Hello, nice video! The white plastic removal to create space to remove the blower wheel can be also applied to a perfera 2021+? I saw some videos but they bend too much. Cleaning the blower wheel without removing is tedious, last time I used baby bottle cleaner brushes. The blower wheel can be removed from the right side?
I don't think the fan fits out from the right side. It might be tedious but with right equipment there is a way to clean it with water spray. Removing the fan can be too much for some people. We are going to do disassembly from Perfera too but structurally they are very similar.
Hey - great video! Just had 5 stylish units installed myself and all of them have a high pitched "buzz" noise that sounds to be coming from the right side of the fan. Only happens when fan is spinning, and doesnt seem to get more/less loud on different fan speeds. Also happens when in fan only mode, so have ruled out it being refrigerant line noise. Do all the stylish units have this noise? Asking as you mentioned that debris on the magnetic part of the fan can cause noise - could this be it? Odd that it is happening on all 5 units though... Thanks!
So, I'm making a commitment. The company that have installed my AC unit are completely incompetent in maintain it. I had, in 4 y, 6 water damage due to clogged condensation and the axial blade have been covered in mold for 2Y now. They say it's impossible with the stylish unit to remove the axial fan without purging the cooling gas first, something they refuse to do because of cost. You showed me otherwise ... If I can get that fan out of at least one unit, i'm sending you a mail for a small 50€ donation, and cleaning it with my power washer. It may still not be possible because i have a wall on the left side of all unit... but now i have hope !
Sadly i don't have enough space to pull it ... I'm now trying to get any info about how i can remove the unit while leaving the radiator on the wall, or at least only the drain pan. But i can't get my hand on the technical manual :(
@@vlycop7404 You can't remove the whole unit without the radiator, you will need to pump down the refrigerant and after that you can remove the indoor unit from the wall
It is possible to wash fan blades without removing them. Units can often be forced tilt by lifting it in place from its backplate. All of these tricks should be known by maintenance persons.
Hello, nice video! The white plastic removal to create space to remove the blower wheel can be also applied to a perfera 2021+? I saw some videos but they bend too much. Cleaning the blower wheel without removing is tedious, last time I used baby bottle cleaner brushes. The blower wheel can be removed from the right side?
I don't think the fan fits out from the right side. It might be tedious but with right equipment there is a way to clean it with water spray. Removing the fan can be too much for some people. We are going to do disassembly from Perfera too but structurally they are very similar.
Hey - great video! Just had 5 stylish units installed myself and all of them have a high pitched "buzz" noise that sounds to be coming from the right side of the fan. Only happens when fan is spinning, and doesnt seem to get more/less loud on different fan speeds. Also happens when in fan only mode, so have ruled out it being refrigerant line noise. Do all the stylish units have this noise? Asking as you mentioned that debris on the magnetic part of the fan can cause noise - could this be it? Odd that it is happening on all 5 units though...
Thanks!
maybe this is stupide ... but did you leave the streamer on ? it make a high pitch buzz, only when the fan is running
So, I'm making a commitment.
The company that have installed my AC unit are completely incompetent in maintain it. I had, in 4 y, 6 water damage due to clogged condensation and the axial blade have been covered in mold for 2Y now.
They say it's impossible with the stylish unit to remove the axial fan without purging the cooling gas first, something they refuse to do because of cost.
You showed me otherwise ... If I can get that fan out of at least one unit, i'm sending you a mail for a small 50€ donation, and cleaning it with my power washer.
It may still not be possible because i have a wall on the left side of all unit... but now i have hope !
Sadly i don't have enough space to pull it ...
I'm now trying to get any info about how i can remove the unit while leaving the radiator on the wall, or at least only the drain pan.
But i can't get my hand on the technical manual :(
I managed to remove the motor, but they are plastic bit that stop the fan from coming out from the right 😢
I can't get the yellow plastic cover off :(
@@vlycop7404 You can't remove the whole unit without the radiator, you will need to pump down the refrigerant and after that you can remove the indoor unit from the wall
It is possible to wash fan blades without removing them. Units can often be forced tilt by lifting it in place from its backplate. All of these tricks should be known by maintenance persons.