LED will flash. Release the left button (both buttons released) The existing code is cleared & you can verify by pushing button & the LED will not flash. Then program the clone.
I brought this and I couldn’t copy the signal. I did all the steps and when I tried to copy the signal it flashed and it the light would come on when I pressed the button but the gate didn’t work
What is the brand, frequency and chip model of your remote control? We have one of the best clone remote controls, which can copy the following brands of remote controls: BENNCA/ALLMATIC, PUJOL2, KEY, FAACRC, BENINCA/ALLMATIC, APRIMATIC, Key_Automation_900TXB-42R, DITEC_GOL/APRIMATIC-TM4, (NICE)SMILO; (ATA) PTX4;( O&O), PUJOL/PUJOL2, FAAC-RC. Compatible chip models are: FP527, 1527, 2240, 2260, 2262, 2264, HT6014, CS5211, SMC5326, SMC918, HT6P20, HT6P21, HT6026, HCS101, HCS201, HCS301 (only compatible with some brands need to be confirmed)
My remote copies the code but, i can program 4 buttons with the same code but every of them works only once and opens the gate, but every next time every button sends the code but it doesn't open the Gate...
Hi, Thanks you for your video. I have a problem to the first step.... :( ! 1) Press and Hold “A” and “B” buttons together - Led will flash 3 times at home, they flash continuously .... when I press A and B together....
Hi IGo, please extend the description under the video for further explanation. Hope it solves your problems. Feel free to ask anything about the video!
It worked 🎉🎉 thanks
If your copy remote flashes before it is programmed, it has a previous code in its memory. To clear the code, hold the top two buttons down & the LED will flash. Keep the left button down then release & push the right button 3 times. The LED will flash. Release the left button (both buttons released) The existing code is cleared & you can verify by pushing button & the LED will not flash. Then program the clone.
24-01-2020 UPRAVO URADIO ISTO, I NOVI TASTER RADIII!!! :))) TENKS FOR VIDOJA!!! :DDD
Will a blue light copier clone a red light original and operational remote ?
I brought this and I couldn’t copy the signal. I did all the steps and when I tried to copy the signal it flashed and it the light would come on when I pressed the button but the gate didn’t work
Existe algum controle q nao funciona no qiachip? Segui os procedimento e o portao de casa nao abre. Acende a luz no controle mas nao abre.
Hi. Actually my remote was lost. Can I buy any brand universal remote and clone with the my house mates remote?
What is the brand, frequency and chip model of your remote control?
We have one of the best clone remote controls, which can copy the following brands of remote controls:
BENNCA/ALLMATIC, PUJOL2, KEY, FAACRC, BENINCA/ALLMATIC, APRIMATIC, Key_Automation_900TXB-42R, DITEC_GOL/APRIMATIC-TM4, (NICE)SMILO; (ATA) PTX4;( O&O), PUJOL/PUJOL2, FAAC-RC.
Compatible chip models are: FP527, 1527, 2240, 2260, 2262, 2264, HT6014, CS5211, SMC5326,
SMC918, HT6P20, HT6P21, HT6026, HCS101, HCS201, HCS301 (only compatible with some brands need to be confirmed)
My remote copies the code but, i can program 4 buttons with the same code but every of them works only once and opens the gate, but every next time every button sends the code but it doesn't open the Gate...
Eso es lo que me ocurre a mi... lo conseguistes solucionar !!!!
Hi, Thanks you for your video. I have a problem to the first step.... :( !
1) Press and Hold “A” and “B” buttons together - Led will flash 3 times
at home, they flash continuously .... when I press A and B together....
@Nicolas Wattiaux Same here. Have you found a solution?
I've the same problem as Peter T. Press A&B blue LED flashes immediately and continuously. Any solution please ?
Apparently, no solution, my two also won't clear
Done this over and over - no result. Am guessing the supplier knows this and don't care?
Whats. Remot 3315 hz
Mine won't record new code. JUNK, don't buy
This is useless. No explanation of what is being done.
Hi IGo, please extend the description under the video for further explanation. Hope it solves your problems. Feel free to ask anything about the video!
#Cametopnewestvideo
Too bad it never worked for our Kia and Hyundai. Crappy copier!!