fibre glass warranty 12 years @SaharaWaterproofingCo

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 พ.ย. 2024
  • / @saharawaterproofingco
    no1waterproofingcontractorinindia
    #sika #fosroc #basf #cico #paints #waterproofingsolutions #waterproofingexpertise #roofwaterproofing #waterproofingcontractorsinbangalore #Basf#Epdm #Basf
    Dr Fixit Fiber mesh Epoxy Fosroc Pidifin 2k Pidilite Sika Terrace Waterproofing Waterproofing contractorWaterproofing services waterproofing contractors in hyderabad app membrane sbs membrane Tpo Membrane bitumen membrane Rubber coating
    fibre glass mesh waterproofing solutions with warranty of 12 years ‎@SaharaWaterproofingCo #drfixit
    Glass fiber mesh waterproofing treatment
    👇
    Cleaning the surface and preparation etc Grove the crack with machine cleaning the surface filling with PMM Dr Fixit methodology above that application
    👇
    apply #DrFixitURP or Primeseal A on the well prepared groove, allow to cure tack free. Followed by filling the all joints covering the entire area uniformly with suitable chemical . Allow chemical to cure a minimum 24 hours. Apply minimum 50mm - 100 mm width 45 GMS Glass Fibre Mesh / non-woven geo textile fleece with the coat of Dr. Fixit Roofseal Classic along the length of crack when the 1st coat is still in wet condition. Apply the second coat with an interval if 4-6 hours. Waterproofing: Apply a coat of Dr. Fixit Roofseal Classic (diluted with water in the ratio 2:1) as Self Priming 14.0 - 18.0 Sq.mt / litre. Allow coating to dry for 3-4 hours. Apply two coats of Dr. Fixit Roofseal Classic / litre / coat, without , the rate of application being the same for both the coats. This would ensure correct consumption of material that will deliver a total DFT of microns. Allow the system to air cure for 5 days minimum. Check to see no void surface is left untreated / uncoated. The material having following technical Specification as per ASTM D 6083 M - Type II, Attains a Tensile Strength of 2.5 N/mm2 confirming to ASTM D 2370; Elongation at break ≥ 300% confirming ASTM D 2370, Adhesion to Concrete 2.0 N/mm2 confirming ASTM D 4541 and Crack bridging ability up to 2 mm, Air cure the coating for 7 days, before water pound test for 48 hrs. The system comes with 10 years waterproofing warranty from service provider . For vertical surfaces: Apply a 2 coat of Dr. Fixit Roofseal Classic with forced coverage of / litre / Coat. Entire terrace should be coated with Roofseal Classic along with parapet walls needs to be enveloped with Roofseal Classic / system. The Total 4coats treatment
    Total 7 layer solutions
    Contact us today 9901741694
    #9901741694

ความคิดเห็น • 4

  • @SaharaWaterproofingCo
    @SaharaWaterproofingCo  ปีที่แล้ว +1

    ❤Please subscribe my channel and like with share thanks for watching

  • @funsports3642
    @funsports3642 ปีที่แล้ว +1

    Best waterproofing contractor

  • @thewatershield
    @thewatershield ปีที่แล้ว +1

    Best waterproofing treatment

  • @SaharaWaterproofingCo
    @SaharaWaterproofingCo  ปีที่แล้ว +1

    Hi Everyone please subscribe my channel and like with share thanks for watching